JENN-AIR JES9800AAB, JES9800AAQ, JES9800AAS, JES9800AAW, JES9800ACB Owner's Manual

...

JENN-AIR ELECTRIC DOWNDRAFT SLIDE-IN RANGEJENN-AIR ELECTRIC DOWNDRAFT SLIDE-IN RANGE

USER

G U I D E

TABLE OF CONTENTS

Safety Instructions ................................................................... 1-3

Ducting Information....................................................................3

Surface Cooking....................................................................... 4-6

Oven Cooking ........................................................................ 7-14

Care & Cleaning.................................................................. 15-17

Maintenance ............................................................................... 18

Before You Call for Service ................................................... 19

Warranty .................................................................................... 21

Guide de l’utilisateur................................................................ 22

Guía del Usuario ....................................................................... 42

IMPORTANT SAFETY INSTRUCTIONS

Installer: Please leave this manual with this appliance.

Consumer: Please read and keep this manual for future reference. Keep sales receipt and/or cancelled check as proof of purchase.

Model Number

–– –– –– –– –– –– –– –– ––

Serial Number

–– –– –– –– –– –– –– –– ––

Date of Purchase

_______________________________

If you have questions, call:

Jenn-Air Customer Assistance 1-800-688-1100 1-800-688-2080 ( U.S. TTY for hear-

ing or speech impaired) (Mon.-Fri., 8 am-8 pm Eastern Time)

Internet: http://www.jennair.com

For service information, see page

21.

SAFETY INSTRUCTIONS

Warning and Important Safety Instructions appearing in this guide are not meant to cover all possible conditions and situations that may occur. Common sense, caution, and care must be exercised when installing, maintaining, or operating the appliance.

Always contact your dealer, distributor, service agent, or manufacturer about problems or conditions you do not understand.

RECOGNIZE SAFETY SYMBOLS, WORDS, LABELS

WARNING

WARNING – Hazards or unsafe practices which COULD result in severe personal injury or death.

CAUTION

CAUTION – Hazards or unsafe practices which COULD result in minor personal injury.

Read and follow all instructions before using this appliance to prevent the

potential risk of fire, electric shock, personal injury or damage to the appliance as a result of improper usage of the appliance. Use appliance only for its intended purpose as described in this guide.

To ensure proper and safe operation:

Appliance must be properly installed and grounded by a qualified technician.

WARNING:

• ALL RANGES CAN TIP AND CAUSE INJURIES TO PERSONS

• INSTALL ANTI-TIP DEVICE PACKED WITH RANGE

• FOLLOW ALL INSTALLATION INSTRUCTIONS

WARNING: To reduce risk of tipping of the appliance from abnormal usage or by excessive loading of the oven door, the appliance must be secure by a properly installed anti-tip device.

To check if device is properly installed, look underneath range with a flashlight to make sure one of the rear leveling legs is properly engaged in the bracket slot. The anti-tip device secures the rear leveling leg to the floor when properly engaged. You should check this anytime the range has been moved.

IN CASE OF FIRE

Turn off appliance and ventilating hood to avoid spreading the flame. Extinguish flame then turn on hood to remove smoke and odor.

• Cooktop: Smother fire or flame in a pan

with a lid or cookie sheet. NEVER pick up or move a flaming pan.

In our continuing effort to improve the quality and performance of our cooking products, it may be necessary to make changes to the appliance without revising this guide.

• Oven: Smother fire or flame by closing

the oven door.

Do not use water on grease fires. Use baking soda, a dry chemical or foam-type extinguisher to smother fire or flame.

GENERAL INSTRUCTIONS

WARNING

NEVER use appliance door, or drawer, if equipped, as a step stool or seat as this may result in possible tipping of the appliance, damage to the appliance, and serious injuries.

If appliance is installed near a window, precautions should be taken to prevent curtains from blowing over surface elements.

NEVER use appliance to warm or heat the room. Failure to follow this instruction can lead to possible burns, injury, fire, or damage to the appliance.

NEVER wear loose-fitting or hanging garments while using the appliance. Clothing could catch utensil handles or ignite and cause burns if garment comes in contact with hot heating elements.

