INSTALLATION INSTRUCTIONS
SIDE TRIM COVER KIT FOR
ELECTRIC BUILT-IN SINGLE OVEN, MICROWAVE, OR
COFFEE MACHINE
Built-In Single Oven Side Trim Cover Kit W11312047 for 27" (68.6 cm) and 30" (76.2 cm) cabinets
For use with model : JJW2424HM
Built-In Single Oven Side Trim Cover Kit W11312048 for 27" (68.6 cm) and 30" (76.2 cm) cabinets
For use with model : JJW2424HL
Built-In Single Oven, Microwave and Coffee Machine Side Trim Cover Kit W11290015 for 27" (68.6 cm) and 30" (76.2 cm) cabinets
For use with models : JJW6024HM, JMC6224HM, JJB6424HM
Built-In Single Oven, Microwave and Coffee Machine Side Trim Cover Kit W11300447 for 27" (68.6 cm) and 30" (76.2 cm) cabinets
For use with models : JJW6024HL, JMC6224HL, JJB6424HL
INSTRUCTIONS D’INSTALLATION
ENSEMBLE DE GARNITURES DÉCORATIVES
LATÉRALES POUR FOUR ÉLECTRIQUE SIMPLE, FOUR À MICRO ONDES OU MACHINE À CAFÉ ENCASTRÉS
Ensemble de garnitures décoratives latérales pour four simple encastré W11312047 dont l’armoire mesure 27 po (68,6 cm) ou 30 po (76,2 cm)
Pour utilisation avec le modèle : JJW2424HM
Ensemble de garnitures décoratives latérales pour four simple encastré W11312048 dont l’armoire mesure 27 po (68,6 cm) ou 30 po (76,2 cm)
Pour utilisation avec le modèle : JJW2424HL
Ensemble de garnitures décoratives latérales pour four simple, four à micro-ondes et machine à café encastrés W11290015 dont l’armoire mesure 27 po (68,6 cm) ou 30 po (76,2 cm)
Pour utilisation avec les modèles : JJW6024HM, JMC6224HM et JJB6424HM
Ensemble de garnitures décoratives latérales pour four simple, four à micro-ondes et machine à café encastrés W11300447 dont l’armoire mesure 27 po (68,6 cm) ou 30 po (76,2 cm)
Pour utilisation avec les modèles : JJW6024HL, JMC6224HL et JJB6424HL
Table of Contents/Table des matières
BUILT-IN SINGLE OVEN, MICROWAVE OR |
|
COFFEE MACHINE SAFETY.......................................................... |
2 |
INSTALLATION REQUIREMENTS................................................. |
2 |
Tools and Parts............................................................................. |
2 |
Location Requirements................................................................. |
2 |
INSTALLATION INSTRUCTIONS................................................... |
3 |
Install Side Trim Cover Kit for Built-In Oven, Steam, |
|
Microwave, or Coffee Machine..................................................... |
3 |
Install Electric Built-in Single Oven or Microwave........................ |
4 |
Install Coffee System.................................................................... |
4 |
Complete Installation.................................................................... |
6 |
MESURES DE SÉCURITÉ RELATIVES AUX FOUR SIMPLE, |
|
FOUR À MICRO-ONDES OU MACHINE À |
|
CAFÉ ENCASTRÉS......................................................................... |
7 |
EXIGENCES D’INSTALLATION...................................................... |
7 |
Outils et pièces............................................................................. |
7 |
Exigences d’emplacement........................................................... |
7 |
INSTRUCTIONS D’INSTALLATION............................................... |
8 |
Installation de l’ensemble de garnitures décoratives |
|
latérales pour four simple, four à injection de vapeur, |
|
four à micro-ondes ou machine à café encastrés........................ |
8 |
Installation d’un four simple électrique ou d’un four |
|
à micro ondes encastrés.............................................................. |
9 |
Installation du système infuseur à café........................................ |
9 |
Terminer l’installation.................................................................. |
11 |
W11311036B
BUILT-IN SINGLE OVEN, MICROWAVE OR
COFFEE MACHINE SAFETY
Your safety and the safety of others are very important.
many important safety messages in this manual and on your appliance. Always read and obey all safety
safety alert symbol.
alerts you to potential hazards that can kill or hurt you and others.
messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
mean:
DANGER WARNING
You can be killed or seriously injured if you don't immediately follow instructions.
