JENN-AIR® DETAILED PLANNING DIMENSIONSJENN-AIR® DETAILED PLANNING DIMENSIONS
36" LOW PROFILE ISLAND-MOUNT PERIMETRIC CANOPY HOOD
JXI8936DS – 36" x 295⁄8-467⁄8" x 24"
PRODUCT DIMENSIONS
MODEL # JXI8936DS
Width of chimney 13 33.0
A
Width of hood 36 91.4
B
FRONT VIEW
F
A
B
E
D
C
Height of hood 15⁄8 4.2
C
Height of chimney 213⁄4 55.2
D
Overall height of chimney with extension
E
Overall height with vented installation (min.-max.)
F
Depth of chimney 111⁄4 28.6
G
Depth of hood 24 61.0
H
Vent collar diameter 6 15.2
I
Width from chimney to edge of hood 111⁄2 29.2
J
Depth from chimney to back edge of hood 63⁄8 16.2
K
in cm
28-
451⁄4
295⁄8-
467⁄8
1 of 2
71.0-
115.0
75.2-
119.1
SIDE VIEW
TOP VIEW
G
H
K
I
A
B
H
J
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide
before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8314AdZw111 4
JENN-AIR® DETAILED PLANNING DIMENSIONSJENN-AIR® DETAILED PLANNING DIMENSIONS
36" LOW PROFILE ISLAND-MOUNT PERIMETRIC CANOPY HOOD
JXI8936DS – 36" x 295⁄8-467⁄8" x 24"
OPENING/CLEARANCE DIMENSIONS
MODEL # JXI8936DS
Ceiling height — —
A
D
Suggested distance from hood to electric
cooking surface (min.-max.)
B
Suggested distance from hood to gas cooking
surface (min.-max.)
Countertop height — —
C
Height from bottom of hood to ceiling
D
(A – B – C = D)
in cm
24-36
30-36
— —
2 of 2
61.0-
91.4
76.2-
91.4
A
FRONT VIEW
B
ELECTRICAL REQUIREMENTS
120 volt, 60 Hz, AC only, 15-amp fused, electrical circuit is required.
VENTING REQUIREMENTS
The hood is factory set for venting through the roof. For non-vented (recirculating)
installation, refer to recirculation kit instructions for further information.
LOCATION REQUIREMENTS
Ceiling structure must be able to support 100 lb (45.4 kg).
For vented installation, the chimney can be adjusted for ceilings between 7' 6" (2.29 m)
and 10' (3.04 m).
For non-vented (recirculating) installation, the chimney can be adjusted for ceilings
between 7' 6" (2.29 m) and 10' (3.04 m).
C
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide
before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8314AdZw111 4