JennAir JJB6424HM Use & Care Guide

JENNAIR® BUILT-IN COFFEE SYSTEM

MACHINE À ESPRESSO ENCASTRÉE JENNAIR

Use & Care Guide

For questions about features, operation/performance, parts, accessories, or service in the U.S.A., call:

1-800-JENNAIR (1-800-536-6247) or visit our website at www.jennair.com.

In Canada, call: 1-800-JENNAIR (1-800-536-6247) or visit our website at www.jennair.ca.

Guide d’utilisation et d’entretien

Pour des questions à propos des caractéristiques, du fonctionnement/rendement, des pièces, accessoires ou dépannage,

W11325607B

composerle:1-800-JENNAIR (1-800-536-6247) ou visitez notre site Web au www.jennair.com.

Au Canada, composer le 1800JENNAIR (1800536-6247) ou visiter notre site Web au www.jennair.ca.

TABLE OF CONTENTS TABLE DES MATIÈRES

COFFEE SYSTEM SAFETY ..........................................................3

PARTS AND FEATURES ................................................................4

BEFORE USING THE COFFEE SYSTEM ......................................6

COFFEE SYSTEM USE ..................................................................7

Settings ........................................................................................7

Selecting Coffee Strength ..........................................................10

Making Coffee or Espresso Using Coffee Beans ......................10

Selecting the Coffee Size ...........................................................11

Adjusting the Coffee Mill ............................................................11

Making Coffee using Pre-Ground Coffee ..................................12

Making Milk-Based Hot Drinks ..................................................12

Delivering Hot Water ..................................................................14

Steam Delivery ...........................................................................14

COFFEE SYSTEM CARE .............................................................14

General Cleaning ........................................................................14

TROUBLESHOOTING ..................................................................17

ASSISTANCE OR SERVICE .........................................................22

In the U.S.A. ...............................................................................22

In Canada ...................................................................................22

WARRANTY ..................................................................................23

SÉCURITÉ DE LA MACHINE À ESPRESSO .............................24

PIÈCES ET CARACTÉRISTIQUES ..............................................25

AVANT D’UTILISER LA MACHINE À ESPRESSO ......................27

UTILISATION DE LA MACHINE À ESPRESSO .......................... 28

Settings (réglages) ......................................................................28

Sélection de l’intensité du café ..................................................32

Préparer une boisson ou unexpresso en utilisant

desgrainsdecafé ......................................................................32

Sélection de la taille de la tasse decafé ....................................33

Réglage du moulin à café ..........................................................33

Préparer une boisson en utilisant ducafé déjà moulu ..............33

Préparer une boisson à base de lait ..........................................34

Verser de l’eau chaude ...............................................................35

Préparation de vapeur ................................................................35

ENTRETIEN DE LA MACHINE À ESPRESSO ............................36

Nettoyage général ......................................................................36

DÉPANNAGE .................................................................................39

ASSISTANCE OU DÉPANNAGE ..................................................44

Aux É.-U. ....................................................................................44

Au Canada ..................................................................................44

GARANTIE .....................................................................................45

COFFEE SYSTEM SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

You can be killed or seriously injured if you don't immediately

DANGER

WARNING

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTA NT SAFETY INSTRUCTIONS

To reduce the risk of fire, electric shock, or injury to persons when using the appliance, follow basic precautions,

WARNING:

including the following:

Read all instructions before using the appliance.

■

Do not touch hot surfaces. Use handles or knobs.

■

■ To protect against fire, electric shock and personal injury

do not immerse cord, plugs, or appliance in water or other liquids.

The appliance is not intended for use by young children or

■

infirm persons without supervision.

Unplug from outlet when not in use and before cleaning.

■

Allow to cool before putting on or taking off parts, and before cleaning.

■ Do not operate any appliance with a damaged cord or

plug, or after appliance malfunctions or has been damaged in any manner. Return the appliance to the nearest authorized service center for examination, repair or adjustment.

follow instructions.

