Jenn-Air JUD248RCRS00 Owner's Manual

DOUBLE REFRIGERATOR DRAWERS

REFRIGERATOR/FREEZER DRAWERS

DOUBLE FREEZER DRAWERS

Installation Instruction and Use & Care Guide

For questions about features, operation/performance, parts, accessories, or service, call: 1-800-688-1100 or visit our website at...

www.jennair.com

In Canada, call: 1-800-807-6777, or visit our website at...

www.jennair.ca

CAJÓN REFRIGERADO DOBLE

CAJONES REFRIGERADOS/CONGELADOS

CAJONES CONGELADOS DOBLES

Instrucciones de instalación y Manual de uso y cuidado

Para consultas respecto a características, operación/desempeño, partes, accesorios o servicio, llame al: 1-800-688-1100

En Canadá, llame al: 1-800-807-6777 o visite nuestra página de internet...

o visite nuestra página de internet...

www.jennair.com

www.jennair.ca

DOUBLE TIROIR RÉFRIGÉRÉ

TIROIRS DE RÉFRIGÉRATION/CONGÉLATION

DOUBLE TIROIR DE CONGÉLATION

Guide d’utilisation et d’entretien

Au Canada, pour assistance, installation ou service, composez le 1-800-807-6777 ou visitez notre site web à...

www.jennair.ca

Table of Contents/Índice/Table des matières..................................................................2

W10130023B

TABLE OF CONTENTS

REFRIGERATOR DRAWERS SAFETY.......................................................3

Proper Disposal of Your Old Refrigerated Appliance ..............................3

DESIGN SPECIFICATIONS.........................................................................4

INSTALLATION REQUIREMENTS ............................................................. 5

Tools and Parts.........................................................................................5

Location Requirements.............................................................................5

Electrical Requirements............................................................................5

Water Supply Requirements.....................................................................6

Product Dimensions ................................................................................. 6

Custom Overlay Drawer Panels................................................................7

INSTALLATION INSTRUCTIONS ...............................................................7

Unpack the Refrigerator Drawers.............................................................7

Connect Water Supply..............................................................................8

Move the Refrigerator Drawers to Final Location .................................... 8

Level the Refrigerator Drawers................................................................. 9

Install Custom Overlay Panel....................................................................9

Complete Installation ................................................................................9

ÍNDICE

SEGURIDAD DE LOS CAJONES REFRIGERADOS ...............................18

Cómo deshacerse adecuadamente de su aparato refrigerado viejo ....18

ESPECIFICACIONES DE DISEÑO ...........................................................19

REQUISITOS DE INSTALACIÓN ..............................................................20

Piezas y herramientas.............................................................................20

Requisitos de ubicación .........................................................................20

Requisitos eléctricos...............................................................................21

Requisitos del suministro de agua .........................................................21

Medidas del producto.............................................................................21

Paneles de los cajones recubiertos a la medida....................................22

INSTRUCCIONES DE INSTALACIÓN ......................................................23

Cómo desempacar los cajones refrigerados .........................................23

Conexión del suministro de agua...........................................................23

Mueva los cajones refrigerados a su posición final ...............................24

Nivelación de los cajones refrigerados...................................................24

Cómo instalar el panel recubierto a la medida.......................................25

Complete la instalación ..........................................................................25

REFRIGERATOR DRAWERS USE ...........................................................10

Normal Sounds....................................................................................... 10

Ensuring Proper Air Circulation ..............................................................10

Using the Controls..................................................................................10

Ice Maker ................................................................................................ 11

Water Filtration System .......................................................................... 12

REFRIGERATOR DRAWERS CARE ........................................................12

Cleaning.................................................................................................. 12

Power Interruptions ................................................................................13

Vacation Care ......................................................................................... 13

TROUBLESHOOTING ............................................................................... 13

ASSISTANCE OR SERVICE...................................................................... 14

In the U.S.A............................................................................................. 14

In Canada................................................................................................ 15

Accessories............................................................................................. 15

WATER FILTER CERTIFICATIONS..........................................................15

PRODUCT DATA SHEETS........................................................................ 16

WARRANTY ...............................................................................................17

USO DE LOS CAJONES REFRIGERADOS ............................................. 26

Sonidos normales................................................................................... 26

Cómo asegurar la debida circulación de aire ........................................ 26

Uso de los controles...............................................................................26

Fábrica de hielo ......................................................................................28

Sistema de filtración de agua................................................................. 28

CUIDADO DE LOS CAJONES REFRIGERADOS.................................... 29

Limpieza..................................................................................................29

Cortes de corriente.................................................................................29

Cuidado durante las vacaciones............................................................ 29

SOLUCIÓN DE PROBLEMAS................................................................... 30

AYUDA O SERVICIO TÉCNICO................................................................ 31

En los EE.UU........................................................................................... 31

En Canadá .............................................................................................. 31

Accesorios .............................................................................................. 31

