Jenn-Air W10663564, JBSFS42NHL, JBSFS42NHM, JBSFS48NHL, JBSFS48NHM Owner's Manual
iNstall
SIDE BY SIDE
BUILTIN REFRIGERATOR
RÉFRIGÉRATEUR ENCASTRÉ
CÔTE À CÔTE
For questions about features, operation/performance, parts, accessories, or service, call:
1-800-JENNAIR (1-800-536-6247) or visit our website at www.jennair.com.
In Canada, call: 1-800-JENNAIR (1-800-536-6247), or visit our website at www.jennair.ca.
Pour des questions à propos des caractéristiques, du fonctionnement/rendement, des pièces, accessoires ou service,
composer le: 1800JENNAIR (1800536-6247) ou visiter notre site Web au www.jennair.com.
Au Canada, composer le: 1800JENNAIR (1800536-6247) ou visiter notre site Web au www.jennair.ca.
W10779523B
TABLE OF CONTENTS
TABLE DES MATIÈRES
INTRODUCTION
REFRIGERATOR SAFETY .........................................................................3
VARIANTS AND ACCESSORIES
42" MODELS .....................................................................................................4
48" MODELS ....................................................................................................5
INSTALLATION REQUIREMENTS
Tools and Parts ...............................................................................................6
Location Requirements ...........................................................................7
Electrical Requirements ..........................................................................8
Water Supply Requirements ................................................................9
Product Dimensions ..................................................................................9
Door Swing Dimensions .........................................................................10
Permissible Installation Options........................................................11
Stainless Steel Panel Kit
Installation Requirements .....................................................................11
Custom Wood panel dimensions and installation
requirements ..................................................................................................11
INSTALLATION INSTRUCTIONS
Unpack the Refrigerator .........................................................................12
Move the Refrigerator into House ....................................................12
Install Anti-Tip Boards ...............................................................................12
Connect the Water Supply ....................................................................13
Plug in Refrigerator ....................................................................................15
Install Side Trims ...........................................................................................15
Move Refrigerator to Final
Location ..............................................................................................................16
Level and Align Refrigerator ................................................................17
Install Base Grille ..........................................................................................17
Complete Installation ................................................................................18
INTRODUCTION
SÉCURITÉ DU RÉFRIGÉRATEUR ........................................................19
VARIANTES ET ACCESSOIRES
MODÈLES DE 42po....................................................................................20
MODÈLES DE 48po ...................................................................................21
EXIGENCES D’INSTALLATION
Outils et pièces ..............................................................................................22
Exigences d’emplacement ....................................................................23
Spécifications électriques ......................................................................24
Spécifications de l’alimentation eneau .......................................25
Dimensions du produit ............................................................................25
Dimensions pour l’ouverture desportes .....................................26
Options d’installations permises .......................................................27
Exigences d’installation de l’ensemble de panneaux en
acierinoxydable ............................................................................................27
Exigences d’installation et dimensions des panneaux de
boispersonnalisés .......................................................................................27
INSTRUCTIONS D’INSTALLATION
Déballage du réfrigérateur ...................................................................28
Déplacement du réfrigérateur dans le domicile ...................28
Installation de planches antibasculement .................................28
Raccordement à la canalisation d’eau ..........................................29
Brancher le réfrigérateur ........................................................................31
Installation des garnitures latérales ................................................31
Déplacement du réfrigérateur àson emplacement
définitif ................................................................................................................32
Réglage de l’aplomb et alignement du réfrigérateur ........33
Installation de la grille de la base ......................................................34
Terminer l’installation ................................................................................34
2
INTRODUCTION
REFRIGERATOR SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
You can be killed or seriously injured if you don't immediately
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
follow instructions.
You
can be killed or seriously injured if you don't
instructions.
follow
WARNING
Tip Over Hazard
Refrigerator is top heavy and tips easily when not
completely installed.
Keep doors taped closed until refrigerator is
completely installed.
