Jenn-Air JS42NXFXDW00 Installation Guide

JENN-AIR_SIDEBYSIDEBUILT-INREFRIGERATOR

REFRIGERADOREMPOTRADO

DEDOSPUERTASJENN-AII_

RI_FRIGI_RA'IEURENCASTRI_CO'IE.A.CO'IEJENN-AII_

INSTALLATIONGUIDE

For questions about features, operation/performance, parts, accessories, or service, call:

1-800-JENNAIR (1-800-536-6247) or visit our website at www.jennair.com.

In Canada, call: 1-800-807-6777, or visit our website at www.jennair.ca.

MANUAL DEINSTALACION

Si tiene preguntas respecto alas caracteristicas, funcionamiento, rendimiento, partes, accesorios o servicio tecnico, Ilame al:

1-800-JENNAIR (1-800-536-6247) o visite nuestro sitio de internet: www.jennair.com.

En CanadA, Ilame al: 1-800-807-6777, o visite nuestro sitio de internet: www.jennair.ca.

GUIDED'INSTALLATION

Au Canada, pour assistance, installation ou service, composez le 1-800-807-6777 ou visitez notre site web &www.jennair.ca.

Table of Contents/[ndice/Table des matieres ...................................................................................... 2

_°JENN-AIRo

W10231368A

TABLEOF CONTENTS

REFRIGERATOR SAFETY ........................................................................... 3

MODELS ....................................................................................................... 4

Pro-Style ®and Euro-Style Door Handle Kits ............................................ 4

INSTALLATION REQUIREMENTS ............................................................. 5

Tools and Parts ......................................................................................... 5

Location Requirements ............................................................................. 5

Electrical Requirements ............................................................................ 6

Water Supply Requirements ..................................................................... 7

Product Dimensions ................................................................................. 7

Tipping Radius .......................................................................................... 8

Door Swing Dimensions ........................................................................... 8

Cabinet and Panel Installation Options .................................................... 8

Fully Integrated Installation Requirements ............................................... 9

Custom Overlay Panels .......................................................................... 10

Overlay Panel Dimensions ...................................................................... 10

[NDICE

INSTALLATION INSTRUCTIONS ............................................................. 11

Unpack the Refrigerator ......................................................................... 11

Move the Refrigerator into House .......................................................... 11

Install Anti-Tip Boards ............................................................................ 11

Connect the Water Supply ..................................................................... 12

Plug in Refrigerator ................................................................................. 13

Move Refrigerator to Final Location ....................................................... 14

Level and Align Refrigerator ................................................................... 14

Install Refrigerator and Overlay Panels .................................................. 15

Install Handles ........................................................................................ 19

Install Base Grille .................................................................................... 19

Complete Installation .............................................................................. 20

Water System Preparation ..................................................................... 20

SEGURIDAD DEL REFRIGERADOR ........................................................ 21

MODELOS .................................................................................................. 22

Juegos de manijas para puertas Euro-Style y Pro-Style ®...................... 22

REQUlSlTOS DE INSTALAClON .............................................................. 23

Piezas y herramientas ............................................................................. 23

Requisitos de ubicaci6n ......................................................................... 23

Requisitos electricos ............................................................................... 24

Requisitos del suministro de agua ......................................................... 25

Medidas del producto ............................................................................. 25

Arco de vuelco ........................................................................................ 26

Medidas de oscilaci6n de las puertas .................................................... 26

Opciones para la instalaci6n del armario y los paneles ......................... 27

Requisitos para la instalaci6n completamente incorporada .................. 27

Paneles recubiertos a la medida ............................................................ 28

Dimensiones del panel recubierto .......................................................... 29

TABLEDESMATIERES

SleCURITle DU RleFRIGleRATEUR ........................................................... 40

MOD#LES .................................................................................................. 41

Ensembles de poignees de porte Pro-Style ®et Euro-Style ................... 41

EXlGENCES D'INSTALLATION ................................................................ 42

Outillage et pieces .................................................................................. 42

Exigences d'emplacement ..................................................................... 42

Specifications 61ectriques ...................................................................... 43

Specifications de I'alimentation en eau .................................................. 44

Dimensions du produit ............................................................................ 44

Rayon de basculement ........................................................................... 45

Dimensions pour le pivotement des portes ........................................... 45

Options d'installation du placard et du panneau ................................... 46

Exigences d'une installation int6gree ..................................................... 46

Panneaux decoratifs sur mesure ............................................................ 47

Dimensions des panneaux decoratifs .................................................... 48

INSTRUCClONES DE INSTALAClON ...................................................... 29

Desempaque el refrigerador ................................................................... 29

C6mo hacer entrar el refrigerador en la casa ........................................ 30