You

can be killed or seriously injured if you don't

instructions.

The use of accessory attachments not recommended by

■

the appliance manufacturer may result in ﬁre, electric shock, or personal injury.

■ Do not use outdoors.

■ Do not let cord hang over edge of table or counter, or

touch hot surfaces.

■ Do not place on or near a hot gas or electric burner, or in a

heated oven.

■ Always switch the appliance off, then plug cord into the

wall outlet. To disconnect, turn the appliance off, then remove plug from wall outlet.

■ Do not use appliance for other than intended use.

■ Use extreme caution when using hot steam.

■ Check hopper for presence of foreign objects before using.

SAVE THESE INSTRUCTIONS

PARTS AND FEATURES

PUSH

This manual covers several models. The coffee system you have purchased may have some or all of the items listed. The locations and appearances of the features shown here may not match those of your model.

Coffee System:

AC B

FGH

A. Beans container lid B. Pre-ground door C. Grinding adjustment dial D. Beans container E. Ground coffee funnel F. Infuser G. Coffee guide H. Service door I. Cup holder tray J. Coffee grounds container K. Drip tray L. Coffee spouts (adjustable height)

L M N

M. Lights to illuminate cup N. Hot water/steam connection nozzle O. Water tank P. Storage tray Q. Main ON/OFF switch R. Measure holder S. Cup warming ledge T. Power cord U. Lighting to illuminate interior

compartment V. Control panel W. On/standby button

Accessories:

A. "Total Hardness Test" indicator paper B. Ground coffee measure C. Cleaning brush

Milk and Accessories Container:

D. Hot water/steam spout E. Connection nozzle cover

A. Froth adjustment and CLEAN

function dial B. Lid release buttons C. Thermal casing

D. Milk container E. Milk intake tube F. Adjustable frothed milk spout G. Lid with milk frother

*Water lter not available on this model.

BEFORE USING THE COFFEE SYSTEM

NOTE: This product is intended for household use only. Coffee has been used to factory test the machine. It is completely

normal for there to be traces of coffee in the mill. Customize water hardness as soon as possible. See “Water

Hardness” in the “Settings” section. IMPORTANT: Complete the following steps before the coffee

system is used for the rst time.

1. INSERT WATER OUTLET: Check that the hot water/steam

spout is inserted on the connection nozzle.

A. Hot water and steam nozzle B. Hot water spout

2. Turn on the coffee system.

3. To select a language, press or until the ag

corresponding to the required language appears on the display, then press the ag.

4. FILL WATER TANK WITH FRESH WATER: Remove the water

tank, open the lid and ll to the MAX line with fresh water. Replace water tank.

5. Place a container with a minimum capacity of 1/2 cup (100 mL)

underneath. WATER CIRCUIT EMPTY PRESS OK TO START FILLING

PROCESS will show on display. Press

6. The coffee system will deliver fresh water from the spout then

turns off automatically. The coffee system is now ready for normal use.

NOTES:

■ When rst using the coffee system, you need to make

4-5 cappuccinos before the coffee system gives good results.

■ Before turning the coffee system on, make sure the main

switch is turned on. Each time the coffee system is turned on, it performs an automatic preheat and rinse cycle which cannot be interrupted. The coffee system is ready for use only after the cycle is complete.

to conrm.

A. Water tank

COFFEE SYSTEM USE

STOP

ESC

User 2 Size

A. Menu to customize beverages settings B. Appliance settings menu C. Selected strength D. Clock E. Selected size F. Strength selection

Espresso Coee

Settings

You can control several settings through the Settings Menu: Rinsing, Beep, Statistics, Cup Warmer, Water Hardness, Auto-Off, Coffee Temperature, Descaling, Auto-Start, Set Language, Set Time, Cup Lighting, Drink Settings, Energy Saving, Background, Demo Mode and Default Values.

To access the Settings Menu, press MENU. To exit the Settings Menu, press ESC.