Use two or more people to move and install
refrigerator.
Failure to do so can result in death or serious injury.
3
VARIANTS AND ACCESSORIES
42" MODELS
CUSTOMMADE PANEL DESIGN
RISE™ STAINLESS DESIGN
Features custom-made panels and custom hardware
provided by the cabinetmaker for a seamless appearance
designed to blend with existing kitchen cabinetry.
Base Model Numbers: JS42NXFXDE
ARMOIRE KIT NUMBER: W10663564
NOIR™ STYLE STAINLESS DESIGN
Features stainless steel wrapped doors and RISE™
handles with diamond-etched grip.
Base Model Numbers: JS42NXFXDE
Panel Kit Model Numbers: JBSFS42NHL
ACCESSORIES
All factory parts are available through your JennAir dealer
or by calling JennAir at 1-800-JENNAIR (1-800-536-6247).
In Canada, call 1-800-536-6247.
DOOR HANDLE KITS
For custom wood overlay panels only, handle kits can be
ordered. Follow the kit instructions for installation.
Handle Kits contain two handles per kit.
IMPORTANT : These handle kits are not intended for use
with stainless steel door panel kits.
RISE™ Stainless Steel - W11231243
NOIR™ Stainless Steel - W11194770
ARMOIRESTYLE DOOR PANEL KIT
Refer to the installation instructions that come with the
Armoire kit for custom wood overlay panel dimensions
and installation details.
42" Model - W10663564
Features stainless steel wrapped doors with new NOIR™
handles designed to compliment the JennAir® Euro
kitchen suite or enhance any kitchen decor.
Base Model Numbers: JS42NXFXDE
Panel Kit Model Numbers: JBSFS42NHM
4
48" MODELS
CUSTOMMADE PANEL DESIGN
RISE™ STAINLESS DESIGN
Features custom-made panels and custom hardware
provided by the cabinetmaker for a seamless appearance
designed to blend with existing kitchen cabinetry.
Base Model Numbers: JS48NXFXDE
ARMOIRE KIT NUMBER: W10663564
NOIR™ STAINLESS DESIGN
Features stainless steel wrapped doors and RISE™
handles with diamond-etched grip.
Base Model Numbers: JS48NXFXDE
Panel Kit Model Numbers: JBSFS48NHL
ACCESSORIES
All factory parts are available through your JennAir dealer
or by calling JennAir at 1-800-JENNAIR (1-800-536-6247).
In Canada, call 1-800-536-6247.
DOOR HANDLE KITS
For custom wood overlay panels only, handle kits can be
ordered. Follow the kit instructions for installation.
Handle Kits contain two handles per kit.
IMPORTANT : These handle kits are not intended for use
with stainless steel door panel kits.
RISE™ Stainless Steel - W11231243
NOIR™ Stainless Steel - W11194770
ARMOIRESTYLE DOOR PANEL KIT
Refer to the installation instructions that come with the
Armoire kit for custom wood overlay panel dimensions
and installation details.
48" Model - W10663565
Features stainless steel wrapped doors with new NOIR™
handles designed to compliment the JennAir® Euro
kitchen suite or enhance any kitchen decor.
Base Model Numbers: JS48NXFXDE
Panel Kit Model Numbers: JBSFS48NHM
5
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
IMPORTANT :
Installer: Leave Installation Instructions with the
homeowner.
Homeowner: Keep Installation Instructions for future
reference. Save these Installation Instructions for the
local electrical inspector’s use.
TOOLS NEEDED:
Gather the required tools and parts before starting
installation. Read and follow the instructions provided
with any tools listed here.
