JENN-AIR JMW2427WW, JMW2427WS, JMW2427WB, JMW2330WS, JMW2330WB Installation Instructions

...

0 (0)

INSTALLATION INSTRUCTIONS

27" (68.6 CM) AND 30" (76.2 CM) ELECTRIC BUILT-IN

MICROWAVE/OVEN COMBINATION

INSTRUCTIONS D’INSTALLATION

FOUR À MICRO-ONDES ET FOUR CONVENTIONNEL ÉLECTRIQUES COMBINÉS ET ENCASTRÉS DE

27" (68,6 CM) ET 30" (76,2 CM)

Table of Contents / Table des matières

BUILT-IN MICROWAVE/OVEN COMBINATION SAFETY	.................2
INSTALLATION REQUIREMENTS ......................................................	2
Tools and Parts ..................................................................................	2
Location Requirements......................................................................	2
Electrical Requirements .....................................................................	4
INSTALLATION INSTRUCTIONS ........................................................	5
Prepare Built-In Microwave/Oven Combination................................	5
Remove Oven Door............................................................................	5
Make Electrical Connection ...............................................................	5
Install Oven.........................................................................................	7
Complete Installation ........................................................................	8

SÉCURITÉ DU FOUR À MICRO-ONDES ET DU FOUR
CONVENTIONNEL COMBINÉS ET ENCASTRÉS..............................	9
EXIGENCES D'INSTALLATION ...........................................................	9
Outillage et pièces .............................................................................	9
Exigences d'emplacement ................................................................	9
Spécifications électriques................................................................	11
INSTRUCTIONS D'INSTALLATION ..................................................	12
Préparation de l'ensemble des fours encastrés
(micro-ondes/conventionnel)...........................................................	12
Dépose de la porte du four..............................................................	12
Raccordement électrique ................................................................	12
Installation du four ...........................................................................	14
Achever l'installation ........................................................................	16

IMPORTANT:

Save for local electrical inspector's use.

IMPORTANT :

À conserver pour consultation par l'inspecteur local des installations électriques.

W10221384C

BUILT-IN MICROWAVE/OVEN COMBINATION SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean:

DANGER

WARNING

You can be killed or seriously injured if you don't immediately follow instructions.

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools needed

■Adjustable wrench or ⁄ " wrench

■Phillips screwdriver

■Flat-blade screwdriver

■Measuring tape

■Drill (for wall cabinet installations)

■1¹⁄ " (3.4 cm) drill bit (for wall cabinet installations)

■Level

Parts needed

■UL listed or CSA approved conduit connector

■UL listed wire connectors

Parts supplied

■Six # 8–14 x ³⁄ " screws

■Bottom vent

■Two # 8–18 x ³⁄ " screws - bottom vent

Check local codes. Check existing electrical supply. See “Electrical Requirements.”

It is recommended that all electrical connections be made by a licensed, qualified electrical installer.

Location Requirements

Make sure you have everything needed for correct installation. IMPORTANT: Observe all governing codes and ordinances.

■Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance with oven.

■Recessed installation area must provide complete enclosure around the recessed portion of the oven.

■Grounded electrical supply is required. See “Electrical Requirements” section.

■Electrical supply junction box should be located 3" (7.6 cm) maximum below the support surface when the oven is installed in a wall cabinet. A 1¹⁄ " (3.4 cm) minimum diameter hole should have been drilled only in the left rear corner of the support surface to pass the appliance cable through to the junction box.

■Oven support surface must be solid, level and flush with bottom of cabinet cutout. Floor must be able to support a total weight of (microwave and built-in oven) of 249 lbs (113 kg) for 30" (76.2 cm) oven and 236 lbs (107 kg) for 27" (68.6 cm) oven.

IMPORTANT: To avoid damage to your cabinets, check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate or sustain other damage. This oven has been designed in accordance with the requirements of UL and CSA International and complies with the maximum allowable wood cabinet temperatures of 194° (90°C).

JENN-AIR JMW2427WW, JMW2427WS, JMW2427WB, JMW2330WS, JMW2330WB Installation Instructions

Product Dimensions

27" (68.6 cm) models

A.25¹⁄ " (64.1 cm) max. recessed width

B.43¹⁄ " (109.4 cm) max. overall height

C.26³⁄ " (67.9 cm) max. overall width

D.23 ⁄ " (60.0 cm) max. recessed depth

E.41" (104.2 cm) max. recessed height

30" (76.2 cm) models

A.28" (71.1 cm) max. recessed width

B.43¹⁄ " (109.4 cm) max. overall height

C.29³⁄ " (75.6 cm) max. overall width

D.23 ⁄ " (60.0 cm) max. recessed depth

E.41" (104.2 cm) max. recessed height

Cabinet Dimensions

27" (68.6 cm) models

A.27" (68.6 cm) min. cabinet width

B.43 ⁄ " (110.0 cm) from bottom of cutout to bottom of upper cabinet door

C.19¹⁄ " (48.9 cm) recommended bottom of cutout to floor. 4" (10.2 cm) to 19¹⁄ " (48.9 cm) bottom of cutout to floor is acceptable.