To ensure proper operation and to avoid damage to the appliance or possible injury, do not adjust, service, repair or replace any part of the appliance unless specifically recommended in this guide. Refer all other servicing to a qualified technician.

NEVER store or use gasoline or other combustible or flammable materials in the oven, near surface units or in the vicinity of this appliance as fumes could create a fire hazard or an explosion.

To prevent grease fires, do not let cooking grease or other flammable materials accumulate in or near the appliance.

Use only dry potholders. Moist or damp potholders on hot surfaces may result in a steam burn. Do not let potholders touch hot heating elements. Do not use a towel or other bulky cloth which could easily touch hot heating elements and ignite.

Always turn off all controls when cooking is completed.

NEVER heat unopened containers on the surface unit or in the oven. Pressure build-up in the container may cause container to

burst resulting in burns, injury or damage to the appliance.

This appliance has been tested for safe performance using conventional cookware. Do not use any devices or accessories that are not specifically recommended in this manual. Do not use eyelid covers, stove top grills or add-on oven convection systems. The use of devices or accessories that are not expressly recommended in this manual can create serious safety hazards, result in performance problems, and reduce the life of the components of this appliance.

NEVER use aluminum foil to line drip bowls or cover oven racks or oven bottom. This could result in risk of electric shock, fire, or damage to the appliance. Use foil only as directed in this guide.

Aerosol-type cans are EXPLOSIVE when exposed to heat and may be highly flammable. Do not use or store near appliance,

COOKTOP

NEVER leave surface units unattended especially when using high heat. An unattended boilover could cause smoking and a greasy spillover can cause a fire.

This appliance is equipped with different size surface elements. Select pans with flat bottoms large enough to cover element. Fitting pan size to element will improve cooking efficiency.

If pan is smaller than element, a portion of the element will be exposed to direct contact and could ignite clothing or potholder.

Only certain types of glass, glass/ceramic, ceramic, earthenware, or other glazed utensils are suitable for cooktop or oven service without breaking due to the sudden change in temperature. Follow utensil manufacturer’s instructions when using glass.

Turn pan handle toward center of cooktop, not out into the room or over another surface element. This reduces the risk of burns, ignition of flammable materials, or spillage if pan is accidently bumped or reached by small children.

GLASS-CERAMIC COOKTOP

NEVER cook on broken cooktop. If cooktop should break, cleaning solutions and spillovers may penetrate the broken cooktop and create a risk of electric shock. Contact a qualified technician immediately.

Clean cooktop with caution. Some cleaners can produce noxious fumes if applied to a hot surface. If a wet sponge, cloth, or paper towel is used on a hot cooking area, be careful to avoid steam burn.

DEEP FAT FRYERS

Use extreme caution when moving the grease pan or disposing of hot grease. Allow grease to cool before attempting to move pan.

OVEN

Use care when opening door. Let hot air or steam escape before removing or replacing food.

For proper oven operation and performance, do not block or obstruct oven vent duct located on the right side of the the air grille. When oven is in use, the area near the vent becomes hot enough to cause burns.

Always place oven racks in desired locations while oven is cool. If rack must be moved while oven is hot, do not let potholder contact hot element in oven.

SELF-CLEANING OVEN

Clean only parts listed in this guide. Do not clean door gasket. The gasket is essential for a good seal. Do not rub, damage, or move the gasket.

Do not use oven cleaners. No commercial oven cleaner or oven liner protective coating of any kind should be used in or around any part of the oven.

Before self-cleaning the oven, remove broiler pan, oven racks and other utensils to prevent excessive smoking, discoloration of the oven racks or possible damage to utensils.

IMPORTANT SAFETY INSTRUCTIONS, CONT.

Wipe up excessive spillovers, especially greasy spills, before the clean cycle to prevent smoking, flare-ups or flaming.

It is normal for the cooktop to become hot during a clean cycle. Therefore, avoid touching the cooktop, door, window or oven vent during a clean cycle.

Slide-in ranges feature a cooling fan which operates automatically during a clean cycle. If the fan does not turn on, cancel the clean operation and contact an authorized servicer.