Cordless drill
Drill bits
Adjustable wrenches (2)
Phillips screwdriver
Small level
3/32" hex key (panel kits only)
11/32" nut driver
3/8" and 1/2" open-end wrenches
5/32" and 3/16" hex key
1/4" and 5/16" socket drivers
Tape measure
Utility knife
Tape (painters)
Appliance dolly
PARTS NEEDED:
#8 x 3" (7.6 cm) wood screws (longer screws may be
needed) (6)
2" x 4" x 32" (5 cm x 10 cm x 81 cm) wood boards (2)
Custom wood overlay panels—consult a qualified
cabinetmaker or carpenter to make the custom wood
panels. See “Custom Wood Overlay Panels” for more
information.
OR
“Panel Kit Installation Requirements” for panel kit
information.
Flexible, codes approved water supply tubing, a
ferrule, a union and a 1/4" (6.35 mm) compression
fitting.
PARTS PROVIDED:
Phillips-head flat screw
8281252 (28)
Door Adjustment Pin
(preinstalled)
W10234194 (2)
Standard Integrated
Grille Bracket
W10182743 - Left (1)
W10182741 - Right (1)
Fully Integrated
Grille Bracket
W10260890 - Left (1)
W10260891 - Right (1)
Panel top bracket
W10667450 (2)
RC Hinge Cover Trim
W10775725 - 42" SxS
W10775726 - 48" SxS
Round-head screw
1163283 (24)
Door Stop Pin
W10234202 (2)
Panel templates
W10488101 - 42" SxS
W10488113 - 48" SxS
W10744761 - Grille
Filler Board “L” Bracket
W10234199 (2)
Top Grille Lower Trim
W10606812 - 42" SxS (1)
W10740171 - 48" SxS (1)
FC Hinge Cover Trim
W10775727 - 42" SxS
W10775728 - 48" SxS
Slotted hex-head screw
W10141645 (21)
Hex-head blunt screw
W10142233 (4)
6
Hex-head pointed screw
W10141189 (8)
Shoulder washer (use with
hex-head pointed screw)
W10471946 (4)
Handle Side Door Trim
W10749614 - SxS Freezer
W10755284 - SxS
Refrigerator
Installation block
W10234156
Grille - Bottom / Skirt - Grille
W10182718 / W10188551 48" SxS
W10182717 / W10188549 42" SxS
LOCATION REQUIREMENTS
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or fire.
IMPORTANT : This refrigerator is designed for indoor,
household use only.
This appliance is intended to be used in household and
similar applications such as:
Staff kitchen areas in shops, offices and other working
environments.
Farm houses and by clients in hotels, motels and
other residential type environments.
Bed and breakfast type environments.
Catering and similar non-retail applications.
NOTE : The refrigerator is intended for use in a location
where the temperature ranges from a minimum of
55°F (13°C) to a maximum of 110°F (43°C). The preferred
room temperature range for optimum performance,
which reduces electricity usage and provides superior
cooling, is between 60°F (15°C) and 90°F (32°C). It is
recommended that you do not install the refrigerator
near a heat source, such as an oven or radiator.
Observe all governing codes and ordinances.
It is recommended that you do not install the
refrigerator near an oven, radiator, or other heat
source.
Do not install in a location where the temperature will
fall below 55°F (13°C).
Floor must support the refrigerator weight, more
than 600 lbs (272 kg), door panels and contents of
the refrigerator. Flooring under refrigerator must be
at same level as the room. Face of cabinetry must be
plumb.
Location should permit door to open fully. See “Door
Swing Dimensions.”
Location must permit top grille removal. See
“Opening Dimensions.”
OPENING DIMENSIONS
IMPORTANT :
The width of the opening (Width A), from side to side,
must be as specified for your model for at least
2" (5.08 cm) back from the face of the cabinet.
NOTE : If your opening does not meet this requirement,
you will need to make modifications.
A solid soffit or wall cabinet must be installed
84" (213.4 cm) above the floor. If the solid soffit is
higher than 84" (213.4 cm) or one is not available, then
the refrigerator must be braced.
If anti-tip boards are needed, they must be installed
to the rear wall studs so that the bottom of the
anti-tip board is 84" (213.4 cm) from the floor. See
“Install Anti-Tip Boards” for more information.
