www.dexpress.com DIMENSION EXPRESS Fax on Demand (775) 833-3600
|
|
This Data Sheet Includes Information On |
|
|
|
|
|
|
|
|
|
|
|
|
|
Jenn-Air |
|
|
|
|
|
|
|
|
|
|
|
• |
Product Model Number (s): |
• |
|
|
|
|
|
|
|
||||
|
|
Hoods: |
|
|
|
|
|
|
|
|
|
|
|
|
|
UXT2036AAB, UXT2036AAW, UXT2036AAS and |
|
|
|
|
|
|
|
|
|
|
|
|
|
UXT2036AAQ |
|
|
|
|
|
|
|
|
|
|
|
|
• |
Dimensions (Actual Size) |
• |
|
|
|
|
|
|
|
|||
|
|
Width: |
36" |
|
|
|
|
|
|
|
|
|
|
|
|
Height : |
6" |
|
|
|
|
|
|
|
|
|
|
|
|
Top Depth: |
12" |
|
|
|
|
|
|
||||
|
|
|
|
|
|
12" |
|
|
|||||
|
|
Bottom Depth: |
17 1/2" |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
Dimension from back to center |
|
|
|
|
|
|
2" |
|
|||
|
|
line of top power supply hole: 2" |
|
|
|
|
|
|
|||||
|
|
Dimension from top to center line |
|
|
|
|
|
|
|
|
|
|
|
|
|
of back power supply hole: 3/4" |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6" |
|
|
|
|
|
|
|
Dimension from hood center line to |
|
|
|
|
3/4" |
|
|||||||
|
|
|
|
|
|
|
|
||||||
|
center line of power supply holes: 7 1/2" |
|
|
|
|
|
|
|
|
|
|
||
|
|
Dimension from back to |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
centerline of exhaust outlet: 5 3/4" |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
36" |
|
|
|
|
|||
|
• |
Additional Information |
• |
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
•Electrical Requirements: 120V, 60Hz, 2.2amps.
•For most efficient operation, the top of the hood should be 66" from the floor.
•Unit can be vented vertically by 6" round duct (or larger round duct).
•Vertical 6" round rating discharge is 190CFM.
View is looking at the Rear Top of the Unit (not to scale)
Knock-outs for wiring connection
Center Line
of Hood
5 3/4"
7 1/2"
17 1/2"
Subject to change without notice. This system is designed to |
|
|
|
be updated daily if necessary. Dimension Express is not |
|
|
|
responsible for use of superseded, voided, or outdated data |
|
|
|
sheets. Because of the difficulty or impracticability of deter- |
|
|
|
mining actual damages, liability of Dimension Express shall |
|
|
|
not exceed $50.00. |
|
|
|
Copyright © Dimension Express, 2002. |
217 |
|
|
|
|
|
|
• NEVER reuse Data Sheets. Data Sheets are subject to change without |
• Call Dimension Express if you have any questions at (775) 833-3633 • |
||
notice. Dimension Express is a FREE service bureau and is updated daily, |
• Always refer to a current Code at a Glance or manufacturer directory • |
||
it makes far more sense to spend the time necessary to request new Data |
• Data Sheet codes change on the first of odd numbered months at 12:01am • |
||
Sheets for each project, as opposed to the problems, time, costs, and risks |
BN110.05 • A217 • • 032603 • 95657 • 42385 |
||
associated with reusing old Data Sheets. |
|
|