HEATING ELEMENTS

NEVER touch surface or oven heating elements, areas near elements, or interior surfaces of oven.

Heating elements may be hot even though they are dark in color. Areas near surface elements and interior surfaces of an oven may become hot enough to cause burns.

During and after use, do not touch or let clothing or other flammable materials contact heating elements, areas near elements, or interior surfaces of oven until they have had sufficient time to cool.

Other potentially hot surfaces include: Cooktop, areas facing the cooktop, oven vent, and surfaces near the vent opening, oven door, areas around the door and oven window.

CHILD SAFETY

CAUTION

NEVER store items of interest to children in cabinets above an appliance or on backguard of a range. Children climbing on the appliance door to reach items could be seriously injured.

NEVER allow children to sit or stand on any part of the appliance as they could be injured or burned.

Children must be taught that the appliance and utensils in or on it can be hot. Let hot utensils cool in a safe place, out of reach of small children. Children should be taught that an appliance is not a toy. Children should not be allowed to play with controls or other parts of the unit.

IMPORTANT SAFETY NOTICE AND WARNING

The California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65) requires the Governor of California to publish a list of substances known to the State of California to cause cancer or reproductive harm, and requires businesses to warn customers of potential exposures to such substances.

Users of this appliance are hereby warned that when the oven is engaged in the self-clean cycle, there may be some low level exposure to some of the listed substances, including carbon monoxide. Exposure to these substances can be minimized by properly venting the oven to the outdoors during the self-clean cycle by opening a window and/or door in the room where the appliance is located.

IMPORTANT NOTICE REGARDING PET BIRDS: Never keep pet birds in the

kitchen or in rooms where the fumes from the kitchen could reach. Birds have a very sensitive respiratory system. Fumes released during an oven self-cleaning cycle may be harmful or fatal to birds. Fumes released due to overheated cooking oil, fat, margarine and overheated non-stick cookware may be equally harmful.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

DUCTING INFORMATION

Jenn-Air’s ventilation system is designed to capture both cooking fumes and smoke from the cooktop surface. If the system does not, these are some ducting installation situations to check:

• 6" diameter round or 3 gular ducting should be used for duct lengths 10'-60'. Note: 5" diameter round

ducting may be used if the duct length is 10' or less.

/4" x 10" rectan-

• No more than three 90° elbows should be used. Distance between elbows should be at least 18".

• Recommended Jenn-Air wall cap MUST be used. Make sure damper moves freely when ventilation system is operating.

• There should be a minimum clearance of 6" for cooktop installed near a side wall.

If there is not an obvious improper installation, there may be a concealed problem such as a pinched joint, obstruction in the pipe,

etc. Installation is the responsibility of the installer and questions should be addressed first by the installer. The installer should very carefully check the ducting installation instructions.

• Use the Flow Tester Card provided with your appliance to check the air flow.

SURFACE COOKING

SURFACE CONTROLS

Use to turn on the surface elements. An infinite choice of heat settings is available from lo to hi. The knobs can be set on or between any of the settings.

SETTING THE CONTROLS

1. Place pan on surface element.

2. Push in and turn the knob in either

direction to the desired heat setting.

• The control panel is marked to identify which element the knob

controls. For example, indicatesright front element.

3. There is an indicator light above each

control knob. When a surface control knob is turned on, the light will turn on. The light will turn off when the surface element is turned off.

4. After cooking, turn knob to OFF. Re-

move pan.

DUAL ELEMENT

The cooking surface is equipped with two dual elements located in the right front and left rear positions. To operate, push in on the control knob and turn to the right to control the large element, or push in and turn to the left to control the small element.

OFF

SMALL

ELEMENT

LARGE

ELEMENT

CAUTION

BEFORE COOKING

• Always place a pan on the surface unit before you turn it on. To prevent damage to range, never operate surface unit without a pan in place.

• NEVER use the cooktop as a storage area for food or cookware.

DURING COOKING

• Be sure you know which knob controls which surface unit. Make sure you turned on the correct surface unit.