NOTES :
Do not remove the foam gasket from the top of the
compressor cover unless removal is necessary to fit
the unit under a soffit. Removal of the gasket will
cause loss in cooling efficiency.
If installing under a solid soffit, after installation raise
the leveling legs so that the gasket is pressed snugly
against the soffit.
A
B
A. Gasket
B. Compressor cover
A grounded 3 prong electrical outlet should be
located within a specified number of inches from
the right-hand side cabinets or end panel. See the
chart following the graphic for the number of inches
required for your model. For more information, see
“Electrical Requirements.”
7
The water shutoff should be located in the base
cabinet on either side of the refrigerator or some
other easily accessible area. If the water shutoff valve
is not in the cabinets, the plumbing for the water line
can come through the floor. See “Water Supply
Requirements” for more information.
ELECTRICAL REQUIREMENTS
WARNING
B
Dimension
84" (213.4 cm)
to bottom of solid soffit
77"
(196 cm)
A
Width
(see chart following)
C Depth
MODEL
WIDTH A AS
SHOWN ABOVE
DIMENSION B AS
SHOWN ABOVE
42 42" (106.7 cm) 7¹⁄₂" (19.1 cm)
48 48" (121.9 cm) 13¹⁄₂" (34.3 cm)
INSTALLATION TYPE DEPTH C AS SHOWN ABOVE
Standard Flush
(new installation)
25" (63.5 cm) minimum
Retrofit Installations 24" (60.9 cm) minimum
NOTE : On retrofit installations, door panels will not be
flush with adjacent cabinets.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Before you move your refrigerator into its final location, it
is important to make sure you have the proper electrical
connection.
If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a similar
qualified person. Do not use a cord that shows cracks or
abrasion damage along its length or at either the plug or
connection end.
RECOMMENDED GROUNDING METHOD
A 115 V, 60 Hz., AC only, 15 A or 20 A fused, grounded
electrical supply is required. It is recommended that a
separate circuit serving only your refrigerator be provided.
Use an outlet that cannot be turned off by a switch. Do
not use an extension cord.
IMPORTANT : If this product is connected to a GFCI
(Ground Fault Circuit Interrupter) protected outlet,
nuisance tripping of the power supply may occur,
resulting in loss of cooling. Food quality and flavor may
be affected. If nuisance tripping has occurred, and if the
condition of the food appears poor, dispose of it.
NOTE : Before performing any type of installation or
cleaning, remove the top grille and turn the master power
switch to OFF or disconnect power at the circuit breaker
box.
When you are finished, turn ON the master power switch
or reconnect power at the circuit breaker box. Then reset
the control to the desired setting.
8
WATER SUPPLY REQUIREMENTS
IMPORTANT :
All installations must meet local plumbing code
requirements.
Connect to potable water supply only.
Do not use with water that is microbiologically unsafe or
of unknown quality without adequate disinfection before
or after the system. Systems certified for cyst reduction
may be used on disinfected waters that may contain
filterable cysts.
There is not enough clearance to achieve a flush
installation if a water shutoff valve is located in the
wall behind the refrigerator.
The water shutoff should be located in the base
cabinet on either side of the refrigerator or some
other easily accessible area. The water supply line,
however, must come up through the floor in the gray
shaded area shown.
REVERSE OSMOSIS WATER SUPPLY
IMPORTANT : The pressure of the water supply coming
out of a reverse osmosis system going to the water inlet
valve of the refrigerator needs to be between
30 psi and 120 psi (207 kPa and 827 kPa).
If a reverse osmosis water filtration system is connected
to your cold water supply, the water pressure to the
reverse osmosis system needs to be a minimum of
40 psi to 60 psi (276 kPa to 414 kPa).
If the water pressure to the reverse osmosis system is less
than 40 psi to 60 psi (276 kPa to 414 kPa):
Check to see whether the sediment filter in the
reverse osmosis system is blocked. Replace the filter if
necessary.
