Jenn-Air JFI2589AES3, JFI2589AES2, JFI2589AEP3, JFI2589AEP2, JFI2589AEP10 Owner’s Manual

THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING,
please visit our website at www.jennair.cem for additional information. If you still need assistance, call us at 1-800-688-1100. In
Canada, visit our website at www.jennair.ca or call us at 1-800-807-6777.

You will need your model and serial number located on the right-hand side of the refrigerator interior.

Para obtener acceso a "lnstrucciones para el usuario del refrigerador" en espaSol, o para obtener informaci6n adicional acerca de
su producto, visite: www.jennair.com.

Tenga listo su nQmero de modelo complete. Puede encontrar su nQmero de modelo y de serie en la etiqueta ubicada al lade
derecho del interior del refrigerador.

TableofContents/Tabledes mati res

REFRIGERATOR SAFETY ....................................................... 1

INSTALLATION INSTRUCTIONS ............................................ 2

REFRIGERATOR USE.............................................................. 8

REFRIGERATOR CARE ......................................................... 12

TROUBLESHOOTING ............................................................ 13

WATER FILTER CERTIFICATIONS ...................................... 15

PRODUCT DATA SHEETS .................................................... 16

WARRANTY ............................................................................ 17

SI:!:CURIT¢ DU RI:!:FRIGCRATEUR ....................................... 18

INSTRUCTIONS D'INSTALLATION ..................................... 19

UTILISATION DU REFRIGI:!:RATEUR .................................. 25

ENTRETIEN DU REFRIGI:!:RATEUR ..................................... 30

DI:!:PANNAGE ......................................................................... 31

FEUILLES DE DONNEES SUR LE PRODUIT ..................... 34

GARANTIE ............................................................................. 35

REFRIGERATORSAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow
instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

12828144A

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:

• Plug into a grounded 3 prong outlet.

• Do not remove ground prong.

• Do not use an adapter.

• Do not use an extension cord.

• Disconnect power before servicing.

• Replace all parts and panels before operating.

• Remove doors from your old refrigerator.

• Use nonflammable cleaner.

• Keep flammable materials and vapors, such as gasoline,
away from refrigerator.

• Use two or more people to move and install refrigerator.

• Disconnect power before installing ice maker (on ice maker

kit ready models only).

• Use a sturdy glass when dispensing ice (on some models).

SAVE THESE INSTRUCTIONS

ProperDisposalofYourOld Refrigerator

Suffocation Hazard
Remove doors from your old refrigerator.
Failure to do so can result in death or brain damage.

IMPORTANT: Child entrapment and suffocation are not problems
of the past. Junked or abandoned refrigerators are still dangerous

- even if they will sit for "just a few days." If you are getting rid of
your old refrigerator, please follow these instructions to help
prevent accidents.

INSTALLATIONINSTRUCTIONS

Excessive Weight Hazard

Use two or more people to move and install
refrigerator.

Failure to do so can result in back or other injury.

Before You Throw Away Your Old Refrigerator or Freezer:.

• Take off the doors.

• Leave the shelves in place so that children may not easily
climb inside.

When Moving Your Refrigerator:
Your refrigerator is heavy. When moving the refrigerator

for cleaning or service, be sure to protect the floor.
Always pull the refrigerator straight out when moving it.
Do not wiggle or "walk" the refrigerator when trying to move
it, as floor damage could occur.

Remove the Packaging

Remove tape and glue residue from surfaces before turning
on the refrigerator. Rub a small amount of liquid dish soap
over the adhesive with your fingers. Wipe with warm water
and dry.

Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator. For
more information, see "Refrigerator Safety."

• Dispose of/recycle all packaging materials.

Clean Before Using

After you remove all of the packaging materials, clean the inside
of your refrigerator before using it. See the cleaning instructions
in "Refrigerator Care."

important information to know about glass shelves

and covers:

Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
For your protection, tempered glass is designed to shatter
into many small, pebble-size pieces. This is normal. Glass
shelves and covers are heavy. Use special care when
removing them to avoid impact from dropping.

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from refrigerator.
Failure to de so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for a 1/211
(1.25 cm) space at the top and behind the refrigerator. If your
refrigerator has an ice maker, allow extra space at the back for
the water line connections. When installing your refrigerator next
to a fixed wall, leave a 2%" (7.0 cm) minimum space between the
refrigerator and wall to allow the door to swing open.

