JMC7010
Dimensions
|
Inches |
Centimeters |
A |
see chart below |
see chart below |
B |
see chart below |
see chart below |
Cz |
48 |
121.9 |
D |
16 1/16 |
40.8 |
E |
13 5/16 |
33.8 |
|
|
|
F |
23 1/4 |
59.1 |
G |
18 5/16 |
46.5 |
Trim Kit Dimensions
Model |
A |
B |
MMA27 |
25 1/2" |
28 3/4" minimum |
|
|
|
MMA30 |
28 3/16" |
28 3/4" minimum |
Notes:
Y.When installing this Kit above a built-in oven, check built-in oven installation instructions to determine cutout dimensions for the (lower) wall oven.
Z.For a new installation, the 48" height dimension to the bottom of the cutout
for the microwave oven is recommended. This places the microwave oven bottom at approximately 50" from the floor.
1.Model JMC7010 is for use with trim kits for built-in installation. Do not install above gas wall ovens due to placement of gas wall oven vent. JMC7010 cannot be used in countertop applications.
2.Trim kits to install JMC7010 include: For 27" wall oven, use MMA27, installed dimensions are 17"H x 26 3/4"W. For 30" wall ovens, use MMA30, installed dimensions are 17"H x 29 3/4"W.
These appliances have been designed in accordance with the requirements of various safety agencies and comply with the maximum allowable wood cabinet temperatures of 194 degrees F. If these appliances are installed with cabinets that have a lower working temperature than 194 degrees F, discoloration, delamination or melting may occur.
Important: Because of continuing product improvements, Jenn-Air reserves the right to change specifications without notice. Dimensional specifications are provided for planning purposes only. For complete details see installation instructions that accompany each product before selecting cabinetry, making cutouts or beginning installation.
Loading...