C6mo instalar los tableros antivuelco .................................................... 30

Conexi6n del suministro de agua ........................................................... 31

C6mo enchufar el refrigerador ............................................................... 32

C6mo mover el refrigerador a su ubicaci6n final ................................... 33

Nivelaci6n y alineamiento del refrigerador ............................................. 33

Instalaci6n del refrigerador y los paneles recubiertos ........................... 34

Instalaci6n de las manijas ....................................................................... 38

Instalaci6n de la rejilla de la base ........................................................... 38

C6mo terminar la instalaci6n .................................................................. 39

Preparaci6n del sistema de agua ........................................................... 39

INSTRUCTIONS D'INSTALLATION ......................................................... 48

Deballage du refrig_rateur ...................................................................... 48

Faire entrer le refrig_rateur dans le domicile .......................................... 49

Installation de planches antibasculement .............................................. 49

Raccordement & I'alimentation en eau ................................................... 50

Brancher le r6frig6rateur ......................................................................... 51

Deplacement du r6frig_rateur &son emplacement definitif ................... 52

R_glage de I'aplomb et alignement du r6frig_rateur .............................. 52

Installation du refrig6rateur et des panneaux decoratifs ....................... 53

Installation des poignees ........................................................................ 58

Installation de la grille de la base ........................................................... 58

Achever I'installation ............................................................................... 59

Preparation du syst_me d'eau ............................................................... 59

REFRIGERATORSAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

Tip Over Hazard

Refrigerator is top heavy and tips easily when not completely installed.

Keep doors taped closed until refrigerator is completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

MODELS

Integrated Design Features custom-made panels and custom hardware provided by

the cabinetmaker for a seamless appearance designed to blend with existing kitchen cabinetw.

Base Model Numbers: JS42NXFXDW, J48NXFXDW

Pro-Style s Stainless Design Features stainless steel wrapped doors and Pro-Style shandles

with diamond-etched grip. Base Model Numbers: JS42NXFXDW, J48NXFXDW

Kit Model Numbers: JPK42SNXWPS, JPK48SNXWPS

Eure-Style Stainless Design Features stainless steel wrapped doors and new Euro-style

handles designed to compliment the Jenn-Air Euro kitchen suite or enhance any kitchen decor.

Base Model Numbers: JS42NXFXDW, J48NXFXDW Kit Model Number: JPK42SNXWES, JPK48SNXWES

These handle kits can be ordered to use on custom wood overlay panels.

All factory parts are available through your Jenn-Air dealer or by calling Jenn-Air at 1-800-JENNAIR (1-800-536-6247). In Canada,

call 1-800-807-6777.

Follow the kit instructions for installing the door handles.

Pro-Style s Stainless Steel - W10250643 Euro-Style Stainless Steel - W10250637

INSTALLATIONREQUIREMENTS

IMPORTANT:

• Installer: Leave Installation Instructions with the homeowner.

• Homeowner: Keep Installation Instructions for future reference. Save these Installation Instructions for the local

electrical inspector's use.

TOOLS NEEDED: Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed here.

• Cordless drill

• Drill bits

• Two adjustable wrenches

• Phillips screwdriver

• Small level

• Appliance dolly

• 3/32" Allen wrench

(panel kits only)

PARTS NEEDED:

• Six #8 x 3" (7.6 cm) wood screws (longer screws may be needed)

• One or two 2" x 4" x 32" (5cm x 10 cm x 81 cm) wood board(s)

• Integrated design - consult a qualified cabinetmaker or carpenter to make the custom wood panels. See "Integrated Series Custom Overlay Panels" for more information.

Stainless Steel design - the panel kit is shipped with the refrigerator.

• Flexible, codes approved water supply tubing, a ferrule, a union and a 1/4"(6.35 mm) compression fitting.

• 1%2" nut driver

• 3/8"and 1/2"open-end wrenches

• 5/32"and 3/le"Allen wrench

• 1/4"and _e" socket drivers

• Tape measure

• Utility knife

• Tape (painters)

_' '= _= I ...... ,= , ,+>,= , ,i_<

E×plosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

IMPORTANT:

• Observe all governing codes and ordinances.

• It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source.

• Do not install in a location where the temperature will fall below 55°F (13°C).

• Floor must support the refrigerator weight, more than 600 Ibs (272 kg), door panels and contents of the refrigerator.

• Ceiling height must allow for side tipping radius. See "Tipping Radius."

• Location should permit door to open fully. See "Door Swing Dimensions."

• Location must permit top grille removal. See "Opening Dimensions."

