Jenn-Air JJW2327WB00, JJW2327WS00, JJW2330WB00, JJW2330WS00, JJW2330WS01 Installation Guide
...
INSTALLATIONINSTRUCTIONS
27" (68.6 CM) AND 30" (76.2 CM) ELECTRICSINGLE
AND DOUBLEBUILT-INOVEN
INSTRUCTIONSD'INSTALLATION
FOUR ELECTRIQUEENCASTREDE27" (68,6 CM)
ET30" (76,2 CM) - SIMPLEETDOUBLE
Table of Contents / Table des mati_res
BUILT-IN OVEN SAFETY ..................................................................... 2
INSTALLATION REQUIREMENTS ...................................................... 2
Tools and Parts .................................................................................. 2
Location Requirements ...................................................................... 2
Electrical Requirements ..................................................................... 5
INSTALLATION INSTRUCTIONS ........................................................ 5
Prepare Built-In Oven ......................................................................... 5
Remove Oven Door ............................................................................ 5
Make Electrical Connection ............................................................... 6
Install Oven ......................................................................................... 7
Complete Installation ......................................................................... 8
SI_CURITI_ DU FOUR ENCASTRI_ ....................................................... 9
EXIGENCES D'INSTALLATION ............................................................ 9
Outils et pieces ................................................................................... 9
Exigences d 'emplacement ................................................................. 9
Specifications electriques ................................................................. 12
INSTRUCTIONS D'INSTALLATION ................................................... 13
Preparation du four encastre ............................................................ 13
D_pose de la porte du four ............................................................... 13
Raccordement electrique ................................................................. 14
Installation du four ............................................................................ 15
Achever I'installation ......................................................................... 16
iMPORTANT:
Save for local electrical inspector's use.
iMPORTANT :
,&,conserver pour consultation par I'inspecteur local des installations 61ectriques.
W10221386C
BUILT-INOVEN SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
INSTALLATIONREQUIREMENTS
tbos c nd <sds
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
• Phillips screwdriver
• Flat-blade screwdriver
• Measuring tape
• Drill (for wall cabinet installations
• 11/4"(3.4 cm) drill bit (for wall cabinet installations)
• Level
Parts needed
• UL listed or CSA approved conduit connector
• UL listed wire connectors
Parts supplied
• # 8-14 x 3/4"screws - single oven (4), double oven (8)
• Bottom vent (supplied on some models)
• Two # 8-18 x 3/8"screws - bottom vent
Check local codes. Check existing electrical supply. See
"Electrical Requirements."
It is recommended that all electrical connections be made by a
licensed, qualified electrical installer.
Make sure you have everything needed for correct installation.
IMPORTANT: Observe all governing codes and ordinances.
• Cabinet opening dimensions that are shown must be used.
Given dimensions provide minimum clearance with oven.
• Recessed installation area must provide complete enclosure
around the recessed portion of the oven.
• Grounded electrical supply is required. See "Electrical
Requirements" section.
• Electrical supply junction box should be located 3" (7.6 cm)
maximum below the support surface when the oven is
installed in a wall cabinet. A 1V4"(3.4 cm) minimum diameter
hole should have been drilled in the right rear corner of the
support surface to pass the appliance cable through to the
junction box.
NOTE: For undercounter installation, it is recommended that
the junction box be located in the adjacent right or left
cabinet. Ifyou are installing the junction box on rear wall
behind oven, the junction box must be recessed and located
in the upper or lower right or left corner of the cabinet;
otherwise, the oven will not fit into the cabinet opening.
• Oven support surface must be solid, level and flush with
bottom of cabinet cutout. Floor must be able to support a 27"
(68.6 cm) single oven weight of 138 Ibs (63 kg) or a 30"
(76.2 cm) single oven weight of 154 Ibs (70 kg). Floor must be
able to support a 27" (68.6 cm) double oven weight of
278 Ibs (126 kg) or a 30" (76.2 cm) double oven weight of
303 Ibs (138 kg).
IMPORTANT: To avoid damage to your cabinets, check with your
builder or cabinet supplier to make sure that the materials used
will not discolor, delaminate or sustain other damage. This oven
has been designed in accordance with the requirements of UL
and CSA International and complies with the maximum allowable
wood cabinet temperatures of 194 ° (90°C).
Undercounter Installation (with cooktop installed above):
Ovens approved for this type of installation have an approval label
located on the top of the oven. Refer to undercounter installation
instructions for cutout dimensions and approved oven cooktop
combinations (separate sheet).