HOJA DE DATOS DEL PRODUCTO........................................................ 32

GARANTÍA ................................................................................................. 33

TABLE DES MATIÈRES

SÉCURITÉ DES TIROIRS RÉFRIGÉRÉS .................................................34

Mise au rebut correcte de votre vieil appareil réfrigéré..........................34

SPÉCIFICATIONS DE DESIGN.................................................................35

EXIGENCES D’INSTALLATION................................................................36

Outillage et pièces ..................................................................................36

Exigences d’emplacement .....................................................................36

Spécifications électriques.......................................................................36

Spécifications de l’alimentation en eau..................................................37

Dimensions du produit............................................................................37

Panneaux décoratifs de tiroirs personnalisés ........................................38

INSTRUCTIONS D’INSTALLATION .........................................................38

Déballage des tiroirs réfrigérés...............................................................38

Raccordement de l'alimentation en eau.................................................39

Déplacement des tiroirs réfrigérés à leur emplacement final................. 39

Réglage de l'aplomb des tiroirs réfrigérés .............................................40

Installation du panneau décoratif personnalisé......................................40

Achever l'installation...............................................................................41

UTILISATION DES TIROIRS RÉFRIGÉRÉS.............................................41

Sons normaux.........................................................................................41

Pour assurer une circulation d'air correcte ............................................41

Utilisation des commandes ....................................................................41

Machine à glaçons..................................................................................43

Système de filtration de l'eau................................................................. 43

ENTRETIEN DES TIROIRS RÉFRIGÉRÉS............................................... 44

Nettoyage ............................................................................................... 44

Pannes de courant.................................................................................. 44

Entretien avant les vacances..................................................................44

DÉPANNAGE .............................................................................................45

ASSISTANCE OU SERVICE......................................................................46

Aux États-Unis........................................................................................46

Au Canada .............................................................................................. 46

Accessoires............................................................................................. 46

FEUILLES DE DONNÉES SUR LE PRODUIT.......................................... 47

GARANTIE.................................................................................................. 48

REFRIGERATOR DRAWERS SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

You can be killed or seriously injured if you don't immediately

DANGER

WARNING

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

precautions:

■

Plug into a grounded 3 prong outlet.

■

Do not remove ground prong.

■

Do not use an adapter.

■

Do not use an extension cord.

■

Disconnect power before servicing.

■

Replace all parts and panels before operating.

To reduce the risk of fire, electric shock, or injury when using your refrigerator drawer(s), follow these basic

SAVE THESE INSTRUCTIONS

follow instructions.

can be killed or seriously injured if you don't

You instructions.

■

Remove door or drawer(s) from your old refrigerated

appliance.

■

Use nonflammable cleaner.

■

Keep flammable materials and vapors, such as gasoline, away from refrigerator drawer(s).

■

Use two or more people to move and install refrigerator drawer(s).

Proper Disposal of Your Old

Refrigerated Appliance

WARNING

Suffocation Hazard

Remove door or drawer(s) from your old refrigerated appliance.

Failure to do so can result in death or brain damage.

IMPORTANT: Child entrapment and suffocation are not problems of the past. A junked or abandoned refrigerated appliance is still dangerous – even if it will sit for “just a few days.” If you are getting rid of your old refrigerated appliance, please follow these instructions to help prevent accidents.

Before You Throw Away Your Old Refrigerated Appliance:

Remove the door or drawer(s).

DESIGN SPECIFICATIONS

24" Drawer Models

Double Refrigerator Drawers

Two refrigerator drawers provide additional storage options in the kitchen or other areas of the home.

Euro Series

JUD248R*R*

Overlay - Custom Panels and Handles Required

JUD248R*C*

Refrigerator/Freezer Drawers (with ice maker and water filter)

Upper refrigerator drawer and lower freezer drawer provide additional storage options in the kitchen or other areas of the home. Factory-installed ice maker in lower drawer ensures a constant supply of ice on hand at all times.

Euro Series

JUD248C*R*

Overlay - Custom Panels and Handles Required

JUD248C*C*

Double Freezer Drawers (with ice maker and water filter)

Two freezer drawers provide additional storage options in the kitchen or other areas of the home. Factory-installed ice maker in lower drawer ensures a constant supply of ice on hand at all times.

Euro Series

JUD248F*R*

Overlay - Custom Panels and Handles Required

JUD248F*C*

INSTALLATION REQUIREMENTS

Tools and Parts

TOOLS NEEDED:

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed

here.

■ Cordless drill

■ ¹⁄₈" Drill bit

Additional Tools Needed (Style 2 - Overlay only):

■ Scissors

■ Pencil

PARTS NEEDED (Style 2 - Overlay only):

■ Custom Overlay Drawer Panels —

See “Custom Overlay Drawer Panels.”

■ Hardware

PARTS SU PPLIED:

■ Hooks (8)

■ Overlay plates (4)

Location Requirements

■ Tape measure

■ Level

■ Phillips screwdriver

■ Scribe

■ Screws (16)

■ If the floor of the opening is not level with the kitchen floor,

shim the opening to make it level with the kitchen floor.