NOTE: It is recommended that you do not install the refrigerator
near an oven, radiator, or other heat source. Do not install the

refrigerator in a location where the temperature will fall below
55°F (13°C).

1/2" (1.25 cm)

7

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.
Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,
fire, or electrical shock.

Before you move your refrigerator into its final location, it is
important to make sure you have the proper electrical

connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded
electrical supply is required. It is recommended that a separate
circuit serving only your refrigerator be provided. Use an outlet
that cannot be turned off by a switch. Do not use an

extension cord.
NOTE: Before performing any type of installation, cleaning, or

removing a light bulb, turn the control (Thermostat, Refrigerator
or Freezer Control depending on the model) to OFF and then
disconnect the refrigerator from the electrical source. When you
are finished, reconnect the refrigerator to the electrical source
and reset the control (Thermostat, Refrigerator or Freezer Control
depending on the model) to the desired setting. See "Using the

Controls."

2¾" (7.0 cm)

,/

Gathertherequiredtoolsandpartsbeforestartinginstallation.
Readandfollowtheinstructionsprovidedwithanytoolslisted

here.

TOOLS NEEDED:

• Flat-blade screwdriver • %" Nut driver

• 7Ad'and W' Open-end or two • W' Drill bit

adjustable wrenches • Cordless drill

IMPORTANT:

• All installations must meet local plumbing code requirements.

• Do not use a piercing-type or 3/_6"(4.76 mm) saddle valve
which reduces water flow and clogs more easily.

• Use copper tubing and check for leaks. Install copper tubing
only in areas where the household temperatures will remain
above freezing.

Water Pressure

A cold water supply with water pressure of between 35 and
120 psi (241 and 827 kPa) is required to operate the water
dispenser and ice maker. If you have questions about your water
pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply
IMPORTANT: The pressure of the water supply coming out of a

reverse osmosis system going to the water inlet valve of the
refrigerator needs to be between 35 and 120 psi (241 and
827 kPa).

If a reverse osmosis water filtration system is connected to your
cold water supply, the water pressure to the reverse osmosis
system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).

If the water pressure to the reverse osmosis system is less than
40 to 60 psi (276 to 414 kPa):

• Check to see whether the sediment filter in the reverse
osmosis system is blocked. Replace the filter if necessary.

• Allow the storage tank on the reverse osmosis system to refill
after heavy usage.

If your refrigerator has a water filter, it may further reduce the
water pressure when used in conjunction with a reverse
osmosis system. Remove the water filter. See "Water
Filtration System."

If you have questions about your water pressure, call a licensed,
qualified plumber.

Read all directions before you begin.
IMPORTANT: If you turn the refrigerator on before the water line

is connected, turn the ice maker OFE

Connect to Water Line

1. Unplug refrigerator or disconnect power.

2. Turn OFF main water supply. Turn ON nearest faucet long

enough to clear line of water.

3. Locate a _/2"to 1W' (12.7 mm to 31.8 mm) vertical cold water
pipe near the refrigerator.

IMPORTANT:

• Make sure it is a cold water pipe.

• Horizontal pipe will work, but drill on the top side of the

pipe, not the bottom. This will help keep water away from
the drill and normal sediment from collecting in the valve.

4. Determine the length of copper tubing you need. Measure
from the connection on the rear of the refrigerator to the
water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use Y4"
(6.35 mm) O.D. (outside diameter) copper tubing. Be sure
both ends of copper tubing are cut square.

5. Using a cordless drill, drill a W' hole in the cold water pipe you
have selected.

A

C

D

G

A. Cold water pipe

B. Pipe clamp
C. Copper tubing
D. Compression nut

6. Fasten the shutoff valve to the cold water pipe with the pipe
clamp. Be sure the outlet end is solidly in the W' drilled hole
in the water pipe and that the washer is under the pipe clamp.
Tighten the packing nut. Tighten the pipe clamp screws
slowly and evenly so washer makes a watertight seal. Do not
overtighten or you may crush the copper tubing.