2
ProductDimensions-SingleOvens
A
E
Single Ovens Installed in Cabinet
A
B
E
t
27" (68.6 cm) models
A. 251/4"(64.1 cm) max. recessed
width
B. 291/2''(75.0 cm) max. overall
height
C. 263/4''(67.9 cm) max. overall
width
D. 243/8''(61.9 cm) max. overall
depth
E. 263/4''(68.0 cm) max. recessed
height
30" (76.2 cm) models
A. 28" (71.1 cm) max. recessed
width
B. 291/2'' (75.0 cm) max. overall
height
C. 293/4'' (75.6 cm) max. overall
width
D. 24%" (61.9 cm) max. overall
depth
E.263/4'' (68.0 cm) max. recessed
height
Cabinet Dimensions - Single Ovens
SingleOven Undercounter (without cooktop installedabove)
A
B
1
D_ C
27" (68.6 cm) models
A. 27" (68.6 cm) min. cabinet width
B. 293/4''(75.5 cm) from bottom of
cutout to bottom of upper
cabinet door
C. 32" (81.3 cm) recommended
bottom of cutout to floor.
4" (10.2 cm) to 32" (81.3 cm)
bottom of cutout to floor is
acceptable.
D. 251/2''(64.8 cm) cutout width
E. 11/2'' (3.8 cm) min. bottom of
cutout to top of cabinet door
F. 273/4''(70.5 cm) Recommended
cutout height (will fit cutout
height from 27" [68.6 cm] to
291A6'' [73.8 cm])
G. 24" (61.0 cm) minimum cutout
depth
30" (76.2 cm) models
A. 30" (76.2 cm) min. cabinet width
B. 293/4''(75.5 cm) from bottom of
cutout to bottom of upper
cabinet door
C. 32" (81.3 cm) recommended
bottom of cutout to floor.
4" (10.2 cm) to 32" (81.3 cm)
bottom of cutout to floor is
acceptable.
D. 281/2''(72.4 cm) cutout width
E. 11/2'' (3.8 cm) min. bottom of
cutout to top of cabinet door
F. 273/4''(70.5 cm) Recommended
cutout height (will fit cutout
height from 27" [68.6 cm] to
291/16'' [73.8 cm])
G. 24" (61.0 cm) minimum cutout
depth
27" (68.6 cm) models
A. 27" (68.6 cm) min. cabinet
width
B. 301/2''(77.5 cm) min. from
bottom of cutout to underside
of countertop.
C. 4%" (11.7 cm) bottom of
cutout to floor
D. 251/2''(64.8 cm) cutout width
E. 273/4''(70.5 cm)
Recommended cutout height
(will fit cutout height from
27" [68.6 cm] to 291/16''
[73.8 cm])
30" (76.2 cm) models
A. 30" (76.2 cm) min. cabinet
width
B. 301/2"(77.5 cm) min. from
bottom of cutout to underside
of countertop.
C. 45/8'' (11.7 cm) bottom of
cutout to floor
D. 281/2"(72.4 cm) cutout width
E. 273/4''(70.5 cm)
Recommended cutout height
(will fit cutout height from
27" [68.6 cm] to 29 H6"
[73.8 cm])
1
Product Dimensions - Double Ovens
Cabinet Dimensions - Double Ovens
Double Ovens Installedin Cabinet
IJJ
B
E
27" (68.6 cm) models
A. 251/4" (64.1 cm) max. recessed
width
B. 521/4'' (132.8 cm) max. overall
height
C. 263/4'' (67.9 cm) max. overafl
width
D. 243/8'' (61.9 cm) max. overall
depth
E. 491/2"(125.8 cm) max. recessed
heigh
f
J
J
30" (76.2 cm) models
A. 28" (71.1 cm) max. recessed
width
B. 521/4''(132.8 cm) max. overall
height
C. 293/4''(75.6 cm) max. overall
width
D. 24%" (61.9 cm) max. overall
depth
E. 491/2"(125.8 cm) max.
recessed height
F
E
27" (68.6 cm) models
A. 27" (68.6 cm) min. cabinet width
B. 521/2'' (133.4 cm) from bottom of
cutout to bottom of upper
cabinet door
C. 143/4'' (37.5 cm) recommended
bottom of cutout to floor. 4"
(10.2 cm) to 143/4'' (37.5 cm)
bottom of cutout to floor is
acceptable.