Rinsing

Use this function to rinse the coffee spouts and preheat the brewing unit. Place a container with a minimum capacity of 1/2 cup (100 mL) under the coffee and hot water spouts.

1. Press to enter the menu.

2. Press or until the display shows RINSING.

3. Press to start rinsing.

4. After a few seconds, hot water will come out of the coffee

spout and RINSING HOT WATER RUNNING will be displayed.

5. To stop the rinsing cycle, press

stop automatically.

IMPORTANT: Do not leave the coffee system unattended while hot water is being delivered.

NOTES:

■ If the coffee system is not used for more than 3-4 days, we

strongly recommend doing 2-3 rinse cycles before use.

■ After rinsing, it is normal for some water to remain in the

grounds container.

or wait for rinsing to

00:00

Cappuccino Latte

G. Size selection H. Right scroll arrow I. Selectable drinks (press on the scrolling

arrows to see all the drinks) J. Left scroll arrow K. Customizable proles (see “Memorizing

Your Personal Prole”)

Beep

This function will enable or disable tones that sound when an icon is pressed or an accessory is inserted/removed.

1. Press to enter the menu.

2. Press or until the display shows BEEP.

3. Press to enable or disable the sound

notication. Press

Statistics

This function displays statistical data relating to the coffee system.

1. Press to enter the menu.

2. Press or until the display shows STATISTICS.

3. Press . It is possible to check all the available statistics by

pressing or . Press

Cup Warmer

Use to warm cups before making coffee.

1. Press to enter the menu.

2. Press or until the display shows CUP WARMER.

3. Press to active or deactivate the cup

warmer.

4. Press

Strength

macchiato

to return to the home page.

Water Hardness

ESC

Descaling

NOTE: The water hardness level is factory set at level 4. The

coffee system can be programmed according to the hardness of your fresh water so the coffee system can be descaled less.

1. Remove the "Total hardness test" indicator paper provided

from the packaging.

2. Immerse the paper completely in a glass of fresh water for

about a second.

3. Remove the paper and shake lightly. After a minute, 1, 2, 3, or

4 squares will form. Each square corresponds to one level.

4. Press to enter the menu. Press or until the display

shows WATER HARDNESS.

5. To change the level selected, press the symbol itself until the

required level is displayed (Level 1 = soft water, Level 4 = very hard water). Press

to return to the home page.

Auto-Off

Auto-off can be set so the coffee system turns off after 15 or 30 minutes, as well as 1-3 hours of no use.

1. Press to enter the menu.

2. Press or until the display shows AUTO-OFF together

with the current selection (15 or 30 minutes, 1, 2 or 3 hours).

3. Press to select the required value; then press

return to the homepage.

Coffee Temperature

IMPORTANT: Before using, read the instructions and labels on

the descaler packaging. Descale the appliance when the display shows DESCALING

NEEDED PRESS OK TO START (~45 min) . To descale immediately, press

and follow the steps.

1. "REMOVE WATER FILTER" will show on the display (if

present). Remove the water lter (if present) and empty the water tank. Press

2. ADD DESCALER (UP TO LEVEL A) AND FRESH WATER (UP

TO LEVEL B): Pour the descaler into the tank up to level A marked inside the water tank. This is equal to one 100 mL packet. Add 1 L (1 qt) fresh water up to level B and replace tank. Press

1. Press to enter the menu.

2. Press or until the display shows COFFEE

TEMPERATURE together with the current selection (LOW, MEDIUM, HIGH, or MAX).

3. Press to select the required temperature.

4. Press

to return to the home page.

A. Water tank

3. EMPTY GROUND CONTAINER AND DRIP TRAY: Remove,

empty and replace drip tray and the grounds container.

4. PLACE 2.5 L (3 qt) CONTAINER UNDER OUTLET, PRESS OK

TO START DESCALING: Place an empty 2.5 L (3 qt) or larger container under the hot water/steam spout and coffee spout.

