JIC4430XS
JENN-AIR
®
30" AND 36" (76.2 CM AND 91.4 CM)
TOUCH-ACTIVATED ELECTRONIC
INDUCTION COOKTOP
TABLE DE CUISSON PAR INDUCTION AVEC
COMMANDES ÉLECTRONIQUES TACTILES JENN-AIR
®
DE 30" ET 36" (76,2 CM ET 91,4 CM)
Use & Care Guide
For questions about features, operation/performance, parts, accessories, or service in the U.S.A., call:
1-800-JENNAIR (1-800-536-6247), or visit our website at www.jennair.com.
In Canada, call: 1-800-807-6777, or visit our website at www.jennair.ca.
Guide d’utilisation et d’entretien
Au Canada, pour assistance, installation ou service, composez le 1-800-807-6777 ou visitez notre site web à www.jennair.ca.
Table of Contents/Table des matières................... 2
501961901382B
IMPORTANT: READ AND SAVE THESE INSTRUCTIONS.
FOR RESIDENTIAL USE ONLY.
IMPORTANT : LIRE ET CONSERVER CES INSTRUCTIONS.
POUR UTILISATION RÉSIDENTIELLE UNIQUEMENT.
2
TABLE OF CONTENTS
COOKTOP SAFETY........................................................................2
COOKTOP USE ..............................................................................4
Induction Cooking........................................................................5
Cooktop Controls.........................................................................5
Dual Size Surface Cooking Area..................................................7
Sensor Boil ...................................................................................7
Low Settings.................................................................................8
Simmer .........................................................................................8
Melt...............................................................................................8
Keep Warm...................................................................................8
Bridge ........................................................................................... 8
Pan Detection...............................................................................9
Control Lock................................................................................. 9
Performance Boost Function.......................................................9
Timer...........................................................................................10
Tones..........................................................................................10
Ceramic Glass............................................................................10
Cookware ...................................................................................10
COOKTOP CARE..........................................................................11
General Cleaning........................................................................11
TROUBLESHOOTING ..................................................................12
ASSISTANCE OR SERVICE.........................................................13
WARRANTY ..................................................................................14
TABLE DES MATIÈRES
SÉCURITÉ DE LA TABLE DE CUISSON ....................................15
UTILISATION DE LA TABLE DE CUISSON................................17
Cuisson par induction ................................................................18
Commandes de la table de cuisson ..........................................18
Surface de cuisson à dimension double....................................20
Ébullition avec capteur...............................................................20
Réglages de chaleur réduite ......................................................21
Mijotage......................................................................................21
Faire fondre ................................................................................21
Maintien au chaud......................................................................21
Liaison ........................................................................................22
Détection d'un plat.....................................................................22
Verrouillage des commandes.....................................................22
Fonction d'optimisation du rendement......................................22
Minuterie.....................................................................................23
Signaux sonores.........................................................................23
Vitrocéramique ...........................................................................23
Ustensiles de cuisson ................................................................24
ENTRETIEN DE LA TABLE DE CUISSON ..................................24
Nettoyage général ......................................................................24
DÉPANNAGE.................................................................................25
ASSISTANCE OU SERVICE.........................................................26
GARANTIE.....................................................................................27
COOKTOP SAFETY
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't
follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
3
This induction cooktop generates and uses ISM frequency energy that heats cookware by using an electromagnetic field. It has been
tested and complies with Part 18 of the FCC Rules for ISM equipment. This induction cooktop meets the FCC requirements to minimize
interference with other devices in residential installation.
This induction cooktop may cause interference with television or radio reception. If interference occurs, the user should try to correct
the interference by:
Relocating the receiving antenna of the radio or television.
Increasing the distance between the cooktop and the receiver.
Connecting the receiver into a different outlet.
It is the user’s responsibility to correct any interference.
NOTE: People with a pacemaker or similar medical device should use care when standing near this induction cooktop while it is on. The
electromagnetic field may affect the pacemaker or similar device. Consult your doctor, or the manufacturer of the pacemaker or similar
medical device for additional information about its effects with electromagnetic fields of the induction cooktop.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the cooktop, follow
basic precautions, including the following:
■ CAUTION: Do not store items of interest to children in
cabinets above a cooktop – Children climbing on the
cooktop to reach items could be seriously injured.
■ Proper Installation – Be sure your cooktop is properly
installed and grounded by a qualified technician.