14³⁄₄"

(37.5 cm)

¹⁄₂"

(1.3 cm)

24" (60.96 cm) min.

Critical Dimensions:

³⁄₄

" (37.5 cm) utility opening

A. 14 B. 24" (60.96 cm) minimum opening width

34³⁄₈" (87.3 cm) min.

35" (88.9 cm) max.

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator drawer(s).

Failure to do so can result in death, explosion, or fire.

NOTES:

■ For the refrigerator drawers to be flush with the front of the

base cabinets remove any baseboards or moldings from the rear of the opening. See “Product Dimensions” and later in this section “Opening Dimensions (both styles).”

■ It is recommended that you do not install the refrigerator

drawers near an oven, radiator, or other heat source.

■ Do not install in a location where the temperature will fall

below 55°F (13°C).

Opening Dimensions (both styles)

■ Height dimensions are shown with the leveling legs extended

to the minimum height of ¹⁄₄" (6.35 mm) below the refrigerator drawers.

NOTE: When leveling legs are fully extended to 1" (25 mm) below the refrigerator drawers, add ³⁄₄" (19.05 mm) to the height dimensions. See “Product Dimensions.”

Electrical Requirements

WARNING

Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

Before you move your refrigerator drawers into the final location, it is important to make sure you have the proper electrical connection.

Recommended grounding method

A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator drawers be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

IMPORTANT: If this product is connected to a GFCI (Ground Fault Circuit Interrupter) equipped outlet, nuisance tripping of the power supply may occur, resulting in loss of cooling. Food quality and flavor may be affected. If nuisance tripping has occurred, and if the condition of the food appears poor, dispose of it.

Water Supply Requirements

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

IMPORTANT:

■ If you turn the refrigerator on before the water line is

connected, turn the ice maker OFF.

■ All installations must meet local plumbing code requirements.

■ Use copper tubing and check for leaks. Install copper tubing

only in areas where the household temperatures will remain above freezing.

TOOLS NEEDED: Flat-blade screwdriver, ⁷⁄₁₆" and ¹⁄₂" open-end wrenches or two adjustable wrenches, ¹⁄₄" nut driver and drill bit, cordless drill.

NOTE: Your refrigerator dealer has a kit available with a ¹⁄₄" (6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing-type or ³⁄₁₆" (4.76 mm) saddle valve which reduces water flow and clogs more easily.

Water Pressure

Style 1 - Euro Series

³⁄₈"

(1.0 cm)

Style 2 - Overlay

14⁷⁄₈"

(37.8 cm)

34¹⁄₈"

(86.7 cm)

14⁷⁄₈"

(37.8 cm)

A cold water supply with water pressure of between 30 and 120 psi (207 and 827 kPa) is required to operate ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of a

reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and 827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).

If the water pressure to the reverse osmosis system is less than 40 to 60 psi (276 to 414 kPa):

■ Check to see whether the sediment filter in the reverse

osmosis system is blocked. Replace the filter if necessary.

■ Allow the storage tank on the reverse osmosis system to refill

after heavy usage.

If you have questions about your water pressure, call a licensed, qualified plumber.

Product Dimensions

Styles 1 and 2 - Euro Series and Overlay

■ Height dimensions are shown with the leveling legs extended

to ¹⁄₄" (6.35 mm) below the refrigerator drawers.

■ When leveling legs are fully extended to 1" (25 mm) below the

refrigerator drawers, add ³⁄₄" (19.05 mm) to the height dimensions.

■ The power cord is 60" (152.4 cm) long.

³⁄₈"

(1.0 cm)

Drawer Opening Dimensions

Dimensions vary based on model, as shown.

Style 1 - Euro Series

21"

(53.3 cm)

18⁹⁄₁₆"

(47.2 cm)

22¹⁄₂"

(57.2 cm)

14⁷⁄₈"

(37.8 cm)

34¹⁄₈"

(86.7 cm)

14⁷⁄₈"

(37.8 cm)

Style 2 - Overlay

(43.8 cm)

17¹⁄₄"

22¹⁄₂"

(57.2 cm)

Custom Overlay Drawer Panels

If you plan to install custom wood panels, you will need to create the panels yourself or consult a qualified cabinetmaker or carpenter. See dimension drawings for panel specifications.

IMPORTANT:

■ The thickness of the overlay panels must be ³⁄₄" (19.05 mm).

■ To avoid damage to the drawers, each overlay panel must not

weigh more than 10 lbs (4.5 kg).

■ Do not exceed the height dimension for the overlay panels.

Panels that exceed the height dimension may damage the refrigerator drawers, cabinets or countertop.

■ The width of the overlay panels may vary according to the

width of the cabinet opening.