7. Slip the compression sleeve and compression nut on the
copper tubing as shown. Insert the end of the tubing into the
outlet end squarely as far as it will go. Screw compression nut
onto outlet end with adjustable wrench. Do not overtighten.

8. Place the free end of the tubing in a container or sink, and
turn ON the main water supply. Flush the tubing until water is
clear. Turn OFF the shutoff valve on the water pipe. Coil the
copper tubing.

E. Compression sleeve
F. Shutoff valve

G. Packing nut

Connect to Refrigerator

1. Remove plastic cap from water supply connection. Place

brass nut and compression sleeve on copper tube end as
shown.

/

A. Brass nut

B.Compression sleeve

2. Place end of copper tubing into plastic water valve supply
line. Slide the brass nut over the sleeve and screw the nut into

supply line.

3. Using an adjustable wrench, hold the nut on the plastic water
line to keep it from moving. Then, with a second wrench turn
the nut on the copper tubing counterclockwise to completely
tighten. Do not overtighten.

4. Check connection by pulling on the copper tubing.

5. Attach the copper tubing to the refrigerator with a "P" clamp.
Slide the plastic waterline into the retainer.

Complete the Installation

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.
Do not use an adapter.

Do not use an extension cord,

Failure to follow these instructions can result in death,
fire, or electrical shock.

1. Plug into a grounded 3 prong outlet.

2. Flush the water system. See "Water and Ice Dispenser."
NOTE: Allow 24 hours to produce the first batch of ice. Discard

the first three batches of ice produced. Allow 3 days to
completely fill the ice container.

All graphics referenced in the following instructions are included
later in this section after "Final Steps."

A. "P" Clamp
B. Brass nut

6=

Turn on water supply to refrigerator and check for leaks.
Correct any leaks.

C. Compression sleeve

Remove and Replace Handles

1. Using a %2" Allen wrench, loosen the two set screws located
on the side of each handle. See Metal Handle graphics 1

and 2.

2. Pull the handle straight out from the door. Make sure you
keep the screws for reattaching the handles.

3. To replace the handles, reverse the directions.

Remove Doors and Hinges

IMPORTANT:

• Remove food and any adjustable door or utility bins from
doors.

• Keep the refrigerator doors closed until you are ready to lift
them free from the cabinet.

NOTE: Provide additional support for the refrigerator door
while the hinges are being removed. Do not depend on the
door gasket magnets to hold the door in place while you are
working.

TOOLS NEEDED: %6", %", 1/4"hex-head socket wrench,
#2 Phillips screwdriver, and a flat-blade screwdriver.

1. Unplug refrigerator or disconnect power.

2. Remove the base grille. Grasp the grille firmly and pull it
toward you.

3. Starting with the right-hand side door, remove the parts for
the top hinge as shown in Top Hinge graphic. Lift the

refrigerator door from the bottom hinge pin.

4. Remove the shim from the bottom hinge pin and keep it for
later use. See Bottom Hinge graphic.

5. Remove top hinge cover from left side refrigerator door.
Disconnect the wiring plug located on top of the hinge by

wedging a flat-blade screwdriver or your fingernail between
the two sections. See Connections graphic.

6. Disconnect the water line by holding the tabbed section of
the water line while turning the black locking collar clockwise.

See Connections graphic.

7. Remove the parts for the top hinge as shown in Top Hinge
graphic. Lift the left-hand side door from the bottom hinge

pin.
NOTE: On some models, remove the shim from the bottom

hinge pin and keep it for later use. See Bottom Hinge graphic.

8. Using a %" hex wrench, remove the leveling leg brackets from
the bottom of the cabinet. Keep screws for later use.

Remove and Replace Freezer Drawer

IMPORTANT: Two people may be required to remove and

replace the freezer drawer. Graphics are included later in this
section.

Remove Drawer Front

1. Open the freezer drawer to full extension.

2. Loosen the four screws attaching the drawer glides to the
drawer front. See Drawer Front Removal graphic.

NOTE: Loosen screws three to four turns. Keep the screws in
the drawer front.

3. Lift drawer front upward and off the screws. See Drawer Front
Removal graphic.

Replace Drawer Front

1. Slide the drawer glides out of the freezer compartment. Insert
the screws in the top of the drawer front into the slots in the
drawer brackets. See Drawer Front Replacement graphic.