• Begin cooking on a higher heat setting then reduce to a lower setting to complete the operation. Never use a high heat setting for extended cooking.

• NEVER allow a pan to boil dry. This could damage the pan and the appliance.

• NEVER touch cooktop until it has cooled. Expect some parts of the cooktop, especially around the surface units, to become warm or hot during cooking. Use potholders to protect hands.

AFTER COOKING

• Make sure surface unit is turned off.

• Clean up messy spills as soon as possible.

OTHER TIPS

• If cabinet storage is provided directly above cooking surface, limit it to items that are infrequently used and can be safely stored in an area subjected to heat.

Temperatures may be unsafe for items such as volatile liquids, cleaners or aerosol sprays.

• NEVER leave any items, especially plastic items, on the cooktop. The hot air from the vent may ignite flammable items, melt or soften plastics, or increase pressure in closed containers causing them to burst.

• NEVER allow aluminum foil, meat probes or any other metal object, other than a pan on a surface element, to contact heating elements.

SUGGESTED HEAT SETTINGS

The size, type of cookware and cooking operation will affect the heat setting. For information on cookware and other factors affecting heat settings, refer to “Cook-

ing Made Simple” booklet.

hi: Use to bring liquid to a boil. Always

reduce setting to a lower heat when liquids begin to boil or foods begin to cook.

med. hi: Use to brown meat, heat oil for deep fat frying or sauteing. Maintain fast boil for large amounts of liquids.

medium: Use to maintain slow boil for large amounts of liquids and for most frying.

med. hi

med. lo: Use to continue cooking covered foods or steam foods.

lo: Use to keep foods warm and melt chocolate and butter.

○○○○

OFF

○○○

medium

○○○

○○○○

med. lo

SURFACE COOKING, CONT.

GLASS-CERAMIC SURFACE

NOTES:

• On Canadian models, some or all of the surface will not operate during a self-clean cycle.

• Cooktop may emit light smoke and odor the first few times the cooktop is used. This is normal.

• When a control is turned on, a red glow can be seen through the glass-ceramic surface. The element will cycle on and off to maintain the preset heat setting.

• Glass-ceramic cooktops retain heat for a period of time after the unit is turned off. When the HOT SURFACE light turns off (see below), the cooking area will be cool enough to touch.

• NOTE: Do not attempt to lift the cooktop.

HOT SURFACE INDICATOR LIGHTS

Your cooktop has Hot Surface Lights located next to the elements. These lights indicate when the adjacent cooking area is hot to the touch even after the control has been turned off. The red light will re-

main on until the area has cooled.

HOT SURFACE

LIGHTS ON COOKTOP

COOKING AREAS

The cooking areas on your cooktop are identified by permanent patterns on the glass-ceramic surface. For most efficient cooking, fit the pan size to the element size.

Pans should not extend more than 1/2 to 1-inch beyond the cooking area.

TIPS TO PROTECT

GLASS-CERAMIC

THE

SURFACE

• Before first use, clean the cooktop. (See Cleaning, page 16.)

• Do not use glass pans. They may scratch the surface.

• Do not allow plastic, sugar or foods with high sugar content to melt onto the hot cooktop. Should this happen, clean immediately. (See Cleaning, page 16.)

• Never let a pan boil dry as this will damage the surface and pan.

• Never use cooktop as a work surface or cutting board. Never cook food directly on the surface.

• Never place a trivet or wok ring between the surface and pan. These items can mark or etch the top.

• Do not slide aluminum pans across a hot surface. The pans may leave marks which need to be removed promptly. (See Cleaning, page 16.)

• Make sure the surface and the pan bottom are clean before turning on to prevent scratches.

• To prevent scratching or damage to the glass-ceramic top, do not leave sugar, salt or fats on the cooking area. Wipe the cooktop surface with a clean cloth or paper towel before using.

• Never use a soiled dish cloth or sponge to clean the cooktop surface. A film will remain which may cause stains on the cooking surface after the area is heated.

• Do not use a small pan on a large element. Not only does this waste energy, but it can also result in spillovers burning

onto the cooking area which requires extra cleaning

• Do not use non-flat specialty items that are oversized or uneven such as round bottom woks, rippled bottom and/or oversized canners and griddles.