Opening Dimensions

• A solid soffit or wall cabinet must be installed 84" (213.4 cm) above the floor. If the solid soffit is higher than 84" (213.4 cm)

or one is not available, then the refrigerator must be braced. If the anti-tip boards are needed, they must be attached to the

rear wall studs so that there is 84" (213.4 cm) from the bottom of the anti-tip board to the floor. See "Install Anti-Tip Boards"

for more information. For a fully integrated installation, a minimum of 6" (15.24 cm)

of open space above the refrigerator is required. See "Fully Integrated Installation." Anti-tip boards are required. See

"Install Anti-Tip Boards" for more information. The width of the opening, from side to side, must be as

specified for your model, for at least 2" (5.08 cm) back from the face of the cabinet. If your opening does not meet this

requirement, you will need to make modifications. A grounded 3 prong electrical outlet should be placed within

4" (10.2 cm) of the right side cabinets or end panel. See "Electrical Requirements" for more information.

Thewatershutoffshouldbelocatedinthebasecabineton eithersideoftherefrigeratororsomeothereasilyaccessible

area.Ifthewatershutoffvalveisnotinthecabinets,the plumbingforthewaterlinecancomethroughthefloor.See

"WaterSupplyRequirements"formoreinformation.

(10

4" (213.4 cm)

to bottom of solid soffit

77"

(196 cm)

Width

(see chart following)

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded

electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an

extension cord. IMPORTANT: Ifthis product is connected to a GFCI (Ground Fault

Circuit Interrupter) protected outlet, nuisance tripping of the power supply may occur, resulting in loss of cooling. Food quality

and flavor may be affected. If nuisance tripping has occurred, and if the condition of the food appears poor, dispose of it.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, remove the top grille and turn the master

power switch to OFF or disconnect power at the circuit breaker box.

When you are finished, turn ON the master power switch or reconnect power at the circuit breaker box. Then reset the control

to the desired setting.

Model Width A (as shown above)

42 42" (106.7 cm) 48 48" (121.9 cm)

Installation Type Depth B (as shown above)

Standard Flush 25" (63.5 cm) minimum (new installation)

Retrofit Installations 24" (60.9 cm) minimum

IMPORTANT:

Flooring under refrigerator must be at same level as the room. Face of cabinetry must be plumb.

The width of the opening (Width A), must be as specified for your model, for at least 2" (5.08 cm) back from the face of the cabinet. If your opening does not meet this requirement, you will need to make modifications.

• p y

All installations must meet local plumbing code requirements. The water supply line must come up through the floor in the

gray shaded area shown. The water shutoff should be located inthe base cabinet on

either side of the refrigerator or some other easily accessible area. The right-hand side is recommended.

NOTE: There is not enough clearance to achieve a flush installation if a water shutoff valve is located in the wall behind

the refrigerator.

(15.2 cm)

(2.54 cm)

A 1/2"(12.7 mm) hole for plumbing should be drilled at least 6" (15.2 cm) from the right or left hand side cabinet or panel. On

the floor, the hole should be no more than 1" (2.54 cm) away from the back wall. See "Connect the Water Supply."

If additional tubing is needed, use copper tubing and check for leaks. Install the copper tubing only in areas where the

household temperatures will remain above freezing. Do not use a piercing-type or ¾e" (4.76 mm) saddle valve

which reduces water flow and clogs more easily. NOTE: Your refrigerator dealer has a kit available with a 1/4"

(6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes.

}duc D mens o ss

IM PORTANT:

• The depth from the front face of the doors to the back of the refrigerator cabinet is 24" (60.96 cm) without panels.

• The power cord is 84" (213 cm) long.

• The water supply line is located at the front of the refrigerator.

TopView

,_ A ID

24"

(61.0 cm)

Model A

42 413/4"(106 cm)

48 473/4'' (121.3 cm)

Front View

• Width dimensions were measured from hinge to hinge.

Water Pressure

A cold water supply with water pressure between 30 and 120 psi (207 and 827 kPa) is required to operate the water dispenser and ice maker. Ifyou have questions about your water pressure, call a

licensed, qualified plumber. Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi

(207 and 827 kPa). If a reverse osmosis water filtration system is connected to your

cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).

If the water pressure to the reverse osmosis system is less than 40 to 60 psi (276 to 414 kPa):

• Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

• Allow the storage tank on the reverse osmosis system to refill after heavy usage.

• If your refrigerator has a water filter, it may further reduce the water pressure when used in conjunction with a reverse

osmosis system. Remove the water filter cartridge.

If you have questions about your water pressure, call a licensed, qualified plumber.

Model 42 48

"84" (213.4 cm)

(seechart following)

Width A (hinge edge to hinge edge)

413/4"(106 cm) 473/4'' (121.3 cm)

Besurethereisadequateceilingheighttostandtherefrigerator uprightwhenit ismovedintoplace.

