Jenn-Air JXT8030 User Manual

WALL MOUNT CHIMNEY HOOD

PRODUCT DIMENSIONS

D

E

F

G

B

H

J

INCHES CENTIMETERS

A 30 76 .2

B 22 55 .9

C 1 3/16 3. 0

D 28 15/16 - 46 5/8 73.5 - 118.4

E 21 5/8 54 .9

F 21 5/8 54 .9

G 5 5/16 13.5

H 10 7/16 26.5

J 10 7/16 26.5

MODEL SKUs

JXT8030

A

B

A

Style of product may vary from picture

NOTES:

Minimum mount height between range top to hood bottom should be no less than 24". Maximum mount height should be
no higher than 32". It is important to install the hood at the proper mounting height. Hoods mounted too low could result
in heat damage and fire hazard; while hoods mounted too high will be hard to reach and will lose performance and efficiency.

Electrical requirements: Adequately wired individual 120V A/C, 60Hz approved electrical circuit.
Use required fuse (15 amp) or comparable circuit breaker.

Important: Because of continuing product improvements, Jenn-Air® reserves the right to change specifications without notice. Dimensional specifications are provided for
planning purposes only. For complete details see installation instructions that accompany each product before selecting cabinetry, making cutouts or beginning installation.