D.25¹⁄ " (64.8 cm) cutout width

E.1¹⁄ " (3.8 cm) min. bottom of cutout to top of cabinet door

F. 41¹⁄ " (104.8 cm) cutout height

G.24" (61.0 cm) minimum cutout depth

30" (76.2 cm) models

A.30" (76.2 cm) min. cabinet width

B.43 ⁄ " (110.0 cm) from bottom of cutout to bottom of upper cabinet door

C.19¹⁄ " (48.9 cm) recommended bottom of cutout to floor. 4" (10.2 cm) to 19¹⁄ " (48.9 cm) bottom of cutout to floor is acceptable.

D.28¹⁄ " (72.4 cm) cutout width

E.1¹⁄ " (3.8 cm) min. bottom of cutout to top of cabinet door

F. 41¹⁄ " (104.8 cm) cutout height

G.24" (61.0 cm) minimum cutout depth

Electrical Requirements

If codes permit and a separate ground wire is used, it is recommended that a qualified electrical installer determine that the ground path and the wire gauge are in accordance with local codes.

Check with a qualified electrical installer if you are not sure the oven is properly grounded.

This oven must be connected to a grounded metal, permanent wiring system.

Be sure that the electrical connection and wire size are adequate and in conformance with the National Electrical Code, ANSI/NFPA 70-latest edition or CSA Standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No. O-M91-latest edition, and all local codes and ordinances.

A copy of the above code standards can be obtained from:

National Fire Protection Association

One Batterymarch Park

Quincy, MA 02269

CSA International

8501 East Pleasant Valley Road

Cleveland, OH 44131-5575

Electrical Connection

To properly install your oven, you must determine the type of electrical connection you will be using and follow the instructions provided for it here.

■Oven must be connected to the proper electrical voltage and frequency as specified on the model/serial number rating plate. The model/serial number rating plate is located near center vent of the lower oven. See the following illustration.

■Models rated from 7.3 to 9 kW at 240 volts (5.4 to 7.4 kW at 208 volts) require a separate 40-amp circuit. Models rated at 4.8 kW and below at 240 volts (3.6 kW and below at 208 volts) require a separate 20-amp circuit.

■A circuit breaker is recommended.

■Connect directly to the fused disconnect (or circuit breaker box) through flexible, armored or nonmetallic sheathed, copper cable (with grounding wire). See “Make Electrical Connection” section.

■Flexible conduit from the oven should be connected directly to the junction box.

■Do not cut the conduit. The length of conduit provided is for serviceability of the oven.

■A UL listed or CSA approved conduit connector must be provided.

■If the house has aluminum wiring follow the procedure below:

1.Connect a section of solid copper wire to the pigtail leads.

2.Connect the aluminum wiring to the added section of copper wire using special connectors and/or tools designed and UL listed for joining copper to aluminum.

Follow the electrical connector manufacturer's recommended procedure. Aluminum/copper connection must conform with local codes and industry accepted wiring practices.

A.Model/serial number plate (located on underside of center vent)

INSTALLATION INSTRUCTIONS

Prepare Built-In Microwave/Oven

Combination

1.Decide on the final location for the oven. Avoid drilling into or severing wiring during installation.

WARNING

Excessive Weight Hazard

Use two or more people to move and install oven. Failure to do so can result in back or other injury.

2.To avoid floor damage, set the oven onto cardboard prior to installation. Do not use handle or any portion of the front frame for lifting.

3.Remove the shipping materials and tape from the oven.

4.Remove the hardware package from inside the bag containing literature.

5.Remove and set aside racks and other parts from inside the oven.

6.Move oven and cardboard close to the oven’s final location.

Remove Oven Door

IMPORTANT: Use both hands to remove oven door(s).

1.Open the oven door to the full open position.

2.Locate the oven door latches in both corners of the oven door, and rotate the latches forward to the unlocked position.

A. Oven door latch in locked	B. Oven door latch in unlocked
position	position

3.Grasp the edges of the oven door with both hands and close the oven door until it will no longer close. Lift and pull oven door toward you and remove. Set the oven door(s) aside on a covered work surface.

Make Electrical Connection

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Use 8 gauge solid copper wire.

Electrically ground oven.

Failure to follow these instructions can result in death, fire, or electrical shock.

This oven is manufactured with a neutral (white) power supply wire and a cabinet-connected green (or bare) ground wire twisted together.

1.Disconnect power.

2.Feed the flexible conduit from the oven through the opening in the cabinet.

3.Remove junction box cover, if it is present.

+ 11 hidden pages