JennAir W11312047, W11312048, W11290015, W11300447 Installation Guide

INSTALLATION INSTRUCTIONS

SIDE TRIM COVER KIT FOR

ELECTRIC BUILT-IN SINGLE OVEN, MICROWAVE, OR

COFFEE MACHINE

Built-In Single Oven Side Trim Cover Kit W11312047

for 27" (68.6 cm) and 30" (76.2 cm) cabinets

For use with model : JJW2424HM

Built-In Single Oven Side Trim Cover Kit W11312048

for 27" (68.6 cm) and 30" (76.2 cm) cabinets

For use with model : JJW2424HL

Built-In Single Oven, Microwave and Coffee Machine Side Trim Cover Kit W11290015

for 27" (68.6 cm) and 30" (76.2 cm) cabinets

For use with models : JJW6024HM, JMC6224HM, JJB6424HM

Built-In Single Oven, Microwave and Coffee Machine Side Trim Cover Kit W11300447

for 27" (68.6 cm) and 30" (76.2 cm) cabinets

For use with models : JJW6024HL, JMC6224HL, JJB6424HL

INSTRUCTIONS D’INSTALLATION

ENSEMBLE DE GARNITURES DÉCORATIVES

LATÉRALES POUR FOUR ÉLECTRIQUE SIMPLE, FOUR

ÀMICRO-ONDES OU MACHINE À CAFÉ ENCASTRÉS

Ensemble de garnitures décoratives latérales pour four simple encastré W11312047

dontl’armoire mesure 27po (68,6cm) ou 30po (76,2 cm)

Pour utilisation avec le modèle : JJW2424HM

Ensemble de garnitures décoratives latérales pour four simple encastré W11312048

dontl’armoire mesure 27po (68,6cm) ou 30po (76,2 cm)

Pour utilisation avec le modèle : JJW2424HL

Ensemble de garnitures décoratives latérales pour four simple, four à micro-ondes et machine

à café encastrés W11290015 dont l’armoire mesure 27po (68,6cm) ou 30po (76,2 cm)

Pour utilisation avec les modèles : JJW6024HM, JMC6224HM et JJB6424HM

Ensemble de garnitures décoratives latérales pour four simple, four à micro-ondes et machine

à café encastrés W11300447 dont l’armoire mesure 27po (68,6cm) ou 30po (76,2 cm)

Pour utilisation avec les modèles : JJW6024HL, JMC6224HL et JJB6424HL

Table of Contents/Table des matières

BUILT-IN SINGLE OVEN, MICROWAVE OR

COFFEE MACHINE SAFETY .........................................................2

INSTALLATION REQUIREMENTS .................................................2

Tools and Parts ............................................................................. 2

Location Requirements ................................................................2

INSTALLATION INSTRUCTIONS ...................................................3

Install Side Trim Cover Kit for Built-In Oven, Steam,

Microwave, or Coffee Machine ....................................................3

Install Electric Built-in Single Oven or Microwave .......................4

Install Coffee System ...................................................................4

Complete Installation ...................................................................6

W11311036B

MESURES DE SÉCURITÉ RELATIVES AUX FOUR SIMPLE, FOUR À MICRO-ONDES OU MACHINE À

CAFÉ ENCASTRÉS .........................................................................7

EXIGENCES D’INSTALLATION .....................................................7

Outils et pièces .............................................................................7

Exigences d’emplacement ...........................................................7

INSTRUCTIONS D’INSTALLATION ...............................................8

Installation de l’ensemble de garnitures décoratives latéralespour four simple, fouràinjection de vapeur,

fouràmicro-ondes ou machine à café encastrés .......................8

Installation d’un four simple électrique ou d’un four

àmicro-ondes encastrés .............................................................9

Installation du système infuseur à café .......................................9

Terminer l’installation .................................................................. 11

BUILT-IN SINGLE OVEN, MICROWAVE OR

COFFEE MACHINE SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

You can be killed or seriously injured if you don't immediately

DANGER

WARNING

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

follow instructions.

