Jenn-air JXL6536CSS Dimension Guide
JENN-AIR® DETAILED PLANNING DIMENSIONSJENN-AIR® DETAILED PLANNING DIMENSIONS
A
D
E
F
G
B
C
G
C
A
A
D
E
B
C
36" CUSTOM HOOD LINER
JXL6536CSS – 357⁄8" x 111⁄2" x 22"
PRODUCT DIMENSIONS
MODEL # JXL6536CSS
Width of upper portion of hood liner 275⁄8 70.1
E
D
B
C
FRONT VIEW
F
A
Overall width 357⁄8 91.1
B
Overall width with extension panel kit
36" to 42" extension panel kit*
C
36" to 48" extension panel kit**
Height from hood liner to hood
D
support
Overall height 111⁄2 29.2
E
Depth of upper portion of hood liner 123⁄8 31.4
F
Overall depth 22 55.9
G
Vent collar diameter 10 25.4
H
* Requires optional 36" to 42" extension panel kit – W10646268.
** Requires optional 36" to 48" extension panel kit – W10646269.
1 of 2
in cm
417⁄8
477⁄8
51⁄16 12.8
106.4
121.6
SIDE VIEW
TOP VIEW
G
H
B
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved. 8562EdZw815
JENN-AIR® DETAILED PLANNING DIMENSIONSJENN-AIR® DETAILED PLANNING DIMENSIONS
v
v
A
B
C
D
e
36" CUSTOM HOOD LINER
JXL6536CSS – 357⁄8" x 111⁄2" x 22"
OPENING/CLEARANCE DIMENSIONS
2 of 2
A
G
v
v
Centerline of
Hood Support
H
E
B
e
CUTOUT VIEW
F
C
D
ELECTRICAL REQUIREMENTS
120 volt, 60 Hz, AC only, 15-amp fused, electrical circuit is required.
VENTING REQUIREMENTS
FRONT VIEW
An internal or in-line (external) blower motor system is required.
The hood is factory set for venting through the roof or wall.
Do not terminate the vent in an attic or other enclosed area.
LOCATION REQUIREMENTS
Custom built enclosure with hood liner support. Hood support must be
able to support 75 lb (34.0 kg).
MODEL # JXL6536CSS
in cm
Width of vent entry location – ceiling option (min.-max.) 10 25.4
A
Width of vent entry location – wall option (min.-max.) 10 25.4
B
Width of cabinet opening – hood liner only (min.)
Width of cabinet opening – hood liner plus 36" to 42" extension panel kit* (min.)
C
Width of cabinet opening – hood liner plus 36" to 48" extension panel kit** (min.)
Suggested distance from hood to electric cooking surface (min.-max.) 24-36 61.0-91.4
D
Suggested distance from hood to gas cooking surface (min.-max.) 30-36 76.2-91.4
Distance from centerline to cutout for hood liner 14 35.5
E
Width of cutout for hood liner 28 71.1
F
Depth from cutout to wall 41⁄2 11.4
G
Depth of cutout for hood liner 13 33.0
H
e
Terminal box location
v
Recommended vent entry location
* Requires optional 36" to 42" extension panel kit – W10646268.
** Requires optional 36" to 48" extension panel kit – W10646269.
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved. 8562EdZw815
36
42
48
91.4
106.7
121.9
Loading...