2. Pull the drawer brackets toward you to position the two
screws in the bottom of the drawer front into the brackets.

See Drawer Front Replacement graphic.

3. Completely tighten the four screws.

Final Steps

Replace Doors and Hinges

1=

Assemble the parts for the top hinge as shown in Top Hinge
graphic. Do not tighten the screws completely.

2.

Replace the parts for the bottom hinge as shown in Bottom
Hinge graphic. Tighten screws, Replace the refrigerator door.

NOTE: Provide additional support for the refrigerator door
while the hinges are being moved. Do not depend on the door
gasket magnets to hold the door in place while you are
working.

3. Align the door so that the bottom of the refrigerator door
aligns evenly with the top of the freezer drawer. Tighten all

screws.

4. Reconnect the wiring plug on top of the left-hand side
refrigerator door.

5. Reconnect the water lines by firmly pushing one line inside
the other. Slide the black locking collar fully forward.

6. While holding the tabbed section of the waterline, turn the
locking collar counterclockwise until you hear a "click."

NOTE: The arrow on the tabbed section should align with the
two bars on the locking collar.

7. Check for leaks. Replace the top hinge covers.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.
Do not use an adapter.

Do not use an extension cord,

Failure to follow these instructions can result in death,
fire, or electrical shock.

1. Plug in refrigerator to a grounded 3 prong outlet.

2. Return all removable parts to doors and drawer and food to
refrigerator and freezer.

Top Hinges

A. Hinge Cover Screw
B. Top Hinge Cover
C. 5A_"Hex-Head Hinge Screws

D. Top Hinge

Connections

Metal Handle

A. %2"Set Screw

@

A. Tabs

B. Wiring Plug

A. Loosen Door Bracket Screws

A. %2"Set Screw

Depending on your model, your refrigerator may have four
adjustable rollers (Style 1) or a leveling screw (Style 2)located at
the base of the refrigerator. If your refrigerator seems unsteady or
you want the door to close more easily, use the instructions

below.

1. Remove the base grille. Grasp the grille firmly and pull it
toward you.

2= Raise or lower the cabinet.

Style 1 - Front and rear leveling
Using a %" hex driver, turn the roller adjustment screw(s) on

each side to raise or lower that side of the refrigerator.
NOTE: Having someone push against the top of the

refrigerator takes some weight off the adjustment screws and
rollers. This makes it easier to turn the screws. It may take

several turns of the roller adjustment screw to adjust the tilt of
the refrigerator.

• To raise, turn the roller adjustment screw to the right.

• To lower, turn the roller adjustment screw to the left.
Turn the brake foot clockwise until it is firmly against the floor

to keep the refigerator from rolling forward when the freezer
drawer is pulled open.

To lower, turn the leveling screw counterclockwise.

A. Levelingscrew

3. Open the door again to make sure that it closes as easily as
you like. If not, tilt the refrigerator slightly more to the rear by
turning both leveling screws clockwise. It may take several
more turns, and you should turn both screws the same

amount.

4. Replace the base grille.

REFRIGERATORUSE

There are two refrigerator compartment doors. The doors can be
opened and closed either separately or together.

There is a vertically-hinged seal on the left refrigerator door.

• When the left side door is opened, the hinged seal
automatically folds inward so that it is out of the way.

• When both doors are closed, the hinged seal automatically
forms a seal between the two doors.

A. Rear roller adjustment screw

B. Front roller adjustment screw
C. Brake foot

Style 2 - Leveling screw
Using a 1/4"hex driver, turn the leveling screw on each side to

raise or lower that side of the refrigerator.
NOTE: Having someone push against the top of the

refrigerator takes some weight off the leveling screws. This
makes it easier to turn the screws. It may take several turns of

the leveling screw to adjust the tilt of the refrigerator.

• To raise, turn the leveling screw clockwise.

A. Hinged seal

IMPORTANT:

• The control panel is located on the front of the ice and water
dispenser.

To access the main control menu, press any of the four touch
pads located on either side of the display. Then, touch the
pad next to the desired option or user setting to access the

various features.
NOTE: Press only the touch pads next to your selection on

the display screen, not the selection itself.