Top and Bottom Overlay Drawer Panel Dimensions

23⁵⁄₈"

¹⁵⁄₁₆" (2.4 cm)

(60.0 cm)

Drawer Width Dimensions

Style 1- Euro Series

24³⁄₄"

(60.4 cm)

27¹⁄₈"

(68.9 cm)

Style 2 - Overlay

23⁵⁄₈"

(60.0 cm)

23⁵⁄₈"

(60.0 cm)

23³⁄₄"

(60.4 cm)

4¹⁄₈" (10.5 cm)

¹³⁄₁₆"

(2.1 cm)

14⁷⁄₈"

(37.8 cm)

Pilot Holes

¹⁄₁₆" (1.6 mm) diameter x ³⁄₈" (9.5 mm) deep

8 places

¹³⁄₁₆"

(2.1 cm)

2³⁄₁₆" (5.6 cm)

Reverse Side

A. Overlay hook locations B. Route

¹⁄₈

" (3.18 mm) deep

¹⁄₁₆"

(1.6 mm)

min.

1³⁄₄"

(4.4 cm)

¹⁵⁄₁₆"

(2.4 cm)

INSTALLATION INSTRUCTIONS

Unpack the Refrigerator Drawers

23³⁄₄"

(60.4 cm)

22¹⁄₂"

(57.1 cm)

(61.2 cm)

24¹⁄₈"

WARNING

Excessive Weight Hazard

Use two or more people to move and install refrigerator drawer(s).

Failure to do so can result in back or other injury.

Remove the Packaging

Properly dispose of packaging. Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator drawers.

When Moving Your Refrigerator Drawers:

Your refrigerator drawers are heavy. When moving the appliance for service, be sure to cover the floor with cardboard or hardboard to avoid floor damage. Always pull the appliance straight out when moving it. Do not wiggle or “walk” the appliance when trying to move it, as floor damage could occur.

Clean Before Using

After you remove all of the package materials, clean the inside of your refrigerator drawers before using them. See the cleaning instructions in “Refrigerator Drawers Care.”

Connect Water Supply

(Refrigerator/Freezer Drawers and

Double Freezer Drawers only)

Connect to Water Line

1. Unplug refrigerator or disconnect power.

2. Turn OFF main water supply. Turn ON nearest faucet long

enough to clear line of water.

3. Locate a ½" to 1¹⁄₄" (1.25 cm to 3.18 cm) vertical cold water

pipe near the refrigerator.

IMPORTANT:

■ Make sure it is a cold water pipe.

■ Horizontal pipe will work, but drill on the top side of the

pipe, not the bottom. This will help keep water away from the drill and normal sediment from collecting in the valve.

4. Determine the length of copper tubing you need. Measure

from the connection on the lower left rear of refrigerator to the water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use ¹⁄₄" (6.35 mm) O.D. (outside diameter) copper tubing. Be sure both ends of copper tubing are cut square.

5. Using a cordless drill, drill a ¹⁄₄" hole in the cold water pipe you

have selected.

Connect to Refrigerator

1. Attach the copper tube to the valve inlet using a compression

nut and sleeve as shown. Tighten the compression nut. Do not overtighten. Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help avoid damage to the tubing when the refrigerator is pushed back against the wall.

2. Turn shutoff valve ON.

3. Check for leaks. Tighten any connections (including

connections at the valve) or nuts that leak.

A B

A. Plug B. Compression nut C. Pex tubing

4. The ice maker is equipped with a built-in water strainer. If your

water conditions require a second water strainer, install it in the ¹⁄₄" (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

5. Plug in refrigerator or reconnect power.

Move the Refrigerator Drawers to

Final Location

1. Place top of cardboard carton or plywood under the

appliance. Remove dolly.

2. Do not remove film or cover.

WARNING

DEF

A. Cold water pipe

B. Pipe clamp C. Copper tubing D. Compression nut

6. Fasten the shutoff valve to the cold water pipe with the pipe

clamp. Be sure the outlet end is solidly in the ¹⁄₄" drilled hole in the water pipe and that the washer is under the pipe clamp. Tighten the packing nut. Tighten the pipe clamp screws slowly and evenly so washer makes a watertight seal. Do not overtighten or you may crush the copper tubing.

7. Slip the compression sleeve and compression nut on the

copper tubing as shown. Insert the end of the tubing into the outlet end squarely as far as it will go. Screw compression nut onto outlet end with adjustable wrench. Do not overtighten.

8. Place the free end of the tubing in a container or sink, and turn

ON the main water supply. Flush the tubing until water is clear. Turn OFF the shutoff valve on the water pipe. Coil the copper tubing.

E. Compression sleeve F. Shutoff valve

G. Packing nut

Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

3. Plug into a grounded 3 prong outlet.

4. Move the refrigerator drawers straight back and evenly in front

of the opening.

Level the Refrigerator Drawers

IMPORTANT:

■ Overlay Model—Be sure to install the custom overlay drawer

panels before leveling the refrigerator drawers. See “Install Custom Overlay Drawer Panels.”

■ Before installing the refrigerator drawers, be sure that the

countertop is level.

■ If the countertop is not level, adjust the refrigerator drawers’

leveling legs until the appliance is square with the countertop. Be sure to maintain ³⁄₈" (9.5 mm) minimum gap between the top of the drawer and the countertop.