5. Press

to conrm that descaling solution has been added. The display will show DESCALING PLEASE WAIT, which means the program has been started.

6. Descaler will come out of the hot water/steam and coffee

spouts. A series of rinses and pauses is automatically carried out to remove all scale residue from the inside the coffee maker.

7. After approx. 25 minutes, descaling will stop; RINSE AND

FILL WATER TANK UP TO MAX LEVEL will display. Empty the container used for descaler solution and place back under the spouts. Remove water tank, empty, rinse and rell to the MAX level and replace tank. Press

*Water lter not available on this model.

8. Display will show RINSING PLEASE WAIT and hot water will

ESC

empty from the spouts.

9. When the fresh water has run out, empty the container used

to collect the fresh water from the spouts.

10. INSERT FILTER INTO ITS HOUSING will be displayed.

Press

and remove the water tank. Reinsert the water

lter if it had been removed previously.

NOTE: Water lter not available on this model.

11. RINSE AND FILL WATER TANK UP TO MAX LEVEL will

display. Fill tank up to MAX level with fresh water. Next, INSERT WATER TANK will be displayed. Place the water tank back into the coffee system.

12. PLACE 2.5 L (3 qt) CONTAINER UNDER OUTLET PRESS

OK TO START RINSING: Place the empty container used to collect the descaling solution under the spouts and

press

. Hot water is dispensed and RINSING PLEASE

WAIT is displayed.

13. EMPTY DRIP TRAY: At the end of the rinsing cycle, remove,

empty and replace the drip tray, along with the grounds container. Replace and press

14. For a few seconds, DESCALE COMPLETE PRESS OK will be

displayed, then the coffee system will turn off. The descaling process is complete.

NOTE: If you would like to postpone the descaling process until a later time, press

. On the display the symbol will

remain as a reminder.

To access the descaling menu when ready:

1. Press to enter the menu.

2. Press or until the display shows DESCALE. Press

to start the descaling cycle. Follow the instructions on the display until cycle is complete.

Auto-Start

The auto-start time can be set to have the coffee maker ready at a certain time.

NOTE: To enable this function, the time must be set correctly. To set the time, see "Setting the Clock."

1. Press to enter the menu.

2. Press or until the display shows AUTO-START .

Select the function by pressing . The time setting panel will be displayed.

3. Press or corresponding to the hours and minutes until the

required auto-start time is displayed. Press or to enable or disable auto-start.

4. To conrm, press

page, press

. To cancel and return to the home

twice.

The auto-start is now set and the symbol will be displayed next to the time to indicate that the function has been enabled.

NOTE: When the coffee system is turned off using the main switch, the auto-start setting will be lost if it had been enabled.

Set Language

1. Press to enter the menu.

2. Press or until the display shows

Hola

3. Press

Bonjour

. Press or until the ag corresponding to the

Ciao

required language is shown and select it. Press to return to the home page.

Hola

Bonjour

SET LANGUAGE.

Ciao

twice

Set Time

1. Press to enter the menu.

2. Press or until the display shows SET TIME.

3. Press . The time setting panel will appear.

4. Press or corresponding to the hours and minutes until the

current time is displayed. To conrm, press press

, then press again to return to the home page.

. To cancel,

Cup Lighting

1. Press to enter the menu.

2. Press or until the display shows CUP LIGHTING.

3. Press to enable or disable the lights.

Press

to return to the home page.

Drink Settings

In this section, you can consult your customized settings and reset the default values for each beverage.

1. Press to enter the menu. Press or until DRINK

SETTINGS appears on the display.

2. The reference user prole is highlighted on the display. The

values are shown on the vertical bars. The manufacturer default value is indicated by the symbol while the current

set value is highlighted by the lled part of the vertical bar.

3. To go back to the settings menu, press

display the beverages, press

. To return to the default

. To scroll and

manufacturer values for the beverage shown on the display, press RESET. CONFIRM RESET will be displayed. To conrm, press

4. RETURN TO FACTORY will display. Press

. To cancel, press

The beverage has been reset to the default values. Continue with the other beverage, or go back to the settings menu.