You

can be killed or seriously injured if you don't

instructions.

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools needed

■ Phillips screwdriver

■ Measuring tape

Parts supplied

■ Level

■ Hex head or at-blade

screwdriver

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

■ Follow the instructions below along with the instructions in

the built-in oven, microwave or coffee machine Installation Instructions.

Product Dimensions

Side Trim Cover Kits

CBA

A. Mounting jig B. Trim surface (2 per 27" (68.6 cm) and

2 per 30" (76.2 cm) cabinets)

C. Trim structure (2 per 27" (68.6 cm) and

2 per 30" (76.2 cm) cabinets)

D. 2 Self Drilling

Screws E. 8 Wood Screws F. 2 Hex Head

screws

Single Built-In Oven L1 = 2329/64" (59.6 cm) Microwave Built-In Oven L2 = 1727⁄32" (45.3 cm) For 27" (68.6 cm) cabinet W1 = 111⁄ For 30" (76.2 cm) cabinet W2 = 31⁄4 " (8.2 cm)

16 "

(4.3 cm)

Cabinet Dimensions

Refer the below dimensions along with the dimensions in the built-in oven, microwave or coffee machine dimension guide.

Single Built-In Oven, Microwave or Coffee Machine

Pyro Wall Oven A = 2213⁄16" (58 cm)

A = 1711⁄16" (45 cm)

INSTALLATION INSTRUCTIONS

Install Side Trim Cover Kit for Built-In Oven, Steam, Microwave, or Coffee Machine

Follow the instructions below to install the Side Trim Cover Kit on a built-in oven steam, microwave, or coffee machine.

1. Center the mounting jig horizontally in the cabinet opening, place it ush against the cabinet opening, and secure it with two Phillips screws as shown.

3. Align each trim structure/surface assembly with the cabinet as shown and attach each with four Phillips screws.

A. Mounting jig B. Phillips screws

2. Attach each trim surface to the trim structure with hex-head screws at the top and bottom. Do not tighten the screws completely.

Alignment with

side surface

Alignment with

front surface

A. Trim Structure B. Hex head screw C. Trim Surface

4. Adjust the trim structure/surface assemblies horizontally to

BBA

touch the side surfaces of the mounting jig. Tighten the hex-head screws at the top of each assembly.

Install Electric Built-in Single Oven or

Microwave

1. Using two or more people, push against the seal area of the front frame to push the oven into the cabinet until the back surface of the front frame touches the front wall of the cabinet.

A. Mounting jig B. Trim structure/surface assembly

5. Remove the mounting jig from the cabinet opening. Tighten the hex-head screws at the bottom of each trim structure/surface assembly.

A. Trim structure/surface assembly

2. Securely fasten oven to cabinet using the screws provided. Insert the self drilling screws through hole in the side trim cover. Do not overtighten screws.

3. Follow the oven Installation Instructions to complete installation.

NOTE: If the built-in oven was not installed into the cabinet, read the “Electrical Requirements” and “Electrical Connection” sections, along with all other sections of the Installation Instructions, before installing the oven.

4. Reconnect power.

5. If the display panel does not light, reference the “Assistance

or Service” section of the Use and Care Guide, or contact the dealer from whom you purchased your oven.

Install Coffee System

Install the Mounting Brackets

1. Determine where the mounting brackets will be installed and mark 6 holes through each mounting bracket onto the side cabinet.

IMPORTANT: The front of the mounting bracket must be 1/16" (2 mm) from the outside of the cabinet frame.

NOTE: To accommodate for ush installation with certain custom cabinets, align the front of the mounting brackets 13/16" (2.1 cm) back from the front of the cabinet.

1/16" (2 mm)

A. Front of mounting bracket 1/16" (2 mm)

from outside of cabinet frame

B. Mark 6 screw holes.

(=)

+ 8 hidden pages