Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
You can be killed or seriously injured if you don't immediately
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
follow instructions.
You
can be killed or seriously injured if you don't
instructions.
follow
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
Plug into a grounded 3 prong outlet.
■
Do not remove ground prong.
■
Do not use an adapter.
■
Do not use an extension cord.
■
■ Disconnect power before servicing.
■ Replace all parts and panels before operating.
■ Remove doors from your old refrigerator.
■ Use non flammable cleaner.
■ Do not store or use petrol, flammable liquids or gas in the
vicinity of this or other electrical appliances. The fumes can
cause fires or explosions.
■ Do not store explosive substances such as aerosol cans with
a flammable propellant in this refrigerator.
■ Do not use or place electrical devices inside the refrigerator
compartments if they are not of the type expressly authorized
by the manufacture.
■ Use two or more people to move and install refrigerator.
To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:
■ This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
■ Children should be supervised to ensure that they do not
play with the appliance.
To avoid the risk of children becoming trapped and
■
suffocating, do not allow them to play or hide inside the
refrigerator.
■ If the power supply cord is damaged, it must be replaced by
the manufacturer or its service agent or a similarly qualified
person.
■ Keep ventilation openings, in the appliance enclosure or in
the built-in structure, clear of obstruction.
■ Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by
the manufacturer.
■ Do not damage the refrigerant circuit.
SAVE THESE INSTRUCTIONS
3
PROPER DISPOSAL OF YOUR
OLD REFRIGERATOR
WARNING
Suffocation Hazard
Remove doors from your old refrigerator.
Failure to do so can result in death or brain damage.
IMPORTANT: Child entrapment and suffocation are not
problems of the past. Junked or abandoned refrigerators
are still dangerous – even if they will sit for “just a few
days.” If you are getting rid of your old refrigerator, please
follow these instructions to help prevent accidents.
Before You Throw Away Your Old Refrigerator:
Take off the door. Leave the racks in place so that children may not
easily climb inside.
Important information to know about disposal of
refrigerants:
Dispose of refrigerator in accordance with Federal and Local
regulations. Refrigerants must be evacuated by a licensed,
EPA certified refrigerant technician in accordance with
established procedures.
FEATURES
12.
11.
10.
9.
1.
2.
3.
4.
5.
6,7,8.
1. Stealth Flush Design with
Smooth Close Door
Create an unbroken silhouette. Discreet 1/8" reveals
envelop every side, without exposed hinges or trim
pieces. Quiet, soft, secure. An articulating hinge
discreetly ushers the door open and gently pulls it
closed.
2. Daring Obsidian Interior
Inspired by volcanic glass, this dark finish erupts
with reflective, high-contrast style. Let the object of
your desire emerge like vibrant art, begging to be
consumed.
3. Glass Shelves
Gaze through platforms of glass wrapped in
unyielding shelf frames.
4. UV-Resistant Low-E Thermal Glass
Sustain what satiates. Double-paned glass helps filter
out ultraviolet light and rejects temperature swings
to reserve the finest tastes for your discerning palate.
5. LED Lighting
LED lights instinctively come alive, chasing away
shadows to reveal vivid details.
6. RISE™ Design Expression
Embrace an era of striking proportions. A stainless
steel suit of armor gleams with spectacular light. This
is strength—inextricable from beauty. Forged in the
fires of progress, the RISE™ design expression towers
over stagnant, uninspired designs that have inherited
undeserved standing.
7. NOIR™ Design Expression
Lose yourself in a world that’s yours alone. Crisp
silhouettes crackle with mystique; beguiling
reflections flow in and out of sight. Taut with
ceaseless allure and minimalist appeal, the NOIR™
design expression rejects dated ideals of beauty.
8. Custom Panel Overlay
Break free with custom panels that allow
unapologetic expression. Custom panels and handles
must be purchased separately.
9. Door Open Alarm
Helps protect food by giving an audio and visual alert
if the door is left open for 10 minutes.
10. Display Lighting Option
Features energy-efficient LED lights that provide
a clear view without excessive heat that can affect
internal temperatures.
11. Hushed Acoustics
Our internal compressor keeps your beverages
impeccably chilled, while running unobtrusively in
the background. Brilliance doesn’t have to announce
itself; it just is.