Wait24hoursforyourrefrigeratortocoolcompletelybefore
addingfood.Ifyouaddfoodbeforetherefrigeratorhas
cooledcompletely,yourfoodmayspoil.

NOTE:Adjustingtherefrigeratorandfreezertemperature
controlstoacolderthanrecommendedsettingwillnotcool
thecompartmentsanyfaster.

Therecommendedsettingsshouldbecorrectfornormal
householdrefrigeratoruse.Thecontrolsaresetcorrectly
whenmilkorjuiceisascoldasyoulikeandwhenicecream

isfirm.
Ifthetemperatureistoowarmortoocoldintherefrigeratoror

freezer,firstchecktheairventstobesuretheyarenot
blockedbeforeadjustingthecontrols.

A j

A. Touch pads

_A

To Adjust Set Point Temperatures:
The display will show the set point for approximately 3 seconds.

• Press the touch pad next to "WARMER" or "COLDER" to
adjust the set point to the desired temperature. Then, press
the touch pad next to "Done" to lock in the new set point
temperature.

NOTE: Except when first turning on the refrigerator, do not adjust
either temperature control more than one setting at a time. Wait
24 hours for the temperature to stabilize between adjustments.

CONDITION/REASON: ADJUSTMENT:

REFRIGERATOR too warm FRESH FOOD Control

1o lower

FREEZER too warm/too little ice FREEZER Control

1o lower

REFRIGERATOR too cold FRESH FOOD Control

1o higher

FREEZER too cold FREEZER Control

1o higher

Temperature Controls

For your convenience, your temperature controls are preset at
the factory. When you first install your refrigerator, make sure the
controls are still set to the recommended set points.

• Press the touch pad next to "FRESH FOOD TEMP" on the
main menu to display the current set point of the
compartment. Press the touch pad next to "WARMER" or
"COLDER" to adjust the set point to the recommended 38°R
Press the touch pad next to "Done" to lock in the setting.

Press the touch pad next to "FREEZER TEMP" on the main
menu to display the current set point of the compartment.
Press the touch pad next to "WARMER" or "COLDER" to
adjust the set point to the recommended 0°R Press the touch
pad next to "Done" to lock in the setting.

To Turn Cooling Off/On:

Cooling On/Off controls all cooling functions, the control panel
and the dispenser. It does not disconnect power to the
refrigerator.

• Press and hold the On/Off button for three seconds. The LED
will light up to indicate that cooling is Off. Neither

compartment will cool.

• Press the On/Off button again to turn on the cooling. The LED
will turn off.

[]

Cooling

hold3sec

Adjusting Controls

The FRESH FOOD TEMP control adjusts the refrigerator
compartment temperature. The FREEZER TEMP control adjusts
the freezer compartment temperature.

If you need to adjust the temperature in either the refrigerator or
freezer compartment, use the settings listed in the chart as a
guide.

Options

Door Alarm

The Door Alarm feature sounds an audible alarm every few
seconds when the either refrigerator door has been left open for

3 continuous minutes. The alarm will sound until the door is
closed or Door Alarm is turned off.

1. On the main menu, press the touch pad next to "Options."

2. Press the touch pad next to "Door Alarm Is On" to switch
between ON and OFR Press the touch pad next to "Done" to
lock in the desired setting and return to the main menu.

Humidity Control (on some models)

The humidity control feature turns on a heater to help reduce
moisture on the door hinge seal. Use in humid environments or
when you notice moisture on the door hinge seal. The refrigerator
uses more energy when Humidity Control is on.

1. On the main menu, press the touch pad next to "Options."

2. Press the touch pad next to "Humid Ctrl Is On" to switch
between ON and OFR Press the touch pad next to "Done" to
lock in the desired setting and return to the main menu.

Vacation Mode

The vacation mode feature decreases the number of automatic
defrost cycles. Once set, vacation mode will remain on until a

door is opened or the feature is turned off on the control panel.
NOTE: Door openings are ignored for the first hour after Vacation

mode is activated.

1. On the main menu, press the touch pad next to "Options."

2. In each of the following screens, continue to press the touch
pad next to "More Options" until "Vac. Mode is Off" appears
on the display.

3. Press the touch pad next to "Vac. Mode is Off" to switch
between ON and OFR Press the touch pad next to "Done" to
lock in the desired setting and return to the main menu.