• Thedollywheelheightmustbeaddedtothetippingradius whenadollyisused.

• Ifneeded,thetippingradiuscanbereduced.See"Reduce TippingRadius."

Side Tipping Radius

The side tipping radius varies depending upon the width of the model. Use the chart provided to determine the side tipping

radius. NOTE: Tip on side only.

/_JJ [

ii ii

Model Tipping Radius A

Cabinet Depth - 25" (63.5 cm)

Framed Cabinetry

TopView - Overlay

A. Refrigerator door

B. Overlay panel

C. Side trim

Top View - Inset

D.Adjacent cabinet

E.Grille bracket

42 913/8"(232.1 cm) 48 943/8"(239.7 cm)

Thelocation must permit both doors to open to a minimum of 9O°. Allow 4V2"(11.4 cm) minimum space between the side of the refrigerator and a corner wall.

NOTE: More clearance may berequired ifyou are using overlay panels, custom handles, or extended handles.

A B C D

P ttt,

9o°/ \ \ ,,

_._/ 110 ° \ \. i! i

-"/" / \ \90° !ii _'_\

:110_-"_""_ "_'i ii \\\

Model A B C D

42 403/4" 393/4" 453/8" 463/4"

(103.5cm) (101.0cm) (115.3cm) (118.8cm)

48 43V4" 42" 48%" 50V4"

(109.9 cm) (106.7 cm) (123.5 cm) (127.6 cm)

A B

A. Refrigerator door B. Overlay panel

C. Side trim

Frameless Cabinetry

A. Refrigerator door B. Overlay panel

C. Side trim

D. Adjacent cabinet

E. Grille bracket

D. Adjacent cabinet E. Grille bracket

CabinetDepth- 24" (60.9 cm)

Framed Cabinetry TopView

A. Refrigerator door B. Overlay panel

C. Side trim

D.Adjacent cabinet E.Grifle bracket

Fully Integrated Installation - Side View

.....i....................O

A.False front (optional) C.Full height grille B.Airflow D.Door panel

Frameless Cabinetry TopView

A B

A. Refrigerator door

B. Overlay panel C. Side trim

The refrigerator can be installed fully integrated if the adjacent cabinetry meets the airflow venting requirements critical to

refrigerator performance.

IMPORTANT:

• Both Standard and Fully Integrated installations can be achieved with either a 24" (60.9 cm) or 25" (63.5 cm) deep

opening.

• A full height grille is used to achieve a fully integrated installation. Use the integrated bracket (provided) to attach the full height grille.

NOTE: A top grille filler is not required with a full height grille.

Integrated Grille Bracket

D. Adjacent Cabinet

E. Grille bracket

Airflow Venting Requirements

Fully integrated installations require a minimum of 6" (15.24 cm) of open space above the refrigerator. This space must not be

blocked in any way, including soffits.

Option I - Open to Ceiling

6" (15.24 cm)

min.

Option 2 - False Front (cabinet face only)

E 1lIE

6" (15.24 cm) min.

Door Panels

741/4"

(188.6 cm)

Freezer

Door Panel

Refrigerator

Door Panel

Custom overlay panels allow you to blend the exterior of your refrigerator into the overall kitchen decor, and to use custom

handles for additional design flexibility. In some cases, your cabinet manufacturer may choose to work

with one panel routed for the different dimensions. Follow these panel dimension and placement instructions to be sure that the custom overlay panels will fit properly.

IM PORTANT:

• The weight of the refrigerator door overlay panel cannot exceed 66 Ibs (29.9 kg) for 48" models or 65 Ibs (29.5 kg) for

42" models.

• The weight of the freezer door overlay panel cannot exceed 50 Ibs (23 kg) for 48" models or 49 Ibs (22.2 kg) for 42"

models.

• The weight of the top grille overlay panel cannot exceed 8 Ibs (3.6 kg) for 48" models or 7 Ibs (3.2 kg) for 42" models.

• The required thickness for all panels is 3/4"(1.91 cm).

• This installation does not require filler or backer panels.

r!_o_-*llJ i [t] _i

Pinch Hazard

Installation of door panels with less than a 3/8"(0.95 cm) gap between the door panel and the adjacent cabinet increases the risk of potential pinching.