■ Never Use Your Cooktop for Warming or Heating the
Room.
■ Do Not Leave Children Alone – Children should not be left
alone or unattended in area where cooktop is in use. They
should never be allowed to sit or stand on any part of the
cooktop.
■ Wear Proper Apparel – Loose-fitting or hanging garments
should never be worn while using the cooktop.
■ User Servicing – Do not repair or replace any part of the
cooktop unless specifically recommended in the manual. All
other servicing should be referred to a qualified technician.
■ Storage on Cooktop – Flammable materials should not be
stored near surface units.
■ Do Not Use Water on Grease Fires – Smother fire or flame
or use dry chemical or foam-type extinguisher.
■ Use Only Dry Potholders – Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let
potholder touch hot heating elements. Do not use a towel
or other bulky cloth.
■ DO NOT TOUCH SURFACE UNITS OR AREAS NEAR
UNITS – Surface units may be hot even though they are
dark in color. Areas near surface units may become hot
enough to cause burns. During and after use, do not touch,
or let clothing or other flammable materials contact surface
units or areas near units until they have had sufficient time
to cool. Among those areas are the cooktop and surfaces
facing the cooktop.
■ Use Proper Pan Size – This cooktop is equipped with one
or more surface units of different size. Select utensils
having flat bottoms large enough to cover the surface unit
heating element. The use of undersized utensils will
expose a portion of the heating element to direct contact
and may result in ignition of clothing. Proper relationship of
utensil to burner will also improve efficiency.
■ Never Leave Surface Units Unattended at High Heat
Settings – Boilover causes smoking and greasy spillovers
that may ignite.
■ Glazed Cooking Utensils – Only certain types of glass,
glass/ceramic, ceramic, earthenware, or other glazed
utensils are suitable for cooktop service without breaking
due to the sudden change in temperature.
■ Utensil Handles Should Be Turned Inward and Not Extend
Over Adjacent Surface Units – To reduce the risk of burns,
ignition of flammable materials, and spillage due to
unintentional contact with the utensil, the handle of a
utensil should be positioned so that it is turned inward, and
does not extend over adjacent surface units.
■ Do Not Cook on Broken Cooktop – If cooktop should
break, cleaning solutions and spillovers may penetrate the
broken cooktop and create a risk of electric shock. Contact
a qualified technician immediately.
■ Clean Cooktop With Caution – If a wet sponge or cloth is
used to wipe spills on a hot cooking area, be careful to
avoid steam burn. Some cleaners can produce noxious
fumes if applied to a hot surface.
For units with ventilating hood –
■ Clean Ventilating Hoods Frequently – Grease should not
be allowed to accumulate on hood or filter.
■ When flaming foods under the hood, turn the fan on.
For units with coil elements –
■ Make Sure Reflector Pans or Drip Bowls Are in
Place – Absence of these pans or bowls during
cooking may subject wiring or components
underneath to damage.
■ Protective Liners – Do not use aluminum foil to line surface
unit drip bowls, except as suggested in the manual.
Improper installation of these liners may result in a risk of
electric shock, or fire.
■ Do Not Soak Removable Heating Elements - Heating
elements should never be immersed in water.
4
COOKTOP USE
This manual covers different models. The cooktop you have purchased may have some or all of the features listed.
30" (76.2 cm) Model JIC4430X
A. Left rear surface cooking area display
B. Surface cooking area off
C. Heat level display
D. Right rear surface cooking area display
E. Power on/off
F. Low settings
G. Sensor Boil
H. Left front surface cooking area display
I. Timer display
J. Timer (increase/decrease)
K. Heat level slider
L. Right front surface cooking area display
M. Left side bridge
N. Control lock
D
C
A
B
N
M
K
J
IGFE
H
L
5
36" (91.4 cm) Model JIC4536X
Induction Cooking
Induction cooking is quite different from traditional forms of
cooking. The heat is generated directly in the pan, keeping the
cooking surface cooler than a traditional element.
Induction cooking does not lose as much heat as traditional
forms because all the heat is created in the pan itself.
The cooktop heats up or cools down quickly after the controls
are set. It also stops heating when the pan is removed without
turning off the power.
Food spilled on the cooktop surface will not burn because the
glass is not heated. Induction cooking allows for immediate
cleaning after use because the heat is created in the pan.
Pan size, material (see “Cookware” section), and positioning is
very important to achieve maximum wattage.