• Do not slide heavy metal pans across the surface since these may scratch.

• Do not use foil or foil-type containers. Foil may melt onto the glass. If metal melts on the cooktop, do not use. Call an authorized Jenn-Air Servicer.

• If a spillover occurs while cooking, immediately clean the spill from the cooking area while it is hot to prevent a tough cleaning chore later. Using extreme care, wipe spill with a clean dry towel.

• Do not allow spills to remain on the cooking area or the cooktop trim for a long period of time.

• Do not use abrasive cleansing powders or scouring pads which will scratch the cooktop.

• Do not use chlorine bleach, ammonia or other cleansers not specifically recommended for use on glass-ceramic.

• To retain the appearance of the glassceramic cooktop, clean after each use.

NOTES:

• Glass ceramic surfaces retain heat.

Turn the elements off a few minutes before food is completely cooked and use the retained heat to complete the cooking.

Because of the heat retention characteristics, the elements will not respond to changes in settings as quickly as coil elements. In the event of a

potential boilover, remove the pan from the cooking area.

COOKWARE

To achieve optimum cooking performance, use heavy-gauge, flat, smooth bottom pans that conform to the diameter of the cooking area. ( See “Cooking Made Simple” for cookware characteristics and recommendations.)

WOK COOKING

Use Jenn-Air’s flat bottom wok (Model AO142) for optimum results. The wok has a nonstick finish, wood handles, cover, steaming rack, rice paddles, cooking tips and recipes.

• The fan can be used to remove strong odors from the kitchen as when chopping onions near the fan.

CARE AND CLEANING OF

VENTILATION SYSTEM

THE

• Air Grille: The air grille lifts off easily.

Wipe clean or wash in dishwasher or sink with mild household detergents. To prevent scratching the surface, do not use abrasive cleaners or scrubbing pads.

• Filter: Turn off ventilation system before

removing. The filter is a permanent type and should be cleaned when soiled. Clean in sink with warm water and detergent or in dishwasher.

AIR FILTER

opening. The bottom should rest against the right side of the vent chamber at the bottom. (Note: If filter is flat against

the fan wall, ventilation effectiveness is reduced.)

• Ventilation Chamber: This area, which

houses the filter, should be cleaned in the event of spills or whenever it becomes coated with a film of grease. It can be cleaned with paper towel, damp cloth, or sponge and mild household detergent or cleanser.

NOTE: The oven vent is located under the right side of the air grille. When using or cleaning the oven, hot and moist air may be noticed in this area. When oven is in use, the vent and surrounding areas become hot enough to cause burns. Be careful not to spill anything into this vent.

The air grille must be removed before the self-clean cycle.

VENTILATION

SYSTEM

The built-in ventilation system removes cooking vapors, odors and smoke from foods prepared on your cooktop.

• To operate the ventilation system manually, push the Vent Fan pad located on the electronic control. Push once for high, push again for low and again to turn the fan off.

➞

IMPORTANT: DO NOT OPERATE SYSTEM WITHOUT FILTER. Filter should al-

ways be placed at an angle. As you face the front of the range, the top of the filter should rest against the left side of the vent

OVEN COOKING

The electronic control is designed for ease in programming. The display window on the control shows time of day, timer and oven functions.

CAUTION

• Be sure all packing material is removed from oven before turning on.

• Prepared Food Warning: Follow food manufacturer’s instructions. If a plastic frozen food container and/or its cover distorts, warps, or is otherwise damaged during cooking, immediately discard the food and its container. The food could be contaminated.

• Follow the manufacturer’s directions when using oven cooking bags.

• Do not use oven for storing food or cookware.

CONTROL PAD OPERATION

• Press the desired function pad.

• Press the Auto Set pad or the appropri-

ate number pad(s) to enter time or temperature.

•A beep will sound when any pad is pressed.

•A double beep will sound if a programming error occurs.

• Further instructions will scroll in display after function pads are pressed.

NOTE: The temperature or time will be automatically entered four seconds after selection.