1. Open the top drawer and place the level across the top

drawer as shown. Check the level from left to right.

A. Check the level from left to right.

6. Be sure all four levelers are on the floor and supporting the full

weight of the refrigerator drawers.

Install Custom Overlay Panel

IMPORTANT:

■ Create a custom overlay panel according to the specifications

in “Custom Overlay Drawer Panels.”

■ Jenn-Air is not responsible for the removal or addition of

molding or decorative panels that would not allow access to the refrigerator for service.

Attach the Overlay Panel

NOTE: If the overlay hooks are not installed, see “Custom Overlay

Drawer Panels” for overlay hook locations.

1. Position the overlay panel ¹⁄₂" (1.27 cm) higher than the door.

Be sure to position the overlay hooks to the pilot holes.

2. Turn the leveling legs (front and back) until the top drawer

measures level from left to right.

3. Remove the level and close the top drawer. Check the gap

between the top of the drawer and the countertop. If the gap measures less than ³⁄₈" (9.5 mm) minimum, turn all four leveling bolts equally to the left to raise the leveling legs (this will lower the appliance). Recheck the level.

4. Open both drawers less than midway. Place the level on the

side flange beside the drawers as shown. Turn the front leveling bolts together in order to either raise or lower the appliance until the sides of the refrigerator drawers are plumb.

2. Insert the overlay hooks into the top of the holes in the door.

Push against the overlay panel to force the overlay hooks deeper into the door. Pull the overlay panel straight down to secure the overlay hooks to the door.

3. Using a Phillips screwdriver, attach the overlay plates to the

bottom of the overlay panel and door as shown.

ACDB

A. Overlay panel B. Door

C. Overlay plates (2) D. Round-head screws (8

A. Check the level from front to back.

5. Remove the level and close the drawers. Recheck the gap

between the top of the drawer and the countertop. If the gap measures less than ³⁄₈" (9.5 mm), turn all four leveling bolts equally to raise the leveling legs (this will lower the appliance). Recheck the level.

NOTE: Be sure to recheck the horizontal level of the top drawer.

Complete Installation

1. Remove all boxes, parts packages and packing materials from

the interior of the refrigerator drawers.

2. Remove the film.

3. Clean the refrigerator drawers before use.

4. The controls are preset at the factory to the recommended

settings. Be sure that the compressor is operating properly and that all the lights are working.

5. If construction will continue after the refrigerator drawers have

been installed, turn the power Off for both Drawers.

To get the most efficient use from your new refrigerator drawers, read the “Refrigerator Drawers Use” section.

REFRIGERATOR DRAWERS USE

WARNING

Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

Normal Sounds

Your new refrigerator drawers may make sounds that your old refrigerator drawers didn’t. Because the sounds are new to you, you might be concerned about them. Most of the new sounds are normal. Hard surfaces, such as the floor, walls, and cabinets, can make the sounds seem louder. The following describes the kinds of sounds and what may be making them.

■ Your refrigerator drawers are designed to run more efficiently

to keep your food items at the desired temperatures and to minimize energy usage. The high efficiency compressor and fans may cause your refrigerator drawers to run longer than your old ones. You may also hear a pulsating or high-pitched sound from the compressor or fans adjusting to optimize performance.

■ You may hear the evaporator fan motor circulating air through

the refrigerator drawers. The fan speed may increase as you open the drawers or add warm food.

■ As each cycle ends, you may hear a gurgling sound due to the

refrigerant flowing through the sealed system tubing.

■ Contraction and expansion of the inside walls may cause a

popping noise.

■ You may hear air being forced over the condenser by the

condenser fan.

■ You may hear water running into the drain pan during the Off

cycle.

Ensuring Proper Air Circulation

In order to ensure proper temperatures, you need to permit airflow inside the drawers.

Do not block any airflow vents. If the vents are blocked, airflow will be obstructed and temperature and moisture problems may occur.

IMPORTANT: To avoid odor transfer and drying out of food, wrap or cover foods tightly.

Using the Controls

The control panels for both refrigerator drawers are located in the upper drawer. To view and set the Upper and Lower control panel, pull out the upper drawer.

IMPORTANT:

■ Wait 24 hours after you turn on the refrigerator drawers before

you put food into the drawers. If you add food before the drawers have cooled completely, your food may spoil.

NOTE: Adjusting the controls to a lower (colder) setting in one or both drawers will not cool them any faster.

■ If the temperature is too warm or too cold in the drawers, first

check the air vents to be sure they are not blocked before adjusting the controls.

■ The preset settings should be correct for normal household

usage. The refrigerator control is set correctly when milk or juice is as cold as you like.

■ The freezer control is set correctly when ice cream is firm.

■ The actual temperature may differ from the display when a

drawer is open for an extended period of time.

Turning Drawers On/Off

■ Press and hold COOL ON/OFF for 3 seconds to turn on the

drawers. The indicator will light up.

■ Press and hold COOL ON/OFF for 3 seconds to turn off the

drawers.