Model 42 48

Reveal %" 1/8" %" 1/8" A 17%e" 171¾d' 201/le'' 20¾d'

(44.61 cm) (45.24 cm) (50.96 cm) (50.17 cm)

B 23%d' 231¾e'' 27Vld' 27¾d'

(59.85 cm) (60.48 cm) (68.74 cm) (69.37 cm)

Grille Panel

Integrated Installation - Full Height Grille

_ c _l

(16.83cm) TopGrillePanel

°'II I

Model 42 48 Reveal %" %" %" 1/8" C 41V4" 413/4" 47V4" 473/4"

(104.76 cm) (106.05 cm) (104.76 cm) (121.29 cm)

StandardInstallation- Flush Grille

5s/4'' +

Model 42 48 Reveal %" 1/8" %" 1/8" D 411/4" 41%" 471/4'' 47%"

(104.76cm) (106.05cm) (104.76cm) (121.29cm)

E 411/4" 41%" 471/4'' 47%"

(104.76cm) (106.05cm) (104.76cm) (121.29cm)

IMPORTANT: The grille panel height, shown in the Standard Installation Flush Grille graphic, allows for an air gap critical to refrigerator performance.

Tip Over Hazard

Refrigerator is top heavy and tips easily when not

completely installed.

Keep doors taped closed until refrigerator is

completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

INSTALLATIONINSTRUCTIONS

<Be ge Csot

Tip Over Hazard

Refrigerator is top heavy and tips easily when not

completely installed.

Keep doors taped closed until refrigerator is

completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

IM PORTANT:

• Do not remove the film covering until the refrigerator is in its operating location.

All four leveling legs must contact the floor to support and stabilize the full weight of the refrigerator.

Keep the cardboard shipping piece or plywood under the refrigerator until it is installed in the operating location.

Remove and save the literature package bag taped to the side of the refrigerator and the parts bag behind the grille. Remove the four brackets (two on each side) that attach the shipping

base to the refrigerator bottom. NOTE: Do not remove tape and door bracing until the

refrigerator is in its final location.

If necessary, reduce the tipping radius. See "Tipping Radius" for ceiling height requirements.

Place an appliance dolly under the left side of the refrigerator as shown. Place the corner posts from the packing materials over the trims as appropriate. Slowly tighten the strap.

f nn nn

2. Place pieces of the shipping carton on the floor when rolling the dolly and refrigerator into the house. Move the refrigerator

close to the built-in opening.

3. Place top of cardboard carton or plywood under refrigerator.

4. Stand the refrigerator up. First, place the left bottom edge of the refrigerator on the floor, stand the refrigerator upright and

then lower the right-hand side of the refrigerator to the floor.

5. Reassemble the trim and top grille after the dolly has been removed from the refrigerator.

)f"sSl'c_))A s,,,_. Boc_I_Cs

.......... b

IM PORTANT:

• If a solid soffit is not available, an anti-tip board must be installed.

It is recommended that board(s) be installed before the refrigerator is installed.

Board(s) must be long enough to fully cover the width of the compressor cover.

Locate the board(s) so the bottom surface(s) of the board(s) is(are) 84" (213 cm) from the floor.

During installation, raise the refrigerator up so there is 1/4"(6.35 mm) maximum between the top of the refrigerator and the bottom of the anti-tip board(s). Do not crush the

compressor cover when raising the rear leveling legs.

To Install Anti-tip Boards

1. Mark the stud locations on rear wall 80" to 90" (203 cm to 229 cm) above floor.

2. Securely attach one or two 2" x 4" x 32" (5 cm x 10 cm x 81 cm) boards to wall studs behind refrigerator. Use six #8 x 3" (7.6 cm) (or longer) wood screws. The wood screws must be screwed into the studs at least 11/2"(3.8 cm). The

board(s) must overlap the compressor cover.

A B

2. Connect the flexible, codes approved water supply line to the water shutoff valve by threading the provided nut onto the shutoff valve as shown.

A B

_/4" (6 mm)

max.

2" (5 cm)

84 II

(213.4 cm)

A. Center board ¼" (6.35 mm) max. above refrigerator B. Two 2" x 4" x 32" (5 cm x 10 cm x 81 cm) boards C. Attach to studs with six #8 x 3" (7.6 cm) screws D. Compressor cover

E.Distance from bottom of anti-tip board to floor

.... ..... ...._ e W_''__< _ ' "_ _'

Read all directions before you begin. IMPORTANT: If you turn the refrigerator on before the water line is

connected, turn the ice maker OFE

Connect to Water Line

Parts Needed:

• Minimum 7 ft (2.13 m) flexible, codes approved water supply line

Style 1 - Shutoff Valve Connection NOTE: If your water line connection does not look like Style 1, see

"Style 2 - Copper Line Connection."

1. Unplug refrigerator or disconnect power supply.

IMPORTANT: Before attaching the tubing to shutoff valve, flush the main water supply line to remove particles and air in the water line. Allow enough flow so that water becomes clear. Flushing the water line may help avoid filters and/or water valves from

becoming clogged.

A.Bulb

B.Nut

C. Water tubing

Place the end of the tubing into a bucket, and turn shutoff valve ON.

Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.

Style 2 - Copper Line Connection

NOTE: If there is a water supply line that meets the specifications in "Water Supply Requirement" proceed to "Connecting to

Refrigerator." If not, use the following instructions to connect to the household cold water supply.

1. Unplug refrigerator or disconnect power.

2. Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.

3. Locate a 1/2"to 1V4"(1.25 cm to 3.18 cm) vertical cold water pipe near the refrigerator.

IM PORTANT:

• Make sure it is a cold water pipe.

• Horizontal pipe will work, but drill on the top side of the

pipe, not the bottom. This will help keep water away from the drill and normal sediment from collecting in the valve.

4. Determine the length of copper tubing you need. Measure from the connection on the lower left rear of refrigerator to the

water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use V4" (6.35 mm) O.D. (outside diameter) copper tubing. Be sure both ends of copper tubing are cut square.

5. Using a cordless drill, drill a V4"(6.35 mm) hole in the cold water pipe you have selected.

................. A

G •..........•...............B

"'"', ................C

A. Cold water pipe B. Pipe clamp C. Copper tubing D. Compression nut

E. Compression sleeve F. Shutoff valve

G. Packing nut

6. Fasten the shutoff valve to the cold water pipe with the pipe clamp. Be sure the outlet end is solidly in the 1/4"(6.35 mm)

drilled hole in the water pipe and that the washer is under the pipe clamp. Tighten the packing nut. Tighten the pipe clamp screws slowly and evenly so washer makes a watertight seal. Do not overtighten.

becoming clogged.

7. Slip the compression sleeve and compression nut on the copper tubing as shown. Insert the end of the tubing into the outlet end squarely as far as it will go. Screw compression nut

onto outlet end with adjustable wrench. Do not overtighten the clamp or the sleeve. This will crush the copper tubing.

8. Turn off the shutoff valve on the water pipe. Coil the copper tubing.

9. Connect the flexible, codes approved water supply line to the water shutoff valve by threading the provided nut onto the

shutoff valve.

10. Place the end of the tubing into a bucket, and turn shutoff valve ON.

11. Check for leaks around the saddle valve. Tighten any nuts or connections (including connections at the valve) that leak.

Connect to Refrigerator

Parts Supplied:

• 1/4"to 1A" 3.35 mm to 6.35 mm) male-to-male coupling

Connect the 7 ft (2.13 m) flexible codes approved water supply line to the refrigerator.

NOTE: If the main water shutoff valve is behind the refrigerator, a secondary water shutoff valve may be installed

in line with the water supply line at the front of the product.

A.Household water line E. Bulb B.Nut (purchased) F Nut

C.Ferrule (purchased) G.Refrigerator water tubing D.Coupfing

Turn on the water supply valve and check all connections for leaks.

Plug in the refrigerator or reconnect power.

Flush the water system. See "Water System Preparation." NOTE: Allow 24 hours to produce the first batch of ice.

Discard the first three batches of ice produced. Allow 3 days to completely fill ice container.

_ _ _ _

II (2.54 cm) t (17.78 cm)

zTi

I 1

I I

NOTE: The flexible, codes approved water supply line can connect to the supply valve through the floor or through the side cabinets, as indicated by the gray boxes above.

1. Unplug the refrigerator or disconnect power.

2. Connect the 7 ft (2.13 m) flexible codes approved water tube to the water supply valve.

3. Flush the main water supply line to remove particles and air in the water line. Allow enough flow so that water becomes clear.

4. Tape the 7 ft (2.13 m) flexible codes approved water supply line to the floor, 7" (17.78 cm) from the left side of the refrigerator. Tape along the length of the tubing, which will

allow it to pass beneath the refrigerator without interference. NOTE: Allow a minimum of 26" (66.04 cm) of flexible codes

approved water supply line to be loose at the front of the refrigerator for connecting to the refrigerator.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

1. Set control switch at top of cabinet to the OFF position.

2. Plug into a grounded 3 prong outlet.

Mo /e tge <s to , kocc on

A F ef ge ot

Tip Over Hazard

Refrigerator is top heavy and tips easily when not

completely installed.

Keep doors taped closed until refrigerator is

completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

IM PORTANT:

• To avoid floor damage, make sure levelers are raised (not touching floor) and refrigerator is on rollers before moving.

Use the installation block, attached to the door hinge, as a reference to make sure the refrigerator is pushed back far

enough into the opening, so that when the panels are installed they will be flush with the adjacent cabinets.

After the refrigerator is leveled and aligned, remove the installation block from the door hinge and use it to check the

spacing between the panels and adjacent cabinets. NOTE: The installation block is designed to provide accurate

spacing for 3/4"(1.9 cm), 3/8"(9.53 mm) and 1/8"(3.18 mm).