If more than 30 seconds elapse between pressing a function pad and the Auto Set pad or number pads, the function will be canceled and the display will return to the previous display.

CONTROL OPTIONS

Several control options are indicated under the number pads on the control. Factoryset options can be changed to your preferences. See page 13 for more information.

SETTING CONTROL FUNCTIONS

CLOCK PAD

1. Press Clock pad. Indicator word TIME

will flash in the display.

2. Press the appropriate number pads for

the current time.

After a power interruption, POWER INTERRUPTION will scroll followed by SET CLOCK.

To recall the time of day when another function is showing, press Clock pad.

Clock time cannot be changed when the oven has been programmed for clock controlled cooking, self-clean or delayed selfclean.

The clock may be set to a 24-hour clock. See Control Options (12/24 Hour Clock), page 13.

TIMER PADS

The timer(s) may be set for any time period up to 99 hours and 59 minutes (99:59).

The timer(s) operates independently of any other function and can be set while another oven function is operating. THE TIMER

DOES NOT CONTROL THE OVEN.

1. Press the Timer 1 or 2 pad. TIMER 1

or 2 will flash respectively. 0HR:00 will appear in the display.

2. Press the appropriate number pads to

enter desired time.

3. TIMER 1 or TIMER 2 will be displayed. If

both timers are active, the Timer with the least amount of time left will be displayed.

EXAMPLE: To set a timer for 5 minutes, press the Timer 1 pad and the number pad 5. The control will begin countdown after a four second delay.

4. The last minute of the countdown will be

displayed in seconds.

5. At the end of the set time, “END” will be

displayed and two chimes will sound followed by one chime every 30 seconds for up to five minutes. Press the corre-

sponding Timer pad to cancel the chimes.

NOTE: The Timer reminder chimes at

the end of a set time may be changed. See Control Options (End-of-Timer Signal), page 13.

To Cancel a Set Time:

Press and hold the corresponding Timer pad for several seconds. After a slight delay the time of day will appear.

Press the Timer pad and the “0” number pad. After a slight delay the timer will be canceled.

press the appropriate number pads for the desired temperature between 100° F and 550° F.

3.When the oven turns on, a red preheat

indicator will light and the bake icon will be displayed.

PREHEAT

INDICATOR

4.A single chime will indicate the oven is

preheated to the set temperature. The preheat indicator will turn off.

5.When cooking is complete, press Cancel pad. Remove food from oven.

BAKE ICON

CONVECT BAKE PAD/

ONVECT ROAST PAD

1. Press Convect Bake or Convect Roast pad.

2. Press again for 325° F or press the Auto Set pad. Each additional press of Auto Set will raise the temperature 25° F.

Or, press the appropriate number pads for the desired temperature between 100° F and 550° F.

3. When the oven turns on, a red preheat indicator will light and the convect icon will be displayed.

4. A single chime will indicate the oven is preheated to the set temperature. The preheat indicator will turn off.

5. When cooking is complete, press Cancel pad. Remove food from oven.

CANCEL PAD

Use to cancel all programming except the Clock and Timer functions.

AUTO SET PAD

Use with function pads to automatically set:

• 350° F bake temperature

• 325° F convect bake or roast temperature

• hi or lo broil

• three hours of cleaning time

• 140° F drying temperature

• 160° F probe temperature

• 170° F keep warm temperature

• quick or standard bread proofing

• to change control options

BAKE PAD

Use for baking and roasting.

1.Press Bake pad.

2.Press again for 350° F or press the Auto Set pad. Each additional press of Auto Set will raise the temperature 25° F. Or,

NOTES:

BAKING

• When the oven is set to preheat for regular baking (either standard or quick preheat), the convect fan will operate during the preheat period. When the oven reaches the selected temperature, the convect fan will shut off. This is normal operation.

• To recall the set temperature during preheat press the Bake pad.

• To change oven temperature during cooking, press the Bake pad and the appropriate number pads.

• Allow 10-12 minutes for the oven to preheat.

• Do not use temperatures below 140° F to keep food warm or below 200° F for cooking. For food safety reasons, lower temperatures are not recommended.