Viewing Celsius Temperatures

■ Press the °C touch pad to change the temperature display

information from Fahrenheit to Celsius. The indicator will light up.

■ To redisplay degree Fahrenheit, press °C touch pad again.

Set to Recommended Temperatures

■ Press the SET touch pad to reset the set point to the factory

recommended temperature.

■ The recommended temperature for the refrigerator drawer is

37°F (3°C). The recommended temperature for the freezer drawer is 0°F (-18°C).

Adjusting Temperature Set Points

Style 1 - Double Refrigerator Drawers

The refrigerator control adjusts the temperature in both upper and lower drawers.

Style 2 - Refrigerator/Freezer Drawers

The refrigerator control adjusts the temperature in the upper drawer. The freezer control adjusts the temperature of the lower drawer.

Style 2 - Refrigerator/Freezer Drawers

Max Cool will reset the temperature for both drawers to the coldest setting 34°F (.5°C) in the refrigerator drawer and -5°F (-20.5°C) in the freezer drawer for 24-hours.

Style 3 - Double Freezer Drawers

Max Freeze will reset the temperatures for both drawers to the coldest setting -5°F (-20.5°C) for 24-hours.

NOTE: The temperature display will remain at the coldest setting(s) and the indicator light will remain on for a 24-hour period. The drawer will automatically return to the previous temperature set point(s) and the indicator light will turn off.

Sabbath Mode

Sabbath Mode is designed for the traveler or for those whose religious observances require turning off the lights. By selecting this feature, the temperature set points remain unchanged and the interior lights will turn off. For most efficient refrigerator drawers operation, it is recommended to exit the Sabbath Mode when it is no longer required.

■ Press and hold the SABBATH MODE touch pad for 3 seconds

to turn on the feature. The indicator will light up.

■ Press and hold the SABBATH MODE touch pad for 3 seconds

to turn off the feature.

Style 3 - Double Freezer Drawers

The freezer control adjusts the temperature in both upper and lower drawers.

IMPORTANT: Wait at least 24 hours between adjustments. Recheck the temperatures before other adjustments are made.

To adjust set point temperatures:

■ Press the refrigerator or freezer PLUS (+) or MINUS (-) touch

pad until the desired temperature setting is reached. NOTE: The set point range for the refrigerator drawer is 34°F

(1°C) to 45°F (7°C). The set point range for the freezer drawer is -5°F (-20.5°C) to 5°F (-15°C).

Max Cool or Max Freeze

Control Lock

The control panel can be locked to avoid unintentional temperature changes by small children or during cleaning.

■ Press and hold the CONTROL LOCK touch pad for 3 seconds

to turn on the feature. The indicator will light up.

■ To deactivate the feature, press and hold the CONTROL

LOCK touch pad for 3 seconds.

NOTE: When Control Lockout is activated, the control panel touch pads will not work. Any attempt to change the settings will result in a beep which indicates the control panel is locked.

Drawer Open/Alarm Reset

The Drawer Open alarm will sound and the Alarm Reset indicator will light up when a drawer has been open for longer than 10 minutes.

To temporarily disable the Drawer Open alarm, press and hold the ALARM RESET touch pad for 3 seconds. Closing the drawer will stop the audible alarm and reset the 10 minute timer.

The Max Cool or Max Freeze feature assists with periods of heavy usage, full grocery loads or temporarily warm room temperatures.

Style 1 - Double Refrigerator Drawers

Max Cool will reset the temperature for both drawers to the coldest setting 34°F (0.5°C) for a 24-hour period.

Ice Maker

(Refrigerator/Freezer Drawers and

Double Freezer Drawers only)

Turning the Ice Maker On/Off

IMPORTANT: Use the Ice On touch pad on the control panel to

turn the ice maker on or off. Do not adjust the wire arm located on the ice maker.

■ Press and hold the ICE ON/OFF touch pad for 3 seconds to

turn on the ice maker. The indicator will light up.

■ Press and hold the ICE ON/OFF touch pad for 3 seconds to

turn off the ice maker.

NOTE:

■ Allow 24 hours to produce the first batch of ice. Discard the

first three batches of ice produced.

■ The quality of your ice will only be as good as the quality of the

water supplied to your ice maker. Avoid connecting the ice maker to a softened water supply. Water softener chemicals (such as salt) can damage parts of the ice maker and lead to poor quality ice. If a softened water supply cannot be avoided, make sure the water softener is operating properly and is well maintained.

■ Do not store anything in the ice storage bin.

Water Filtration System

(Refrigerator/Freezer Drawers and Double Freezer

Drawers only)

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

IMPORTANT: Do not discard the cap. It is part of your refrigerator. Keep the cap to use with the replacement filter.

3. Take the new water filter out of its packaging and remove the

cover from O-rings.

4. Slide the filter cap onto the new cartridge. See illustration in

Step 2.

5. With filter cap in the vertical position, push the new filter into

the base grille until it stops. Rotate the cartridge cap clockwise to a horizontal position.

