Jenn-Air JIC4430XS User Manual
JENN-AIR® DETAILED PLANNING DIMENSIONS
A
B
G
A
C
F
D
B
E
30" INDUCTION COOKTOP
JIC4430X – 305⁄16" x 41⁄8" x 215⁄16"
PRODUCT DIMENSIONS
1 of 2
TOP VIEW
FRONT VIEW
A
MODEL # JIC4430X
in cm
Overall width 305⁄16 77.0
A
Overall depth 215⁄16 54.1
B
B
Width of recessed cooktop 29 73.4
C
Height of recessed cooktop 31⁄8 8.0
D
Recessed height including front flange 37⁄8 9.8
E
Height of cooking surface
Euro-Style Stainless (including trim)
F
Floating Glass
Depth of recessed cooktop 187⁄8 47.9
G
Recessed height including electrical conduit 41⁄8 10.5
H
1
⁄4 0.6
1
⁄8 0.4
F
E
D
C
SIDE VIEW
B
H
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide
before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
86 40dZ w1215
JENN-AIR® DETAILED PLANNING DIMENSIONS
D*
H
E
C
e
BB
G
I
Side
Cabinet
A
F
H
BB
I
Side
Cabinet
30" INDUCTION COOKTOP
JIC4430X – 305⁄16" x 41⁄8" x 215⁄16"
2 of 2
OPENING/CLEARANCE DIMENSIONS
A
D*
G
e
C
FRONT VIEW
Side
Cabinet
F
MODEL # JIC4430X
in cm
Width of combustible area above
A
cooking surface (min.)
Width from cooktop to fixed wall
B
or other combustible material (min.)
Width to outer edge of outlet (min.) 10 25.4
C
Height to bottom of uncovered wood or
D*
metal cabinet above cooking surface (min.)
Height to bottom of uncovered wood
E
E
or metal cabinet (min.)
291⁄2 75.0
1 2.5
30 76.2
18 45.7
Required height of ventilation opening in front
cabinet under countertop for proper ventilation
F
3
⁄16 0.5
– full width of cooktop
Height to top edge of outlet (min.) 12 30.5
G
Depth of upper cabinet (recommended) 13 33.0
H
Depth from cutout to wall (min.) 1 2.5
I
Width of cutout 291⁄2 75.0
J
Depth of cutout 195⁄16 49.0
K
Depth from cutout to front of countertop 2 5.1
L
e
Recommended electrical access location
* Dimension can be reduced by 6" (15.2 cm) when bottom of wood or metal cabinet
is covered by not less than 1⁄4" (0.6 cm) flame retardant millboard covered with
not less than No. 28 MSG sheet metal, 0.015" (0.4 mm) stainless steel, 0.024"
(0.6 mm) aluminum or 0.020" (0.5 mm) copper.
If installing a hood or microwave hood combination above the cooktop,
follow the hood or microwave hood combination instructions for dimensional
clearances above the cooking surface.
ELECTRICAL REQUIREMENTS
240 volt, 60 Hz, AC only, 40-amp fused, grounded circuit is required. A dedicated
circuit is recommended. The length of conduit provided is for serviceability to
the cooktop.
LOCATION REQUIREMENTS
• To ensure cooktop base clearance, cabinet side walls need to be wider than the cutout.
• If cabinet has a drawer, allow a 51⁄8" (13.0 cm) minimum clearance between
countertop and top of drawer.
H
I
J
I
K
SIDE VIEW
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide
before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
TOP VIEW – CUTOUT
L
86 40dZ w1215
Loading...