Jenn-Air JIC4536X User Manual
JENN-AIR® DETAILED PLANNING DIMENSIONS
A
A
B
A
C
F
D
G
B
E
36" INDUCTION COOkTOP
JIC4536X – 361⁄4" x 41⁄8" x 213⁄8"
PRODUCT DIMENSIONS
MODEL # JIC4536X
Overall width 36
A
Overall depth 21
B
Width of recessed cooktop 32
C
Height of recessed cooktop 3
D
Recessed height including front flange 3
E
Height of cooking surface
Euro-Style Stainless (including trim)
F
Floating Glass
Depth of recessed cooktop 18
G
Recessed height including electrical conduit 4
H
TOP VIEW
B
F
D
E
1 of 4
in cm
1
⁄4 92.2
3
⁄8 54.1
1
⁄2 82.6
1
⁄8 8.0
7
⁄8 9.8
1
⁄4 0.6
1
⁄8 0.4
7
⁄8 47.9
1
⁄8 10.5
FRONT VIEW
SIDE VIEW
C
B
H
Product dimension, cutout and installation specifications are provided for planning purposes only. Before installing
any product, be sure to verify cutout dimensions and electrical/gas connections as actual product dimensions may vary.
JRC120028A 07/2012
JENN-AIR® DETAILED PLANNING DIMENSIONS
D*
E
C
e
BB
G
A
F
H
BB
I
Side
Cabinet
36" INDUCTION COOkTOP
JIC4536X – 361⁄4" x 41⁄8" x 213⁄8"
OPENING/CLEARANCE DIMENSIONS
MODEL # JIC4536X
Width of combustible area above
A
cooking surface (min.)
Width from cooktop to fixed wall
B
or other combustible material (min.)
Width to outer edge of outlet (min.) 10 25.4
C
Height to bottom of uncovered wood or
D*
metal cabinet above cooking surface (min.)
Height to bottom of uncovered wood
E
or metal cabinet (min.)
Required height of ventilation opening in
front cabinet under countertop for proper
F
ventilation – full width of cooktop
Height to top edge of outlet (min.) 12 30.5
G
Depth of upper cabinet (recommended) 13 33.0
H
Depth from cutout to wall (min.) 1 2.5
I
Width of cutout 33
J
Depth of cutout 19
K
Depth from cutout to front of countertop 2 5.1
L
e
Recommended electrical access location
* Dimension can be reduced by 6" (15.2 cm) when bottom of wood or metal cabinet
is covered by not less than
less than No. 28 MSG sheet metal, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm)
aluminum or 0.020" (0.5 mm) copper.
If installing a hood or microwave hood combination above the cooktop, follow the
hood or microwave hood combination instructions for dimensional clearances above
the cooking surface.
ELECTRICAL REQUIREMENTS
240 volt, 60 Hz, AC only, 50-amp fused, grounded circuit is required.
A dedicated circuit is recommended. The length of conduit provided is
for serviceability to the cooktop.
LOCATION REQUIREMENTS
• To ensure cooktop base clearance, cabinet side walls need to be wider
than the cutout.
• If cabinet has a drawer, allow a 51⁄8" (13.0 cm) minimum clearance
between countertop and top of drawer.
COOKTOP OVER SINGLE WALL OVEN INSTALLATION
REQUIREMENTS
• For approved model number combinations, refer to the under counter
label on the bottom of the cooktop burner box.
• To install a cooktop over a single wall oven, refer to page 3.
FRONT VIEW
D*
Side
Cabinet
H
A
E
F
G
e
C
I
2 of 4
in cm
1
33
⁄8 84.0
1 2.5
30 76.2
18 45.7
3
⁄16 0.5
1
⁄8 84.0
1
⁄4 49.0
1
⁄4" (0.6 cm) flame retardant millboard covered with not
J
SIDE VIEW
Product dimension, cutout and installation specifications are provided for planning purposes only. Before installing
any product, be sure to verify cutout dimensions and electrical/gas connections as actual product dimensions may vary.
TOP VIEW – CUTOUT
I
K
L
JRC120028A 07/2012
Loading...