Using the Ice Maker Without the Water Filter

Water Filter Indicator / Reset Filter

The water filter indicator will help you know when to change your water filter. The indicator will change from dark to yellow when it is time to order a new filter. The indicator will then change from yellow to red when it is time to replace the water filter. The disposable water filter should be replaced at least every 6 months.

After replacing the water filter, reset the water filter indicator.

■ Press and hold the RESET FILTER touch pad for 3 seconds.

The indicator light will turn from red to dark.

Changing the Water Filter

The water filter is located through the base grille. You do not have to remove the base grille in order to change the water filter.

1. Locate the water filter cap in the front base grille. Rotate the

cap counterclockwise to a vertical position and pull the cap and water filter out through the base grille.

NOTE: There will be water in the filter. Some spilling may occur.

2. Remove the filter cap by sliding it off the end of the old filter.

The cap will slide to the left or right.

You can run the ice maker without a water filter. Your water will not be filtered.

1. Slide the filter cap off the end of the water filter. With the filter

cap in the horizontal position, insert the cap into the base grille until it stops.

IMPORTANT: Do not discard the cap. It is part of your refrigerator. Keep the cap to use with the replacement filter.

REFRIGERATOR DRAWERS

CARE

Cleaning

WARNING

Explosion Hazard Use nonflammable cleaner. Failure to do so can result in death, explosion, or fire.

The drawers defrost automatically. However, clean both drawers about once a month to avoid buildup of odors. Wipe up spills immediately.

To clean your refrigerator drawers:

1. Hand wash, rinse, and dry interior surfaces thoroughly. Use a

clean sponge or soft cloth and a mild detergent in warm water.

■ Do not use abrasive or harsh cleaners such as window

sprays, scouring cleansers, flammable fluids, cleaning waxes, concentrated detergents, bleaches or cleansers containing petroleum products on plastic parts, interior and drawer liners or gaskets. Do not use paper towels, scouring pads, or other harsh cleaning tools. These can scratch or damage materials.

■ To help remove odors, you can wash interior walls with a

mixture of warm water and baking soda (2 tbs to 1 qt [26 g to 0.95 L] of water).

2. Wash stainless steel and painted metal exteriors with a clean

sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners. Dry thoroughly with a soft cloth. To avoid damage to painted metal exteriors, apply appliance wax (or auto paste wax) with a clean, soft cloth. Do not wax plastic parts.

NOTE: To keep your Stainless Steel refrigerator drawers looking like new and to remove minor scuffs or marks, it is suggested that you use the manufacturer’s approved Stainless Steel Cleaner and Polish. To order the cleaner, see “Accessories.”

IMPORTANT: This cleaner is for Stainless Steel parts only! Do not allow the Stainless Steel Cleaner and Polish to come

into contact with any plastic parts such as the trim pieces or drawer gaskets. If unintended contact does occur, clean plastic part with a sponge and mild detergent in warm water. Dry thoroughly with a soft cloth.

Power Interruptions

If the power will be out for 24 hours or less, keep both refrigerator drawers closed to help food stay cold.

If the power will be out for more than 24 hours, do one of the following:

■ Place all perishable food in a food locker or cooler with dry

ice.

■ If neither a food locker or cooler is available, consume food if

still cold or throw away perishable food at once.

Vacation Care

Your refrigerator drawers are equipped with the Holiday Mode feature. By selecting this feature, the temperature set points remain unchanged and the interior lights will turn off. For most efficient refrigerator drawers operation, it is recommended to exit the Holiday Mode when it is no longer required.

If you choose to leave the refrigerator drawers on while you’re away:

1. Use up any perishables and freeze other items.

2. Press HOLIDAY MODE touch pad.

3. When you return from vacation, press HOLIDAY MODE touch

pad to return to normal operation.

If you choose to turn the refrigerator drawers off before you leave:

1. Remove all food from the refrigerator drawers.

2. Turn the Control Panel for the Upper and the Lower drawers to

Off. See “Using the Controls.”

3. Clean refrigerator drawers, wipe and dry them well.

4. Tape rubber or wood blocks to the tops of both drawers to

prop them open far enough for air to get in. This stops odor and mold from building up.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Your refrigerator drawers will not operate

WARNING

Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

■ Is the power supply cord unplugged? Plug into a grounded

3 prong outlet.

■ Has a household fuse blown, or a circuit breaker tripped?

Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

■ Are the refrigerator drawers control set in the Off

position? See “Using the Controls.”

■ Are the refrigerator drawers not cooling? Tur n the m o ff

then on again to reset. See “Using the Controls.” If this does not correct the problem, call for service.

The motor seems to run too much

■ Is the room temperature hotter than normal? The motor will

run longer under warm conditions. At normal room temperatures, expect your motor to run about 80% of the time. Under warmer conditions, it will run even more.

■ Has a large amount of food just been added to the

refrigerator drawers? Adding a large amount of food warms the refrigerator drawers. The motor normally will run longer to cool the refrigerator drawers back down.

