Jenn-Air JMC7010ADB, JMC7010ADW Dimension Guide
www.dexpress.com DIMENSION EXPRESS Fax on Demand (775) 833-3600
This Data Sheet Includes Information On
Jenn-Air
• Product Model Number (s): •
Built-in Microwaves:
JMC7010ADB and JMC7010ADW
• Dimensions (Actual Size) •
Height including feet:
Unit width:
Depth:
13 5/16"
18 5/16"
23 1/4"
• Additional Information •
• Unit must be built-in.
• Electrical requirements: Voltage 120, single phase,
60Hz. AC. 15 amp fuse ( 20 amp fuse recommended).
Ground circuit required. Locate outlet box in the
cabinet behind the microwave (flush mount is required
for cabinets less than 24" deep).
• For built-in applications the cabinet floor must be level
and capable of supporting 80 lbs.
• Approved for installation over Jenn-Air single wall
ovens.
• For a new installation, the bottom of the cutout should
be 48" above the floor. This places the bottom of the
microwave 50" above the floor.
Kits:
• MMA27B (black) and MM27AW (white) : Trim kit for
built-in installation. See page 2 for cutout dimensions.
• MMA30B (black) and MMA30W (white) : Trim kit for
built-in installation. See page 2 for cutout dimensions.
See page 2 for additional information
23 1/4"
13 5/16"
(not to scale)
18 5/16"
Subject to change without notice. This system is designed to
be updated daily if necessary. Dimension Express is not
responsible for use of superseded, voided, or outdated data
sheets. Because of the difficulty or impracticability of determining actual damages, liability of Dimension Express shall
not exceed $50.00.
Copyright © Dimension Express, 2002.
• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at (775) 833-3633 •
notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.
132
BN207.5 • A132B315 • • 032603 • 95656 • 59427
www.dexpress.com
DIMENSION EXPRESS
Fax on Demand (775) 833-3600
Additional Information:
This Data Sheet Includes Information On
Jenn-Air
• Product Model Number (s): •
Page 2
Built-in Microwaves:
JMC7010ADB and JMC7010ADW
JMC7010ADB installed with Trim Kit MMA30B
JMC7010ADW installed with Trim Kit MMA30W
19" min.
28 3/16"
Oven cutout or
cabinet below
(Check oven
specifications for
oven cutout)
19" min.
25 1/2"
Oven cutout or
cabinet below
(Check oven
specifications for
oven cutout)
(not to scale)
16 1/16"
48"
recommended
distance to floor.
JMC7010ADB installed with Trim Kit MMA27B
JMC7010ADW installed with Trim Kit MMA27W
(not to scale)
16 1/16"
48"
recommended
distance to floor.
Minimum cabinet width: 30"
Cutout width: 28 3/16"
Cutout height: 16 1/16"
Minimum cabinet depth: 17"
Overall trim kit width: 29 3/4"
Overall trim kit height: 17"
Top overlap: 15/32"
Bottom overlap: 15/32"
Right overlap: 25/32"
Left overlap: 25/32"
Minimum cabinet width: 27"
Cutout width: 25 1/2"
Cutout height: 16 1/16"
Minimum cabinet depth: 17"
Overall trim kit width: 26 3/4"
Overall trim kit height: 17"
Top overlap: 15/32"
Bottom overlap: 15/32"
Right overlap: 5/8"
Left overlap: 5/8"
Subject to change without notice. This system is designed to be updated daily if necessary. Dimension Express is not responsible for use of superseded, voided, or
outdated data sheets. Because of the difficulty or impracticability of determining actual damages, liability of Dimension Express shall not exceed $50.00.
Copyright © Dimension Express, 2002.
• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at (775) 833-3633 •
notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.
BN207.5 • A132B315 • • 032603 • 95656 • 59427
315
Loading...