NOTE: To change the beverages for another prole, go back to the homepage, select the required prole and repeat the procedure.

To reset all the beverages in the prole to the default values, see the "Default Values" section.

Energy Saving

Use this function to enable or disable energy saving mode. When enabled, the function guarantees reduced energy consumption. When it is disabled, warming time is reduced.

1. Press to enter the menu. Press or until ENERGY

SAVING appears on the display.

2. Press to enable or disable energy saving.

Press

to go back to the homepage.

Demo Mode

By using this setting, the main functions of the coffee system are shown on the display.

1. Press to enter the menu. Press or until the display

shows DEMO MODE. Press to start the demo.

2. To exit DEMO MODE, rst turn the coffee system off by

pressing the . Press the again to go back to the homepage.

Default Values

ESC

STOP

MYMYMY

This resets all menu settings and programmed quantities back to the default values (with the exception of the language which remains as set).

1. Press to enter the menu. Press or until the display

shows DEFAULT VALUES. Press .

2. Press RESET ALL to reset all proles to the original

parameters, otherwise select the required prole (e.g. User 1).

3. RETURN TO FACTORY SETTINGS? RESET ALL will display.

Press

4. FACTORY SETTINGS SET. Press

to conrm or

to leave settings unaltered.

to conrm.

Customizing Beverages

The strength and size of drinks can be customized.

1. The prole that is needed to be customized needs to be

active. A maximum of six proles are available on the unit. You can only select one prole to set at a time.

2. From the homepage, press MY . Choose the beverage you

wish to customize in order to access the customizing screen, The relative accessories must be inserted.

3. (Beverages with coffee only) CHOOSE COFFEE STRENGTH

LEVEL will display. Select the required strength by pressing

or and press

4. CUSTOMIZING COFFEE (OR FRESH WATER) SIZE, PRESS

STOP TO SAVE will display. Preparation begins and the coffee system displays the size customizing screen in the form of a vertical bar. The star alongside the bar represents the current size set.

5. When the amount reaches the minimum size you can set, the

display shows quantity in the cup is reached. SAVE NEW SETTINGS? will display. Press YES or NO.

6. The application conrms if the values have been saved or

not (depending on the previous selection). Press coffee system goes back to the home page.

NOTE: Milk based drinks; the coffee strength is saved rst, followed by the quantity of milk, then coffee.

. Press

when the required

. The

Selecting Coffee Strength

Select the required strength from the homepage by pressing

STRENGTH.

(See “Making Coffee using Pre-Ground Coffee”)

EXTRA LIGHT STRENGTH

LIGHT STRENGTH

MEDIUM STRENGTH

STRONG STRENGTH

EXTRA STRONG STRENGTH

CUSTOM STRENGTH (if programmed) / STANDARD STRENGTH

After delivering the beverage, the strength setting is reset to the

value.

Making Coffee or Espresso Using

Coffee Beans

IMPORTANT: Do not use green, caramelized or candied coffee beans as they could stick to the coffee mill and make it unusable.

1. Fill the beans container with coffee beans. Place a cup under

the coffee spout.

2. Lower the spout so that it is as near as possible to the cup.

This helps achieve a better cream.

Memorizing Your Personal Prole

The coffee system allows you to memorize six different proles, each associated with a different icon. In every prole the customized MY beverages STRENGTH and SIZE values are saved and the order in which all beverages are displayed is based on the frequency of selection.

To select or enter a prole, press on the prole currently in use, press or until the required prole is displayed, then press on the prole.

NOTE: Prole GUEST: Select this prole to deliver beverages with the default settings. The MY function is not active.

A. Coffee spout

3. Press or until the required coffee selection is displayed.

Then select your required coffee from the home page: Espresso, Doppio+, Coffee, Long, X2 Espresso or Americano.