The diameter of the pan’s base should be equal to the size of the
element.
If the pan is too small, the burner does not sense the pan and will
not activate.
Cooktop Controls
The touch-activated electronic controls offer a variety of heat
settings for optimal cooking results. When melting foods such as
chocolate or butter, the surface cooking area can be set to the
Melt function for minimal cooking power.
For maximum surface cooking power, all cooktop touch-
activated electronic controls can be set to Performance Boost
function when bringing liquids to a fast and rapid boil. Touch
BOOST to immediately reach the highest setting.
NOTE: This cooktop will also work with a 208V operation where
240V installation is not available.
A. Left rear surface cooking area display
B. Surface cooking area off
C. Center surface cooking area display
D. Heat level display
E. Right rear surface cooking area display
F. Power on/off
G. Low settings
H. Sensor Boil
I. Left front surface cooking area display
J. Timer display
K. Timer (increase/decrease)
L. Heat level slider
M. Right front surface cooking area display
N. Left side bridge
O. Right side bridge
P. Control lock
A
B
D
E
PONML
K
JIHGF
C
WARNING
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
6
First use or after a power failure:
After connecting the cooktop to an electrical power supply or
after a power failure, the control panel will be locked. An indicator
light above the key icon will be on. To unlock the control panel,
press and hold CONTROL LOCK for 3 seconds. The indicator
light will turn off, and the cooktop is ready for use.
To Use
To Turn On the Cooktop:
1. Press POWER.
The indicator light above the Power keypad and a dash (“-”)
in each surface cooking area will light to indicate that each
surface cooking area is ready to be activated.
Inactivity for 1 minute after the main power has been turned
on will automatically turn off the power to the cooktop.
If a cooking function or the power slider are touched without
first selecting a surface cooking area, all dashes (one for each
zone) will flash and an invalid tone will sound 3 times.
To Turn On a Surface Cooking Area:
1. Touch directly on the display area for the surface cooking
area you want to use.
The current power level and indicator light will flash for
10 seconds then remain on.
Touching any other feature or the power slider stops the
flashing and information for the keypad that was touched will
be displayed.
When a surface cooking area is selected, the timer will also
turn on to show that it can now be set.
When a surface cooking area is left at the “0” power level for
1 minute, the surface cooking area will automatically turn off
and display only the middle dash without the indicator light.
2. Select a heat setting from 1 - 9 by touching/sliding on the
power slider. The heat setting will appear in the surface
cooking area display.
The power slider consists of 9 positions plus a “Boost”
position. When the user slides to 0, “0” will be displayed. The
surface cooking area will not turn on but remains active/
selected.
When a surface cooking area is left at the “0” power level for
1 minute, the zone will automatically turn off and display only
the middle dash without the indicator light.
Use the following chart as a guide when setting heat levels.
To Tu rn Off :
1. Touch ON/OFF to turn off desired surface cooking area,
1 tone will sound when Off is pressed.
2. Touch POWER to turn off the cooktop when finished.
Hot Surface Indicator
An “H” will appear in the heat setting display as long as any
surface cooking area is too hot to touch, even after the surface
cooking area(s) is turned off.
Dual Size Surface Cooking Area
(on some models)
The dual size surface cooking area offers flexibility to cook using
different sizes of cookware. Single size can be used in the same
way as a regular surface cooking area. The dual size combines
inner and outer surface cooking areas and is recommended for
larger cookware, large quantities of food, and home canning.
The dual size surface cooking area contains two cooking areas.
If the size of the pan is the same as the single size surface
cooking area, the cooking area will work as a single size cooking
area.
If the pan is slightly larger than the single size cooking area, it
may activate only part of the dual size cooking area. This will
result in the burner being less efficient and will increase the
heating time.
If the size of the pan is the same as the dual size surface cooking
area, the dual size cooking area will activate automatically.
SETTING RECOMMENDED USE
9 - Boost
■ Bring liquid to a boil.
9
■ Start food cooking.
7 - 8
■ Quickly brown or sear food.
6 - 7 ■ Hold a rapid boil.
5 - 6
■ Fry or saute foods.
■ Cook soups, sauces and
gravies.
4 - 5
■ Maintain a slow boil.
■ Stew or steam food.
3 - 5 ■ Range of simmer levels for
simmering with or without a lid.
Melt
■ Melt chocolate or butter.
