Jenn-Air M169B, M169W Dimension Guide
www.dexpress.com DIMENSION EXPRESS Fax on Demand (775) 833-3600
This Data Sheet Includes Information On
Jenn-Air
• Product Model Number (s): •
Freestanding/Built-in Microwaves:
M169B and M169W
• Dimensions (Actual Size) •
Height including feet:
Unit width:
Depth:
15 3/4"
15 1/4"
22 3/8"
• Additional Information •
• Electrical requirements: Voltage 120, single phase,
60Hz. AC. 15 amp fuse ( 20 amp fuse recommended).
Ground circuit required. Locate outlet box in the
cabinet behind the microwave (flush mount is required
for cabinets less than 24" deep).
• For built-in applications the cabinet floor must be level
and capable of supporting 80 lbs.
• Approved for installation over Jenn-Air single wall
ovens.
• When installed over a Jenn-Air W131 30" single wall
oven, a minimum of 1 7/8" from the top of the wall oven
cutout to the bottom of the microwave cutout must be
maintained.
• M169B : Black.
• M169W : White.
Kits:
• MK30B (black) and MK30W (white) : Trim kit used
when installing over a Jenn-Air W30100 and W30400
wall ovens. See page 2 for cutout dimensions.
• MK27B (black) and MK27W (white) : Trim kit used
when installing over a Jenn-Air W27100, W27200 and
W27400 wall ovens. See page 2 for cutout dimensions.
• MK24B (black): Trim kit used when installing over a
Jenn-Air 24" wall oven. See page 3 for cutout
dimensions.
• MK24W (white): Trim kit used when installing over a
Jenn-Air 24" wall oven. See page 3 for cutout
dimensions.
22 3/8"
15 3/4"
(not to scale)
15 1/4"
See page 2-3 for additional information
Subject to change without notice. This system is designed to
be updated daily if necessary. Dimension Express is not
responsible for use of superseded, voided, or outdated data
sheets. Because of the difficulty or impracticability of determining actual damages, liability of Dimension Express shall
not exceed $50.00.
Copyright © Dimension Express, 2000.
• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at (775) 833-3633 •
notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.
132
BN230.11 • A132B315C116 • 31469 • 003006 • 122147 • 43129
www.dexpress.com
DIMENSION EXPRESS
Fax on Demand (775) 833-3600
Additional Information:
Page 2
(not to scale)
This Data Sheet Includes Information On
Jenn-Air
• Product Model Number (s): •
Freestanding/Built-in Microwaves:
M169B and M169W
M169B installed with Trim Kit MK30B
M169W installed with Trim Kit MK30W
17" min.
28 3/16"
Oven cutout or
cabint below
(Check oven
specifications for
oven cutout)
17" min.
25 1/2"
Oven cutout or
cabint below
(Check oven
specifications for
oven cutout)
16 1/16"
48"
recommended
distance to floor.
(not to scale)
16 1/16"
48"
recommended
distance to floor.
Minimum cabinet width: 33"
Cutout width: 28 3/16"
Cutout height: 16 1/16"
Minimum cabinet depth: 17"
Overall trim kit width: 29 3/4"
Overall trim kit height: 17"
Top overlap: 15/32"
Bottom overlap: 15/32"
Right overlap: 25/32"
Left overlap: 25/32"
M169B installed with Trim Kit MK27B
M169W installed with Trim Kit MK27W
Minimum cabinet width: 27"
Cutout width: 25 1/2"
Cutout height: 16 1/16"
Minimum cabinet depth: 17"
Overall trim kit width: 26 3/4"
Overall trim kit height: 17"
Top overlap: 15/32"
Bottom overlap: 15/32"
Right overlap: 5/8"
Left overlap: 5/8"
Subject to change without notice. This system is designed to be updated daily if necessary. Dimension Express is not responsible for use of superseded, voided, or
outdated data sheets. Because of the difficulty or impracticability of determining actual damages, liability of Dimension Express shall not exceed $50.00.
Copyright © Dimension Express, 2000.
• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at (775) 833-3633 •
notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.
BN230.11 • A132B315C116 • 31469 • 003006 • 122147 • 43129
315
Loading...