You can be killed or seriously injured if you don't follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
Tools needed
■■ |
Phillips screwdriver |
■■ |
Level |
■■ |
Measuring tape |
■■ |
Hex head or flat-blade |
|
|
|
screwdriver |
Parts supplied
D
E
F
A |
B |
C |
|
|
|
A. Mounting jig |
|
|
D. |
2 |
Self Drilling |
B. Trim surface (2 per 27" (68.6 cm) and |
|
Screws |
|||
2 per 30" (76.2 cm) cabinets) |
|
E. |
8 |
Wood Screws |
|
C. Trim structure (2 per 27" (68.6 cm) and |
F. |
2 |
Hex Head |
||
2 per 30" (76.2 cm) cabinets) |
|
|
screws |
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
■■ Follow the instructions below along with the instructions in the built-in oven, microwave or coffee machine Installation Instructions.
Product Dimensions
Side Trim Cover Kits
W1
L1
|
W1 |
L2 |
|
|
W2 |
L1 |
|
|
W2 |
L2 |
|
Single Built-In Oven |
L1 = 2329/64" (59.6 cm) |
Microwave Built-In Oven |
L2 = 1727⁄32" (45.3 cm) |
For 27" (68.6 cm) cabinet |
W1 = 111⁄16 " (4.3 cm) |
For 30" (76.2 cm) cabinet |
W2 = 31⁄4 " (8.2 cm) |
2
Cabinet Dimensions
A
Refer the below dimensions along with the dimensions in the built-in oven, microwave or coffee machine dimension guide.
Single Built-In Oven, |
A = 1711⁄16" (45 cm) |
Microwave or Coffee |
|
Machine |
|
|
|
Pyro Wall Oven |
A = 2213⁄16" (58 cm) |
INSTALLATION INSTRUCTIONS
Install SideTrim Cover Kit for Built-In Oven, Steam, Microwave, or Coffee Machine
Follow the instructions below to install the Side Trim Cover Kit on a built-in oven steam, microwave, or coffee machine.
1.Center the mounting jig horizontally in the cabinet opening, place it flush against the cabinet opening, and secure it with two Phillips screws as shown.
3.Align each trim structure/surface assembly with the cabinet as shown and attach each with four Phillips screws.
B
A
B
A.Mounting jig
B.Phillips screws
2.Attach each trim surface to the trim structure with hex-head screws at the top and bottom. Do not tighten the screws completely.
Alignment with side surface
Alignment with front surface
A
B C
A.Trim Structure
B.Hex head screw
C.Trim Surface
3
4.Adjust the trim structure/surface assemblies horizontally to touch the side surfaces of the mounting jig. Tighten the hex-head screws at the top of each assembly.
Install Electric Built-in Single Oven or Microwave
1.Using two or more people, push against the seal area of the front frame to push the oven into the cabinet until the back surface of the front frame touches the front wall of the cabinet.
B A B
A.Mounting jig
B.Trim structure/surface assembly
5.Remove the mounting jig from the cabinet opening. Tighten the hex-head screws at the bottom of each trim structure/surface assembly.
A
A. Trim structure/surface assembly
2.Securely fasten oven to cabinet using the screws provided. Insert the self drilling screws through hole in the side trim cover. Do not overtighten screws.
3.Follow the oven Installation Instructions to complete installation.
NOTE: If the built-in oven was not installed into the cabinet, read the “Electrical Requirements” and “Electrical Connection” sections, along with all other sections of the Installation Instructions, before installing the oven.
4.Reconnect power.
5.If the display panel does not light, reference the “Assistance or Service” section of the Use and Care Guide, or contact the dealer from whom you purchased your oven.
Install Coffee System
Install the Mounting Brackets
1.Determine where the mounting brackets will be installed and mark 6 holes through each mounting bracket onto the side cabinet.
IMPORTANT: The front of the mounting bracket must be 1/16" (2 mm) from the outside of the cabinet frame.
NOTE: To accommodate for flush installation with certain custom cabinets, align the front of the mounting brackets 13/16" (2.1 cm) back from the front of the cabinet.
|
<![if ! IE]> <![endif]>1/16" (2 mm) |
|
|
(=) |
(=) |
A |
|
|
|
|
B
B
A.Front of mounting bracket 1/16" (2 mm) from outside of cabinet frame
B.Mark 6 screw holes.
4