• For additional baking and roasting tips, refer to the “Cooking Made Simple” booklet.

CONVECT BAKING AND ROASTING

• Convect Bake function cycles both the

bake and broil elements along with the convection fan at a low speed.

• As a general rule, when convection

baking, set the oven temperature

F lower than the conventional

25 recipe or prepared mix directions. Baking time will be the same to a few minutes less than directions.

Convect Roast function cycles both

the bake and broil elements along with the convection fan at a high speed.

• When roasting meat using the con-

vection setting, roasting times may be up to 30% less. (Use conventional

roasting temperatures.)

• See roasting chart in “Cooking Made Simple” booklet for recommended roasting temperature and times, and additional baking and convection cooking tips.

• The convection fan will stop whenever the oven door is opened.

OVEN COOKING, CONT.

BROIL PAD

Use for top browning or broiling. For best results, use the broiler pan provided with your range.

1. Press the Broil pad.

2. Press the Auto Set pad for hi broil,

press again for lo broil, or press the appropriate number pads to set desired broil temperature between 300° and 550° F.

3. For optimal broiling, preheat three to

four minutes or until the broil element is red.

4. Place food in oven leaving the oven door

open to the first stop position (about four inches).

5. Follow broiling recommendations in “Cooking Made Simple” booklet.

6. When broiling is complete, press Cancel pad. Remove food and broiler pan

from oven.

COOK TIME/STOP TIME PADS (CLOCK CONTROLLED

OVEN COOKING)

Use to program the oven to start and stop automatically. Cook time may be set for up to 11 hours and 59 minutes (11:59). The clock must be functioning and correctly set for this feature to work.

TO START IMMEDIATELY AND TURN OFF AUTOMATICALLY:

1. Press Cook Time pad. COOK TIME

will flash. Press the appropriate number pads to enter cooking time in hours and minutes.

2. Press the Bake or Convect Bake or

Convect Roast pad and select the

temperature. COOK TIME will be displayed along with the temperature.

3. One minute before the end of the pro-

grammed cook time, the oven light will turn on. The light will turn off automatically when Cancel pad is pressed or after oven door is opened and closed.

4. At the end of cook time, the oven will

shut off automatically, "End" and COOK TIME will be displayed and three chimes will sound.

5.Press Cancel pad. Remove food from

oven. If the program is not canceled, there will be two reminder chimes every minute for up to 30 minutes.

NOTE: The Cook Time/Stop Time reminder chimes may be changed. See Control Options (End-of-Cook-Time Signal), page 13.

TO DELAY THE START OF COOKING AND TURN OFF AUTOMATICALLY:

1. Press Cook Time pad. COOK TIME

will flash. Press the appropriate number pads to enter cooking time in hours and minutes.

2. Press the Bake or Convect Bake or Convect Roast pad and select the

temperature. COOK TIME will be displayed along with the temperature.

3. Press Stop Time pad. Display shows when the oven will stop based on an immediate start.

NOTES:

BROILING

• Hi broil is used for most broiling. Use lo broil when broiling longer cooking foods to allow them to cook to well done stage without excessive browning.

• A cooling fan will automati-

cally turn on during broiling. If it does not operate, contact an authorized servicer.

• Never cover broiler pan insert with aluminum foil. This prevents fat from draining to the pan below.

4. Press Stop Time pad again. STOP TIME must be flashing to set the delay start time.

5. Press the appropriate number pads to

enter the time you want the oven to stop.

6. DELAY will be displayed.

7. At the end of the delay period, BAKE and

COOK TIME will be displayed along with the temperature.

8. Follow steps 3-5 in preceding section.

QUICK PREHEAT PAD

Use to decrease preheating time when using the Bake or Convect Bake pad. Use for all foods when baking on one rack.

• Press the Bake or Convect Bake pad

and select the temperature.

• Press the Quick Preheat pad. QUICK

PREHEAT - 1 RACK BAKING will scroll twice and then PREHEATING will be displayed.

TO RETURN TO STANDARD PREHEAT:

• Press Quick Preheat pad again. This

will provide standard preheat and the display will scroll STANDARD PREHEAT.