■ Are the drawers opened often? The motor will run longer

when this occurs. Conserve energy by getting all items out at one time, keeping food organized, and closing the drawer as soon as possible.

■ Are the controls not set correctly for the surrounding

conditions? See “Using the Controls.”

■ Are the drawers not closed completely? Close the drawers

firmly. If they do not close completely, see “The drawers will not close completely” later in this section.

■ Are the drawer gaskets not sealed all the way around?

Contact a technician or other qualified person.

The refrigerator drawers seems to make too much noise

The sounds may be normal for your refrigerator drawers. See “Normal Sounds.”

The divider between the two compartments is warm

The warmth is probably due to normal operation of the automatic exterior moisture control. If still concerned, call for service.

■ Are the drawers opened often? Avoid humidity buildup by

getting all items out at one time, keeping food organized, and closing the drawer as soon as possible.

■ Is the room humid? It is normal for moisture to build up

inside the refrigerator drawers when the room air is humid.

■ Is the food packaged correctly? Check that all food is

securely wrapped. Dry damp food containers before placing in the refrigerator drawers.

■ Are the controls set correctly for the surrounding

conditions? See “Using the Controls.”

Temperature is too warm

■ Are the air vents blocked in either compartment? This

obstructs cold air movement between the compartments. Remove any objects from in front of the air vents. See “Ensuring Proper Air Circulation” for the location of air vents.

■ Are the drawers opened often? The refrigerator drawers will

warm when this occurs. Keep the refrigerator drawers cool by getting all items out at one time, keeping food organized, and closing the door as soon as possible.

■ Has a large amount of food just been added to the

refrigerator drawers? Adding a large amount of food warms the refrigerator drawers. It can take several hours for the refrigerator drawers to return to the normal temperature.

■ Are the controls set correctly for the surrounding

conditions? See “Using the Controls.”

■ Are the refrigerator drawers not cooling? Turn them off

then on again to reset. See “Using the Controls.” If this does not correct the problem, call for service.

There is interior moisture buildup

■ Are the air vents blocked in the refrigerator drawers?

Remove any objects from in front of the air vents. See “Ensuring Proper Air Circulation” for the location of air vents.

The drawers will not close completely

■ Are food packages blocking the drawer open? Rearrange

containers so that they fit more tightly and take up less space.

The drawers are difficult to open

WARNING

Explosion Hazard Use nonflammable cleaner. Failure to do so can result in death, explosion, or fire.

■ Are the gaskets dirty or sticky? Clean gaskets and the

surface that they touch. Rub a thin coat of paraffin wax on the gaskets following cleaning.

ASSISTANCE OR SERVICE

Before calling for assistance or service, please check “Troubleshooting.” It may save you the cost of a service call. If you still need help, follow the instructions below.

When calling, please know the purchase date and the complete model and serial number of your appliance. This information will help us to better respond to your request.

If you need replacement parts

If you need to order replacement parts, we recommend that you only use factory specified replacement parts. Factory specified replacement parts will fit right and work right because they are made with the same precision used to build every new Jenn-Air appliance.

To locate factory specified parts in your area, call us or your nearest designated service center.

In the U.S.A.

Call the Jenn-Air Customer eXperience Center toll free: 1-800-688-1100.

Our consultants provide assistance with:

■ Features and specifications on our full line of appliances.

■ Installation information.

■ Use and maintenance procedures.

■ Accessory and repair parts sales.

■ Specialized customer assistance (Spanish speaking, hearing

impaired, limited vision, etc.).

■ Referrals to local dealers, repair parts distributors, and service

companies. Jenn-Air designated service technicians are trained to fulfill the product warranty and provide afterwarranty service, anywhere in the United States.

To locate the Jenn-Air designated service company in your area, you can also look in your telephone directory Yellow Pages.

For further assistance

If you need further assistance, you can write to Jenn-Air with any questions or concerns at:

Jenn-Air Brand Home Appliances Customer eXperience Center 553 Benson Road Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

In Canada

Call the Jenn-Air Canada Customer eXperience Centre toll free:

1-800-807-6777. Our consultants provide assistance with:

■ Features and specifications on our full line of appliances.

■ Use and maintenance procedures.

■ Accessory and repair parts sales.

■ Referrals to local dealers, repair parts distributors, and

services companies. Jenn-Air Canada designated service technicians are trained to fulfill the product warranty and provide after-warranty service, anywhere in Canada.

For further assistance

If you need further assistance, you can write to Jenn-Air Canada with any questions or concerns at:

Jenn-Air Brand Home Appliances Customer eXperience Centre 1901 Minnesota Court Mississauga, Ontario L5N 3A7

Please include a daytime phone number in your correspondence.

Accessories

To order accessories, call 1-800-442-9991 and ask for the appropriate part number listed below or contact your authorized Jenn-Air dealer. In Canada, call 1-800-807-6777.

Base Grille Water Filter

NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Replacement filter

Order Part #4396702 (L200V / NL120V)

WATER FILTER

CERTIFICATIONS

+ 33 hidden pages