Max Cool

The Max Cool feature assists with periods of high refrigerator or
freezer use, full grocery loads, or temporarily warm room
temperatures by lowering the freezer and refrigerator to the
minimum temperatures.

1. On the main menu, press the touch pad next to "Options."

2. In each of the following screens, continue to press the touch
pad next to "More Options" until "Max Cool is Off" appears
on the display.

3. Press the touch pad next to "Max Cool is Off" to switch
between ON and OFE Press the touch pad next to "Done" to
lock in the desired setting and return to the main menu.

NOTE: The Max Cool feature will automatically shut off in
approximately 2 hours.

Sabbath Mode

The Sabbath mode feature turns off all lights, disables the water
and ice dispenser, disables all alarms and tones, disables the
automatic defrost feature and disables the control panel.

While the refrigerator is operating in Sabbath mode, any touch of
the control panel will display the Sabbath mode control which will
allow you to turn off the Sabbath mode feature.

Turn Sabbath mode on:

1. On the main menu, press the touch pad next to "Options."

2. In each of the following screens, continue to press the touch
pad next to "More Options" until "Sabbath Is Off" appears on
the display.

3. Press the touch pad next to "Sabbath Is Off" to switch
between ON and OFE Press the touch pad next to "Done" to
lock in the desired setting and return to the main menu.

Temp Alarm

The TempAlarm feature alerts you if the temperature exceeds
normal operating temperatures, for an hour or longer, in either or
both the refrigerator and freezer compartments. An audible alarm
will sound repeatedly and the highest temperature reached in
each compartment will be displayed.

NOTE: Touch any pad on the control panel to turn off the audible
alarm. Temp Alarm will automatically reset once the warm

condition has been corrected for 30 minutes.

1. On the main menu, press the touch pad next to "Options."

2. In each of the following screens, continue to press the touch
pad next to "More Options" until "Temp Alarm Is Off" appears
on the display.

3. Press the touch pad next to "Temp Alarm Is Off" to switch
between ON and OFE Press the touch pad next to "Done" to
lock in the desired setting and return to the main menu.

Replace H20 Filter

See "Water Filtration System."

User Settings

The control center allows you to set user preferences, if desired.

Language

The language preference allows you to change the control panel
display to English, French or Spanish.

1. On the main menu, press the touch pad next to "User
Settings."

2. Press the touch pad next to "Select Language."

3. Press the touch pad next to either "Mettre En Frangais" or

"Cambiar En Espar_ol." Press the touch pad next to "Confirm"
to lock in the setting and return to the main menu.

Temperature Display

The temperature display preference allows you to change the
control panel display from degrees Fahrenheit to degrees

Celsius.

1. On the main menu, press the touch pad next to "User
Settings."

2. Press the touch pad next to "Fahrenheit Is On" to switch
between Fahrenheit and Celsius. Press the touch pad next to
"Done" to lock in the desired setting and return to the main

menu.

Display Brightness

The Display Brightness preference adjusts the backlight level of
the control panel.

1. On the main menu, press the touch pad next to "User
Settings."

2. In each of the following screens, continue to press the touch
pad next to "More Settings" until "Display Brightness"
appears on the display.

3. Press the touch pad next to "Lighter" or "Darker" to adjust
the setting between 1 (darkest) and 5 (lightest). Press the
touch pad next to "Done" to lock in the desired setting and

return to the main menu.

Adjust Light Sensor

The "Adjust LiteSensor" preference allows you to adjust the level
at which the Light Sensor will detect darkness and activate the
Auto On mode for the dispenser light.

1. On the main menu, press the touch pad next to "User
Settings."

2. In each of the following screens, continue to press the touch
pad next to "More Settings" until "Adjust LiteSensor" appears
on the display.

3. Press the touch pad next to "Lighter" or "Darker" to adjust
the setting between 1 (darkest) and 9 (lightest). Press the
touch pad next to "Done" to lock in the desired setting.

Alarm Sound

The alarm sound preference allows you to turn off any audible
alarms (door open, too warm etc.) when quick and simple
remedies are not possible. It will not disable alarm features or
visual displays.