4. Preparation begins and the display shows the image of

the selected beverage together with a progress bar which gradually lls as preparation proceeds.

NOTE: It is possible to prepare two cups of espresso coffee at

STOP

EXTRA

STOP

PUSH

the same time.

1. Press

during preparation of one espresso.

2. While the machine is making coffee, delivery can be

interrupted at any time by pressing

3. As soon as delivery has ended, to increase the quantity of

coffee in the cup, press reached, press

. Once the desired quantity is

4. Once the coffee has been made, the appliance is ready to

make the next beverage.

NOTE: Various messages may be displayed while using the appliance (FILL TANK, EMPTY GROUNDS CONTAINER, etc.). Their meanings are explained in section "Displayed messages."

■ For hotter coffee, see "Tips for Hotter Coffee" section.

■ If the coffee comes out in drops, too weak and not creamy

enough or too cold, see the "Adjusting the Coffee Mill" and "Troubleshooting" sections.

■ If "Energy Saving" mode is active, the rst coffee may take a

few seconds before it is delivered.

To Clean:

After every 14 cups of coffee made, the drip tray needs to be cleaned and the coffee grounds container emptied.

1. Open the service door on the front by pulling the coffee spout.

Selecting the Coffee Size

From the home page, select the required size of coffee in the cup by pressing SIZE.

SMALL SIZE

MEDIUM SIZE

LARGE SIZE

EXTRA LARGE SIZE

CUSTOM SIZE (if programmed) / STANDARD SIZE

After delivering the beverage, the size setting is reset to the

value.

Adjusting the Coffee Mill

The coffee mill is factory-set and should not require adjustment. However, if after making the rst few coffees you nd that the

coffee is either too weak and not creamy enough, or delivery is too slow (a drop at a time), this can be corrected by adjusting the grinding adjustment dial.

2. Remove the drip tray and clean it. NOTE: When cleaning the coffee system, always fully remove

the drip tray.

A. Grinding coarseness adjustment knob

NOTE: The grinding adjustment dial must only be turned when the coffee mill is in operation during the initial phase of coffee preparation.

1. If the coffee comes out too slowly or does not come out at

all, a message will be shown GROUND TOO FINE. ADJUST GRIND LEVEL, turn the coffee mill dial one or two clicks clockwise.

2. For fuller bodied creamier coffee, turn one click counter-

clockwise towards one. (Do not turn more than one click at a time. Otherwise the coffee could come out one drop at a time.)

A. Coffee grounds container B. Drip tray

3. Empty the coffee grounds container and replace it. NOTE: Every time the drip tray is removed, the coffee grounds

container must be emptied. Failure to do so may clog the coffee system.

4. Replace the drip tray and close the service door.

A. Counterclockwise for ner grind B. Clockwise for coarser grind

The effect of these adjustments will only be evident after at least two cups of coffee have been delivered. If this adjustment does not obtain the desired result, repeat the correction by turning the dial another click.

Making Coffee using Pre-Ground

STOP

EXTRA

STOP

Coffee

IMPORTANT:

■ Never add pre-ground coffee when the coffee maker is off in

order to avoid it spreading through the inside of the coffee maker and making it dirty. This could damage the appliance.

■ Never use more than one level measure or it could dirty the

inside of the coffee maker or block the funnel.

1. Press STRENGTH until the display shows (pre- ground).

2. Open the cover and the pre-ground door.

3. Make sure the funnel is not blocked, then add one level

measure of pre-ground coffee.

Making Milk-Based Hot Drinks

1. Remove the lid of the milk container.

2. Fill the container with approximately 1/2 cup (100 mL) of milk

for each cappuccino you want to make. Do not ll above the MAX line on the milk container. For a denser or more even froth, use cold skim or partially skim milk.

3. Make sure the milk intake tube is correctly inserted in the

bottom of the milk container lid and place the lid back onto the container.