Simmer
■ Simmer sauces.
Keep Warm ■ Keep cooked foods warm.
Dual surface cooking
area
■ Home canning.
■ Large-diameter cookware.
■ Large quantities of food.
A. Heat setting display
B. Hot surface indicator “H”
A. Single size
B. Dual size
SETTING RECOMMENDED USE
A
B
A
B
7
Sensor Boil
The Sensor Boil function automatically selects the ideal power
level to boil water and has an audible beep when boiling is
reached. Sensor Boil is available only on one surface cooking
area. See the following illustrations for which surface cooking
area has Sensor Boil for your cooktop.
30” (76.2 cm) Model JIC4430X
36” (91.4 cm) Model JIC4536X
When using Sensor Boil:
■ Use only water at room temperature.
■ Do not add salt or any other ingredients to water until boiling
is reached.
■ Do not use a lid on a pot while using the Sensor Boil function.
■ Do not use the Sensor Boil function if the surface cooking
area is hot. “H” will appear in the display when the surface
cooking area is hot.
■ Do not change the power level or move the pot.
■ Fill the pot at least one-third of the way full with at least
4 cups (946 mL) of water but not up to the brim. Do not use
Sensor Boil with more than approximately 5 qt (5 L) for
36" (91.4 cm) models, or 7 qt (7 L) for 30" (76.2 cm) models.
■ For best results, use pots with a diameter between
9½" (24 cm) and 11" (28 cm) for 30" (76.2 cm) models. Use
pots with a diameter between 6½" (17 cm) and 7½" (19 cm)
for 36" (91.4 cm) models.
■ Do not use pressure cookers.
■ The quality of the cookware being used may affect the
performance of the Sensor Boil function.
To Use :
To Tu rn On :
1. Check that the surface cooking area with available Sensor
Boil has been selected.
2. Put the pot on the selected surface cooking area for sensor
boiling.
3. Touch SENSOR BOIL. “A” will appear in the display, and the
indicator light next to Sensor Boil will light.
When the boiling point is reached, the cooktop will beep
3 times at regular intervals. After the second set of beeps, a
minute counter will start counting the boiling time
automatically. After the third set of beeps, the cooktop will
automatically switch to a lower power level suitable to
maintain the boil.
To Tu rn Off :
Sensor Boil can be turned off in 3 different ways:
1. Use the power slider to set to a heat level.
OR
2. Touch the surface cooking area OFF keypad.
OR
3. Select a different cooking function.
NOTE: The cooktop manages the Sensor Boil and Performance
Boost functions automatically. In some cases, it may not be able
to use the Sensor Boil and Performance Boost functions
simultaneously.
Low Settings
The Low Settings function can be used with all surface cooking
areas. Low Settings can be used on more than 1 surface cooking
area at a time.
The Low Settings function allows you to select the Simmer, Melt
or Keep Warm functions for a specific surface cooking area.
To Use
To Tu rn On :
1. Check that a surface cooking area has been selected.
2. Touch LOW SETTINGS. “A” will appear in the display for the
surface cooking area selected.
3. Press LOW SETTINGS until an indicator light next to the
desired function is lit.
The timer remains visible and can be set if desired.
To Tu rn Off :
Low Settings can be turned off in 3 different ways:
1. Use the power slider to set to a heat level.
OR
2. Touch the surface cooking area OFF keypad.
OR
3. Select a different cooking function.
A. Surface cooking area with available Sensor Boil
A. Surface cooking area with available Sensor Boil
A
A
8
Simmer
The Simmer function can be used with all surface cooking areas.
Simmer can be used on more than 1 surface cooking area at a
time.
To Use :
To Tu rn On :
1. Check that a surface cooking area has been selected.
2. Touch SIMMER. “A” will appear in the display, and the
indicator light next to Simmer will light.
The timer remains visible and can be set if desired.
To Tu rn Off :
Simmer can be turned off in 3 different ways:
1. Use the power slider to set to a heat level.
OR
2. Touch the surface cooking area OFF keypad.
OR
3. Select a different cooking function.
Melt
The Melt + Hold function can be used with all surface cooking
areas. Melt + Hold can be used on more than 1 surface cooking
area at a time.
To Use
To Tu rn On :
1. Check that a surface cooking area has been selected.
2. Touch MELT + HOLD. “A” will appear in the display, and the
indicator light next to Melt + Hold will light.