1. On the main menu, press the touch pad next to "User
Settings."

2. In each of the following screens, continue to press the touch
pad next to "More Settings" until "Alrm Sound Is On" appears
on the display.

3. Press the touch pad next to "Alrm Sound Is On" to switch
between ON and OFR Press the touch pad next to "Done" to
lock in the desired setting and return to the main menu.

% _ • _.. ,_ ,_ _•

You can control the amount of humidity in the moisture-sealed
crisper. Depending on your model, adjust the control to any
setting between FRUIT and VEGETABLES or LOW and HIGH.

FRUIT / LOW (open) for best storage of fruits and vegetables
with skins,

VEGETABLES / HIGH (closed) for best storage of fresh, leafy

vegetables.

Co,so......o©@_ !J ?l,,_,,_;÷

10

Remember

The ice maker and storage bin are located in the upper left-hand •
side of the refrigerator compartment.

Turning the Ice Maker On/Off

The On/Off switch is located on the side of the ice maker.
Toturn on the ice maker, press the switch to the ON position.

To manually turn off the ice maker, press the switch to the OFF
position.

NOTE: Your ice maker has an automatic shutoff. The ice maker
sensors will automatically stop ice production, but the control will

remain in the ON position.

Removing and Replacing Ice Storage Bin

To Remove the Ice Storage Bin:

1. Hold the base of the storage bin and press the release button
on the lower right.

2. Pull the storage bin out until resistance is felt. Lift up the front
of the ice bin and remove.

3. Press the switch to the OFF position

To Replace the Ice Storage Bin:
IMPORTANT: It may be necessary to turn the auger driver,

behind the ice bin, counterclockwise to properly align the ice bin
with the auger driver. The ice storage bin must be locked in place
for proper ice dispensing.

1. Press the switch to the ON position

2. Slide the ice bin into the guide rails located on either side of
the enclosure.

3. Push the ice bin in until resistance is felt. Raise the front •
slightly and push the ice bin in until an audible "click" is

heard.

The quality of your ice will be only as good as the quality of
the water supplied to your ice maker. Avoid connecting the
ice maker to a softened water supply. Water softener
chemicals (such as salt) can damage parts of the ice maker
and lead to poor quality ice. If a softened water supply cannot
be avoided, make sure the water softener is operating
properly and is well maintained.

• Do not use anything sharp to break up the ice in the bin. This
can cause damage to the ice bin and dispenser mechanism.

• Do not store anything on top of the ice maker or in the ice
storage bin.

_ _.,7_,,_ ¸ _, _,,_ _ _y,_.,,_ _

IMPORTANT:

• After connecting the refrigerator to a water source, flush the
water system. Press the Water button on the control panel.
Use a sturdy container to depress and hold the dispenser
lever for 5 seconds, then release it for 5 seconds. Repeat
until water begins to flow. Once water begins to flow,
continue depressing and releasing the dispenser lever
(5 seconds on, 5 seconds off) for an additional 2 minutes.
This will flush air from the filter and water dispensing system.
Additional flushing may be required in some households. As
air is cleared from the system, water may spurt out of the
dispenser.

NOTE: After five minutes of continuous dispensing, the
dispenser will stop dispensing water to avoid flooding. To
continue dispensing, remove the container and press the
dispensing lever again.

Allow 24 hours for the refrigerator to cool down and chill
water. Dispense enough water every week to maintain a fresh
supply.

Allow 24 hours to produce the first batch of ice. Discard the
first three batches of ice produced.

A. ON position
B. Auger driver

Ice Production Rate

Allow 24 hours to produce the first batch of ice. Discard the
first three batches of ice produced.

The ice maker should produce approximately 8 to 12 batches
of ice in a 24-hour period.

To increase ice production, lower the freezer and refrigerator
temperature. See "Using the Controls." Wait 24 hours
between adjustments.

Dispense Ice and Water

Cut Hazard

Use a sturdy glass when dispensing ice.
Failure to do so can result in cuts.

• The dispenser will dispense either water or cubed ice.

• Express Fill allows you to dispense water into containers that
will not fit within the dispenser area, such as sport bottles.

1. Select water or cubed ice by touching the word "WATER" or
"CUBES" on the control panel. The light above the control
indicates your selection.

m

[]

[Water]

[]

I Cubes

11