A. Center funnel

4. Place a cup under the coffee spouts, then select your required coffee from the home page.

5. Preparation begins and the image of the selected beverage appears on the display, together with a progress bar which gradually lls as preparation progresses.

NOTES:

■ If you use pre-ground coffee, you can only make one cup of

coffee at a time.

■ While the coffee maker is making coffee, delivery can be

interrupted at any time by pressing

■ As soon as delivery has ended, to increase the quantity of

coffee in the cup, press reached, press

■ Once the coffee has been made, the appliance is ready to

make the next beverage.

. Once the desired quantity is

A. Milk intake tube B. Rubber washer

4. Remove the hot water/steam spout.

ESC

STOP

EXTRA

Adjusting the Amount of Froth

Turn the froth adjustment dial on the milk container to adjust the amount of froth on the milk delivered while making the drinks. See table below.

A. Hot water and steam nozzle B. Hot water spout

5. Attach the milk container to the nozzle by pushing the bottom of the container. A tone will sound if the sound notication is enabled.

A. Hot water and steam nozzle B. Milk container

6. Place a large cup under the coffee spouts and frothed milk spout. To move the spout nearer to the cup, simply pull it downward.

DIAL

DESCRIPTION RECOMMENDED FOR...

POSITION

No froth CAFFE LATTE / MILK (hot milk)

Min. froth LATTE MACCHIATO

Max. froth CAPPUCCINO / MILK (frothed

milk)

Making Milk-Based Drinks Automatically

1. Fill the milk container and attach it as described above.

2. Select the required beverage from the home page:

Cappuccino, Latte Macchiato, Caffe Latte, Hot Milk, Cappuccino+, Espresso Macchiato, Flat White or Cappuccino Mix.

3. On the display the coffee maker recommends turning the

foam adjustment dial based on the foam requirements for the original recipe. Turn the dial on top of the milk container lid

and conrm the selection by pressing

4. After a few seconds, preparation begins automatically

and an image of the selected beverage appears on the display, together with a progress bar which gradually lls as preparation progresses.

5. Once the coffee has been made, the coffee maker is ready to

make the next beverage.

NOTES:

■ If "Energy Saving" mode is enabled, there may be a few

seconds delay before the beverage is delivered.

■ Press

to interrupt preparation completely and go back

to the home page.

■ Press

to interrupt milk or coffee delivery and move on

to the next delivery (if applicable) to complete the beverage.

■ At the end of delivery, to increase the quantity of coffee in the

cup, press

■ Preparation of each milk based drink can be customized.

See "Customizing Beverages" and Memorizing Your Personal Prole" sections.

■ Do not leave the milk container out of the refrigerator for more

than 15 minutes. The quality of the foam will decrease the longer the container is out.

A B

A. Coffee spouts B. Milk spout C. Cup

To Clean Hot Water/Steam Spout:

STOP

PUSH

Always clean the hot water/steam spout after use to avoid the build-up of milk residues and prevent it from clogging.

1. Place a container under the hot water/steam spout and let a little fresh water out. See "Delivering Hot Water" section. Stop delivery by pressing

2. Wait a few minutes for the hot water/steam spout to cool down. When cool, remove the spout. Hold the spout steady with one hand and with the other, turn and detach the cappuccino maker, pulling it downwards.

A. Hot water/steam spout

3. Also remove the steam connection nozzle by pulling it downward. Check that the hole in the connection nozzle is not blocked. If necessary, clean using a toothpick.

4. Wash all parts of the spout thoroughly with a sponge and warm water. Attach the connection nozzle and the cappuccino maker onto the spout by pushing it upwards and turning it clockwise until it is secure.

Delivering Hot Water

1. Make sure the hot water/steam spout is attached correctly to

the hot water/steam connection nozzle.

2. Place a container under the spout as close as possible to

avoid splashes.

3. Select HOT WATER from the home page. The

corresponding image appears on the display, together with a progress bar which lls gradually as preparation proceeds.