D. 251/2'' (64.8 cm) cutout width
E. 11/2'' (3.8 cm) min. bottom of
cutout to top of cabinet door
F. 493/4'' (126.4 cm) recommended
cutout height (will fit cutout
height from 493/4'' {126.4 cm} to
5115/16'' {131.9 cm})
G. 24" (61.0 cm) minimum cutout
depth
30" (76.2 cm) models
A. 30" (76.2 cm) min. cabinet width
B. 521/2''(133.4 cm) from bottom of
cutout to bottom of upper
cabinet door
C. 143/4'' (37.5 cm) recommended
bottom of cutout to floor. 4"
(10.2 cm) to 143/4'' (37.5 cm)
bottom of cutout to floor is
acceptable.
D. 281/2" (72.4 cm) cutout width
E. 11/2'' (3.8 cm) min. bottom of
cutout to top of cabinet door
F. 493/4'' (126.4 cm) recommended
cutout height (will fit cutout
height from 493/4'' {126.4 cm} to
511%6" {131.9 cm})
G. 24" (61.0 cm) minimum cutout
depth
If codes permit and a separate ground wire is used, it is
recommended that a qualified electrical installer determine that
the ground path and the wire gauge are in accordance with local
codes.
Check with a qualified electrical installer if you are not sure the
oven is properly grounded.
This oven must be connected to a grounded metal, permanent
wiring system.
Be sure that the electrical connection and wire size are adequate
and in conformance with the National Electrical Code, ANSI/NFPA
70-latest edition or CSA Standards O22.1-94, Canadian Electrical
Code, Part 1 and C22.2 No. O-M91-1atest edition, and all local
codes and ordinances.
A copy of the above code standards can be obtained from:
National Fire Protection Association
One Batterymarch Park
Quincy, MA 02269
CSA International
8501 East Pleasant Valley Road
Cleveland, OH 44131-5575
Electrical Connection
To properly install your oven, you must determine the type of
electrical connection you will be using and follow the instructions
provided for it here.
• Oven must be connected to the proper electrical voltage and
frequency as specified on the model/serial number rating
plate. The model/serial number rating plate is located under
the control panel on single ovens and under the control panel
in the upper oven cavity on double ovens. See the following
illustration.
A
INSTALLATIONINSTRUCTIONS
1. Decide on the final location for the oven. Avoid drilling or
cutting into house wiring during installation.
Excessive Weight Hazard
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
2. To avoid floor damage, set the oven onto cardboard prior to
installation. Do not use handle or any portion of the front
frame for lifting.
3. Remove the shipping materials and tape from the oven.
4. Remove the hardware package from inside the bag containing
literature.
5. Remove and set aside racks and other parts from inside the
oven.
6. Move oven and cardboard close to the oven's final location.
em ®Ove ©oo '
IMPORTANT: Use both hands to remove oven door(s).
1. Open the oven door.
2. Locate the oven door latches in both corners of the oven door,
and rotate the latches forward to the unlocked position.
Single Oven
A. Model/serial number plate
Models rated from 7.3 to 9 kW at 240 volts (5.4 to 7.4 kW at
208 volts) require a separate 40-amp circuit. Models rated at
4.8 kW and below at 240 volts (3.6 kW and below at 208 volts)
require a separate 20-amp circuit.
A circuit breaker is recommended.
Connect directly to the fused disconnect (or circuit breaker
box) through flexible, armored or nonmetallic sheathed,
copper cable (with grounding wire). See "Make Electrical
Connection" section.
Flexible cable from the oven should be connected directly to
the junction box.
Fuse both sides of the line.
Do not cut the conduit. The length of conduit provided is for
serviceability of the oven.
A UL listed or CSA approved conduit connector must be
provided.
If the house has aluminum wiring follow the procedure below:
1. Connect a section of solid copper wire to the pigtail
leads.
2. Connect the aluminum wiring to the added section of
copper wire using special connectors and/or tools
designed and UL listed for joining copper to aluminum.
Follow the electrical connector manufacturer's recommended
procedure. Aluminum/copper connection must conform with
local codes and industry accepted wiring practices.
Double Oven
A. Model/serial number plate
A. Oven door latch in locked
position
3.
Grasp the edges of the oven door with both hands and close
the oven door until it will no longer close. Lift and pull oven
door toward you and remove. Set the oven door(s) aside on a
covered work surface.
B. Oven door latch in unlocked
position
Loading...