12. Emotive Controls
Hold sway over every zone. Let your light-guided
touch coax out the flavors of beverages, spirits and
beyond.
4
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Gather the required tools and parts before starting
installation
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or fire.
IMPORTANT: This appliances is intended to be used in
household and similar applications such as:
Staff kitchen areas in shops, office and other working
environments;
Farm houses and by clients in hotels, motels and
other residential type environments;
Bed and breakfast type environments; Catering and similar non-retail applications.
NOTES:
For the refrigerator to be flush with the front of the
base cabinets, remove any baseboards or moldings
from the rear of the opening. Refer “Product
Dimensions” and later in this section, “Opening
Dimensions.”
It is recommended that you do not install the
refrigerator near an oven, radiator, or other heat
source.
Do not install in a location where the temperature will
fall below 55°F (13°C). For best performance, do not
install the refrigerator behind a cabinet door or block
the base grille.
OPENING DIMENSIONS
Height dimensions are shown with the leveling legs
extended to the minimum height.
NOTE: When leveling legs are fully extended, add 5/8"
(15 mm) to the height dimensions. Refer “Product
Dimensions.”
If the floor of the opening is not level with the kitchen
floor, shim the opening to make it level with the
kitchen floor.
B
A
Opening and utility location dimensions
Opening width - A24" (60.96 cm) min.
Opening depth - B24" (60.96 cm) min.
Opening height - C34⁄" (87.6 cm) min.
35" (88.9 cm) max.
Dimension - D12⁄" (30.64 cm)
Dimension - E21⁄" (55.16 cm)
Dimension - F1⁄" (4.44 cm)
Dimension - G3" (7.55 cm)
Dimension - H4⁄" (11.37 cm)
Dimension - I9⁄" (23.47 cm)
For flush installation, the power outlet can be installed in
adjacent cabinetry with a cutout on the power cord side
for routing of the power cord.
The power outlet can also be recessed on the back
wall behind the unit as per recommended receptacle
locations in the above illustration.
5
PRODUCT DIMENSIONS
OVERALL PRODUCT
Width (up to hinge cover)23⁄" (60.72 cm)
Height (up to hinge cover)34⁄" (87.32 cm)
Glass door model (NOIR™) depth
(no handle)
Glass door model (RISE™) depth
(no handle)
Solid door models
(NOIR™/ RISE™)
Panel ready models depth
(with 3/4" panel and no handle)
Raw Door Height30⁄" (77.75 cm)
NOTE: The power cord is 60" (152.4 cm) long.
23⁄" (60.36 cm)
23⁄" (60 cm)
23⁄" (60 cm)
23⁄" (60.5 cm)
SOLID DOOR OVERLAY PANEL — PREPARATION
Create the custom overlay panel using the dimensions
shown in the illustration "Solid door overlay panel and
hinge routing dimensions". Rout shaded areas to a 1/2"
(12 mm) depth as shown.
IMPORTANT: The following graphic shows a custom
panel for a door with the hinges installed on the righthand side. If your refrigerator has the hinges installed on
the left-hand side, rotate the custom frame 180° so the
hinge markings will be on the left.
1/4"
(7 mm)
2"
1/8"
(3 mm)
4⁄"
(125 mm)
(53 mm)
23⁄"
(60.72 cm)
34⁄"
(87.32 cm)
Depth
(no handle)
30⁄"
(77.5 cm)
CUSTOM OVERLAY PANEL
NOTE: For standard stainless steel or glass door
models, skip these instructions and go to "Electrical
Requirements" section.
If you plan to install a custom overlay panel, you will
need to create the panel yourself or consult a qualified
cabinetmaker or carpenter. Refer dimension drawings for
panel specifications.
IMPORTANT:
The thickness of the overlay panel must be 3/4"
(19 mm).
Custom solid door overlay panel must not weigh
more than 20 lbs (9.07 kg).
Custom solid door overlay panel must not weigh
more than 10 lbs (4.54 kg).
Overlay panels weighing more than recommended
may cause damage to your appliance.
1/2"
(12 mm)
30⁄"
(77.75 cm)
Solid door overlay panel and hinge routing dimensions
23⁄"
(60.3 cm)
6
Loading...
+ 13 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.