4. The machine delivers hot water, then the delivery stops

automatically. To interrupt hot water delivery manually, press

NOTES:

■ If "Energy Saving" mode is active, there may be a few seconds

delay before hot water is delivered.

■ Preparation of hot water can be customized. See "Customizing

Beverages" and "Memorizing Your Personal Prole" sections.

Steam Delivery

1. Make sure the hot water/steam spout is attached correctly to

the hot water/steam connection nozzle. Fill a container with the liquid to be heated or frothed and immerse the hot water/ steam spout in the liquid.

2. Select STEAM from the homepage. The corresponding

image appears on the display, together with a progress bar which lls gradually as preparation proceeds and after a few seconds, steam to heat the liquid is delivered from the hot water/steam spout.

3. When the required temperature or level of froth is reached,

interrupt steam delivery by pressing

Tips for using steam to froth milk:

■ When choosing the size of the container, bear in mind that the

liquid doubles or triples in volume.

■ For a richer, denser froth, use skimmed or partially skimmed

milk at refrigerator temperature.

■ For a creamier froth, rotate the container with a slow

movements in a upward motion.

■ To avoid milk with poor froth or large bubbles, always clean

the spout.

COFFEE SYSTEM CARE

To avoid damage to the coffee system, do not use solvents or abrasive detergents to clean the coffee system. Use a soft damp cloth to clean the exterior of the coffee system. Clean all machine parts regularly.

IMPORTANT: Before any cleaning, turn the coffee system off using the main On/Off switch and unplug it.

IMPORTANT: Do not immerse the coffee system in water.

Cleaning the Coffee Grounds Container and Drip Tray

When the display shows the message EMPTY GROUNDS CONTAINER, the grounds container must be emptied and cleaned. The appliance cannot be used to make coffee until the container is has been cleaned. Even if it is not full, the empty grounds container message is displayed 72 hours after the rst coffee has been prepared. For the 72 hours to be calculated correctly, the machine must never be turned off with the main switch.

General Cleaning

1. Open the bottom door by rotating it downwards and open.

2. Remove drip tray, empty and clean it.

PUSH

3. Empty and clean the coffee grounds container making sure to remove all the residue that can be deposited on the bottom. The brush provided features a spatula especially for this job.

IMPORTANT: Every time the drip tray is removed, the coffee grounds container must be emptied. If this is not done, the grounds container may ll up more than expected and clog the coffee system.

The drip tray has a gray oat as a water level indicator. Empty and clean the drip tray before the red oat protrudes from the cup tray. If the drip tray is not emptied, the water can overow and damage the coffee system.

1. Open the door and remove the drip tray and coffee grounds container.

Cleaning the Infuser

IMPORTANT: The infuser must not be removed when the

appliance is on. Do not use force to remove the infuser.

1. Make sure the machine is correctly turned off.

2. Open the service door.

3. Remove the drip tray and grounds coffee container.

A. Coffee grounds container B. Drip tray

2. Empty the drip tray and grounds container and wash them.

3. Replace the drip tray complete with grounds container.

Cleaning the Water Tank

Clean the water tank regularly with a damp cloth and a small amount of mild detergent. Rinse thoroughly before lling the tank and putting it back in the appliance.

Cleaning the Coffee Spouts

Clean the coffee spouts regularly with a sponge or cloth. Check that the holes in the coffee spouts are not blocked. If necessary, remove coffee deposits with a toothpick.

Cleaning the Pre-Ground Coffee Funnel

Check regularly that the pre-ground coffee funnel is not blocked. Remove coffee deposits with the brush supplied, if needed.

Cleaning the Inside

Check the inside of the coffee system approximately once a week for dirt and debris. If necessary, remove coffee deposits with the supplied brush and a damp sponge or cloth.

A. Coffee grounds container B. Drip tray

4. Press the two colored release buttons inwards and at the

same time pull the infuser outwards.

PUSH

A. Release buttons B. Infuser unit

+ 33 hidden pages