The timer remains visible and can be set if desired.
To Tu rn Off :
Melt + Hold can be turned off in 3 different ways:
1. Use the power slider to set to a heat level.
OR
2. Touch the surface cooking area OFF keypad.
OR
3. Select a different cooking function.
Keep Warm
The Keep Warm function can be used with all surface cooking
areas. Keep Warm can be used on more than 1 surface cooking
area at a time. Keep warm is not recommended for heating cold
foods.
To Use
To Tu rn On :
1. Check that a surface cooking area has been selected.
2. Touch KEEP WARM. “A” will appear in the display, and the
indicator light next to Keep Warm will light.
The timer remains visible and can be set if desired.
To Tu rn Off :
Keep Warm can be turned off in 3 different ways:
1. Use the power slider to set to a heat level.
OR
2. Touch the surface cooking area OFF keypad.
OR
3. Select a different cooking function.
Bridge
(on some models)
The Bridge function can be activated when surface cooking areas
are on or when they are off. The Bridge function allows you to use
2 cooking zones as an extra-large cooking zone.
To Tu rn On a B ri dg e:
1. Touch the desired Bridge keypad (left side bridge or right side
bridge).
The indicator light above the Bridge keypad will light. The
heat setting levels for the 2 surface cooking areas will default
to “0” and can be set from a minimum of “1” to a maximum of
“9.” Any timers that may be running for the 2 surface cooking
areas will turn off, and 2 dashes “--” will appear in the timer
display.
2. Slide a finger on the Heat Level Slider to change the power
level up or down.
The selected heat level will show in the heat level display for
each surface cooking area using the bridge.
A. Left side bridge
B. Right side bridge
WARNING
Food Poisoning Hazard
Do not let food sit for more than one hour before or
after cooking.
Doing so can result in food poisoning or sickness.
A
B
9
To Tu rn Off a Bridge :
1. Touch the Bridge keypad for the zone being used (left side
bridge or right side bridge).
The surface cooking areas will resume operation as 2
separate areas.
NOTE: Performance Boost cannot be used on the same
elements in combination when the Bridge function.
Pan Detection
If the system cannot recognize the pan, or if the pan has been
removed from the surface cooking area, the “replace pan”
animation appears in the cooking area display as a reminder. See
the following illustration.
If the pan is not placed within 30 seconds, the zone(s) will switch
Off.
If a Timer is running when a pan is removed, the countdown will
continue.
Control Lock
The Control Lock avoids unintended use of the surface cooking
areas.
If Control Lock is activated when power to the cooktop is off, the
cooktop is locked out, and the surface cooking areas cannot be
turned on by the cooktop touch controls.
If Control Lock is activated when power to the cooktop is on, all
keypads are locked out except for the Power and On/Off
keypads.
To Lock Cooktop:
Touch and hold the CONTROL LOCK keypad for 3 seconds. After
3 seconds, a tone will sound and the indicator light above the
Control Lock keypad will light, indicating that the cooktop
controls are in the lockout position.
If the cooktop is in use when Control Lock is activated, cooking
will proceed as normal and any timers that have been set will
continue their countdown.
To Unlock Cooktop:
Touch and hold the CONTROL LOCK keypad for 3 seconds.
Performance Boost Function
This function allows you to increase the heat setting level above
the maximum heat setting 9 for 10 minutes or less.
NOTE: Performance Boost is not available when the Bridge
function is activated.
30” (76.2 cm) Model JIC4430X
Performance Boost function is available on only 1 surface
cooking area at a time within a zone. If you attempt to use
another surface cooking area in the same zone, “P” and “9” will
briefly flash in the display before returning to heat setting level 9.
The surface cooking area that was set to the Performance boost
function will automatically reset to heat setting level 9. See the
following illustrations for zones.
36” (91.4 cm) Model JIC4536X
Performance Boost function is available on all surface cooking
areas at the same time within a zone. See the following
illustrations for zones.
Zone 1 Zone 2
A. Surface cooking
area 1
B. Surface cooking
area 2
C. Surface cooking area 3
D. Surface cooking area 4
Zone 1 Zone 2 Zone 3
A. Surface cooking
area 1
B. Surface cooking
area 2
C. Surface cooking
area 3, dual
element with
5000W
performance
boost
D. Surface cooking
area 4
E. Surface cooking
area 5
A
D
B
C
C
A
B
D
E
Loading...