"_ _ "=_ \4 _IA"

_',,lu" "_" _'uu" m --T (3.18 mm)

Place top of cardboard carton or plywood under refrigerator.

__%,, I'

(9.53 mm)

Remove dolly.

Move the refrigerator straight back and evenly into the opening. Be sure that the water tubing is not kinked and the power supply cord is on top of the refrigerator.

NOTE: If the power supply cord is behind the refrigerator, it will not install properly.

Make sure the installation block is flush with the adjacent cabinets.

NOTE: To achieve aflush installation, it is critical to verify a3/4" (1.9 cm) depth from the front face of the adjacent cabinetry to the refrigerator.

Tip Over Hazard

Refrigerator is top heavy and tips easily when not

completely installed.

Keep doors taped closed until refrigerator is

completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

IMPORTANT: All four leveling legs must contact the floor to support and stabilize the full weight of refrigerator. Rollers are for moving the refrigerator, not for permanent support.

After moving the refrigerator to its final location:

1. Use a _e" socket driver to turn the leveling bolts clockwise to extend the legs to the floor as shown. The rollers should be off

the floor.

A. Rear leveling bolt

B. Front leveling bolt

2. Adjust the leveling legs to level and align the refrigerator from left to right and front to back so that the refrigerator is level

and aligned with the cabinets.

O O

A. Adjacent cabinet or wall B. Installation block

C. Face of refrigerator

3. 3. Using two round head screws (provided) for each bracket,

Continue adjusting all of the leveling legs to raise the refrigerator until the top is within at least 1/4"(6.35 mm) of the

anchor the refrigerator to the adjacent cabinets.

top soffit. NOTE: If an anti-tip board has been used, adjust the leveling

legs until the top of the refrigerator is within 1/4"(6.35 mm) of the bottom of the anti-tip board as shown. Do not crush the

compressor cover.

A B

..................C

_/4" (6 mm)

....... °i

2" (5 cm) _ •

max.

84 II

(213.4 cm)

A. Center board ¼" (6.35 mm) max. above refrigerator

B. Two 2" x 4" x 32" (5 cm x 10 cm x 81 cm) boards C. Attach to studs with six #8 x 3" (7.6 cm) screws D. Compressor cover

E. Distance from bottom of anti-tip board to floor

IMPORTANT: Adjust in small increments to keep from damaging the cabinet trim and causing problems with the

door alignment or top grille fit. To avoid damage to the cabinet or leveling legs, do not apply more than 50 inch-pounds (5.65 Nm) of torque to the leveling bolts. The leveling legs can be extended to a maximum of 11/4"(3.18 cm) below the rollers.

After leveling the refrigerator, again use a straight edge or 4 foot level across the front of the refrigerator installation blocks to the cabinets to check that the refrigerator is still

flush.

IMPORTANT: Jenn-Air is not responsible for the removal or addition of molding or overlay panels that would not allow access

to the refrigerator for service.

Install Refrigerator to Adjacent Cabinets

1. Open the refrigerator and freezer doors to locate the cabinet brackets on each side.

2. Using the bracket holes as a template, predrill a 1/8"deep pilot hole into the adjacent cabinet.

4. Repeat steps 2 and 3 to anchor the other side of the refrigerator to the adjacent cabinets.

Install Cabinet Side Trims

Install cabinet side trims to hide the brackets fastening the refrigerator to the adjacent cabinets.

1. Open both doors to a 90° angle.

2. With the lip edge of the trim toward the back wall, insert the cabinet side trim between the side of the refrigerator and the

adjacent cabinetry. NOTE: Keep the top edge of the trim piece flush with the top

of the refrigerator. Installing the trim higher than the refrigerator top could cause damage to the trim when the door

is opened.

3. Slide the trim toward the back until it snaps into place.

A ..........

A. Cabinet side trim

B. Freezer door

Install Top Grille Filler(standard installation only)

IMPORTANT: The grille panel height allows the necessary airflow

for refrigerator performance. The top grille filler hides the upper compartment cover behind the top grille. If you choose to modify the recommended grille panel dimensions, performance will be compromised.

Custom Wood Panel Models

1. In the custom made (1" x width of grille panel) wood filler piece, drill a hole 11_46"from each edge.

NOTE: Make sure the hole is centered in the 1" thickness of the wood piece.

2. Using slotted hex head screws (provided), fasten an "L" bracket to each end of the wood filler piece.

3. Using hex head blunt screws (provided), attach the "L" brackets to the top grille mounting plates.

4. Adjust the "L" brackets, so that the wood filler piece is flush with the bottom of the soffit. Completely tighten the screws.