Allow the storage tank on the reverse osmosis system
to refill after heavy usage.
If your refrigerator has a water filter, it may further
reduce the water pressure when used in conjunction
with a reverse osmosis system. Remove the water
filter cartridge.
If you have questions about your water pressure, call a
licensed, qualified plumber.
6"
(15.2 cm)
6"
(15.2 cm)
1"
(2.54 cm)
6"
(15.2 cm)
A 1/2" (12.7 mm) hole for plumbing should be drilled
on the floor at least 6" (15.2 cm) from the right- or left-
hand side cabinet and should be no more than
1" (2.54 cm) away from the back wall. See “Connect
the Water Supply.”
The water supply connection is made at the front of
the refrigerator.
If additional tubing is needed, use copper tubing and
check for leaks. Install the copper tubing only in areas
where the household temperatures will remain above
freezing.
Do not use a piercing-type or 3/16" (4.76 mm) saddle
valve which reduces water flow and also clogs more
easily.
NOTE : Your refrigerator dealer has a kit available with
a 1/4" (6.35 mm) saddle-type shutoff valve, a union,
and copper tubing. Before purchasing, make sure a
saddle-type valve complies with your local plumbing
codes.
PRODUCT DIMENSIONS
IMPORTANT :
The depth from the front face of the doors to the
back of the refrigerator cabinet is 24" (60.96 cm)
without panels.
The power cord is 84" (213 cm) long.
The water supply connection is made at the bottom
front of the refrigerator.
TOP VIEW
A
24"
(61.0 cm)
MODEL A
42 41³⁄₄" (106 cm)
48 47³⁄₄" (121.3 cm)
WATER PRESSURE
A cold water supply with water pressure between
30 psi and 120 psi (207 kPa and 827 kPa) is required to
operate the water dispenser and ice maker. If you have
questions about your water pressure, call a licensed,
qualified plumber.
9
FRONT VIEW
Width dimensions were measured from hinge to
hinge.
When leveling legs are fully extended to 1¹⁄₄" (3.2 cm)
below rollers, add 1¹⁄₄" (3.2 cm) to the height
dimensions.
*83³⁄₈"
(211.8 cm)
DOOR SWING DIMENSIONS
The location must permit both doors to open to a
minimum of 90°. Allow 4¹⁄₂" (11.4 cm) minimum space
between the side of the refrigerator and a corner wall.
NOTE : More clearance may be required if you are using
wood overlay panels, custom handles, or extended
handles.
A CB D
90˚
110˚
MODEL A B C D
42
48
40³⁄₄"
(103.5 cm)
43¹⁄₄"
(109.9 cm)
39³⁄₄"
(101.0 cm)
42"
(106.7 cm)
90˚
110˚
45³⁄₈"
(115.3 cm)
48⁵⁄₈"
(123.5 cm)
46³⁄₄"
(118.8 cm)
50¹⁄₄"
(127.6 cm)
(see chart following)
A
MODEL WIDTH A HINGE EDGE TO HINGE EDGE
42 41³⁄₄" (106 cm)
48 47³⁄₄" (121.3 cm)
10
PERMISSIBLE INSTALLATION OPTIONS
OPTION 1OPEN TO CEILING
6" (15.24 cm)
min.
84"
(213.4 cm)
OPTION 3CLOSED SOFFIT
1/8" (3.2 mm) gap
1/8"
(3.2 mm) gap
84"
(213.4 cm)
1/8"
(3.2 mm) gap
OPTION 2FALSE FRONT CABINET FACE ONLY
6" (15.24 cm)
min.
84"
(213.4 cm)
STAINLESS STEEL PANEL KIT
INSTALLATION REQUIREMENTS
Refer instructions received with full height door panel kit.
CUSTOM WOOD PANEL DIMENSIONS
AND INSTALLATION REQUIREMENTS
Refer instructions received with Armoire kit.
11
Loading...