Panel Kit Models

Excessive Weight Hazard

Use two or more people to move and install panels. Failure to do so can result in back or other injury.

Align top grille filler (provided inthe door kit) with the bottom edge of the soffit. Use as a template, and mark where to drill

the holes.

Using the slotted hex head screws (provided), attach the top grille filler to the soffit.

A. Top grille filler B. Hex head screw (provided)

Side View

A. Custom wood filler B. "L" bracket

Side View

A. Top grille rifler B. Soffit

C. Airflow

C. Grille mounting plate

......... A

.......... S

........ S

............. D

...... C

.......... D

......... E

D. Grille panel E. Door panel

A. Soffit C. Grille panel

B.Airflow D. Door panel

Drilling Templates (custom wood panels only)

IMPORTANT: The template can be used for either a 3/8"(0.95 cm) or a 1/8"(0.32 cm) reveal installation.

• The drilling templates are double-sided.

• On the template, locate the diagram of your refrigerator. Then, follow the letters and colored arrows to correctly place the drilling template on the panels.

• The drilling holes are precut into the template.

Prepare Custom Overlay Panels

IM PORTANT:

• The process for installingoverlay panels on the refrigerator is the same for both custom panels and panel kits.

• The drilling templates are used only for custom wood overlay panels.

The panels included in the panel kits are predrilled for the mounting brackets only. See "Complete Installation" later in this section, for instructions on drilling additional holes in the door panels.

• The film covering on stainless steel door panels must be removed before installing brackets.

1. Place panels on a firm, flat surface with the front facing down.

2. Using the templates (provided), predrill a 1/8"deep pilot hole into the wood rails bordering the doors and top grille panels.

Follow the instructions printed on the template.

3. Using the installation block as a guide for depth, screw the door studs (provided) into the predrilled door panel (two door

studs per door).

6. Using the slotted hex head screws provided, attach a mounting bracket to each side of the grille panel.

NOTES:

• See the Parts Provided insert sheet to select the brackets

designated for your installation.

• Use the Integrated Grille brackets for an Integrated

Installation with a full height grille.

• Use the Standard Grille brackets for a Standard

Installation with a flush grille, as shown.

7. Using round head screws (provided), attach the grille trim piece to the bottom of the grill panel.

A. Top grille brackets B. Grille trim piece

A. Door stud B. Installation block

Insert hex head pointed screws (provided) into the wood at the top of the door panels where they were predrilled.

NOTE: It is critical to use the %" screw, the longest length provided, to attach the bracket to the top of the door panel.

These hex head pointed screws are used only to attach this mounting bracket.

Attach a mounting bracket to the top edge of each door panel by placing the large end of the keyhole slot over the screws

and sliding the bracket so that the screws are centered in the slots.

NOTE: Start with the screws in the center of the slots as shown, then move the door panel, as necessary, to align.

A B

Remove Trim Pieces

Remove all tape and door bracing from the refrigerator and freezer doors.

Open the refrigerator and freezer doors.

Remove the hinge cover pieces from the top and bottom of the door to expose the holes in the hinges.

NOTE: It is not necessary to remove the hinge side trims as they will not interfere with the installation.

A. Door panel B. Mounting bracket

nnnnlllllllllllllllllllllllln n nnlllllllltlllllllllllll

A. Hinge cover pieces

B.Handle-side door trim

Install Door Panels

Install Top Grille Panel

1. Lower the panel mounting bracket onto the adjustment pins at

the top of the door.

A.Door panel C.Adjustment pins B.Mounting bracket

Slide the studs, on the back side of the door panel, into the "J" pockets in the front of the door.

Flush Grille - Standard Installation

1. Hook the panel brackets onto the mounting bolts extending from the top of the refrigerator.

2. Pull the grille panel down slightly to lock into place.

Full Height Grille - Integrated Installation

1. Align the bracket with the mounting posts.

2. Push the grille panel forward until the bracket snaps into place.

A. Top grille panel B. Cabinet sides

Door Swing Adjustment

It may be necessary to adjust the swing of the door. Make sure the refrigerator door(s) can open freely. If the door(s) opens too wide, install the door stop pin (provided).

1. Hold the door open to a position that is less than 90°.

2. Insert the door stop pin into the top hinge in the hole shown.

3. Using a 5/32"Allen wrench, tighten the door stop pin.

Repeat steps 1 and 2 to install the second door panel.

Using slotted hex head screws (provided), attach the mounting bracket (factory installed), located at the bottom of the refrigerator and freezer doors, to the respective door

panels. Do not fully tighten the screw.

o ©_

A B

A. Bottom hinge B. Mounting bracket

A. Door stop pin hole

+ 42 hidden pages