• Expect broil times to be longer and browning to be slightly lighter if appliance is installed on a 208 volt circuit.

CLOCK CONTROLLED OVEN COOKING

• Highly perishable foods such as dairy products, pork, poultry or seafood are not recommended for delayed cooking.

• Clock controlled baking is not recommended for baked items that require a preheated oven, such as cakes, cookies and breads.

KEEP WARM PAD

For safely keeping foods warm or for warming breads and plates.

1. Press Keep Warm pad.

2. Press Auto Set pad for 170° F or press

the appropriate number pads for temperatures between 145° and 190° F.

3. KEEP WARM and the temperature se-

lected will be displayed when the function is active.

BREAD PROOFING PAD

For proofing or allowing yeast based bread products to rise prior to baking. There are two proofing methods available – STANDARD and QUICK.

Standard Proofing in the oven protects dough from room temperature changes or drafts that commonly affect proofing done on the countertop.

Quick Proofing provides faster proofing results than countertop or standard proofing, without harming the yeast.

1. Press Bread Proofing pad.

2. Press the Auto Set pad for Standard

Proof, press again for Quick Proof.

3. When proofing is complete, press the Cancel pad.

4. When warming is complete, press Cancel pad. Remove food from the oven.

MEAT PROBE PAD

To roast and bake items to the desired temperature without over or under cooking.

1. Insert the probe into the food item. (For meats, the probe tip should be located in the center of the thickest part of the meat and not into the fat or touching a bone.)

2. Insert the probe plug into the receptacle located on the top right of the oven. Be certain to insert plug into the receptacle all the way. The control will read PRESS PROBE PAD.

3. Press Probe Pad.

4. Set the desired internal temperature of

the food by pressing Auto Set pad for 160° F or press the appropriate number pads for temperature between 100° and 185° F.

5. Press the Bake, Convect Bake, or Convect Roast pad. Press the appro-

priate number pads for the desired temperature between 100° and 550° F.

6. When the probe has reached the set temperature, the oven will shut off, “END” will be displayed and four chimes will sound followed by one chime every minute for one hour or until the Cancel pad is pressed.

NOTES:

QUICK PREHEAT

• For optimum baking and browning results, Quick Preheat is not recommended when baking on multiple racks.

• For best results, use rack positions 2 or 3 when using the Quick Preheat option.

KEEP WARM

•For optimal food quality, oven cooked foods should be kept warm for no longer than 1 to 2 hours.

• For optimal food quality and color, foods cooked on the range top should be kept warm for an hour or less.

• To keep foods from drying, cover loosely with foil or a lid.

• TO WARM DINNER ROLLS:

- cover rolls loosely with foil and

place in oven.

- press Keep Warm and Auto Set

pads.

- warm for 12-15 minutes.

• TO WARM PLATES:

- place 2 stacks of up to four plates

each in the oven.

- press Keep Warm and Auto Set

pads.

- warm for five minutes, turn off the

oven and leave plates in the oven for 15 minutes more.

- use only oven-safe plates, check with the manufacturer.

- do not set warm dishes on a cold surface as rapid temperature changes could cause crazing.

MEAT PROBE

• The probe must be removed from the oven when it is not being used.

• Because of the excellent insulation of the oven, the retained heat continues to cook the food after the signal has sounded and the oven has cycled off. For this reason it is important to remove the food from the oven as soon as the signal sounds.

• Use the handle of the probe for inserting and removing. Do not pull on the cable. Use a potholder to remove

since probe becomes hot.

• For frozen meats, insert probe after 12 hours of roasting.

• To clean cooled probe, wipe with a soapy dishcloth. Do not submerge

probe in water or wash in the dishwasher.

BREAD PROOFING

• For any dough that requires one rise, either Standard or Quick Proofing can be used.

• For dough requiring two rises, Standard Proofing must be used for the first rising period. Either Standard or Quick Proofing can be used for the second rise.

OVEN COOKING, CONT.

RYING PAD

For drying fruits, vegetables, herbs, etc. Use a drying rack for best results. It allows air to circulate evenly around the foods.

1. Press the Drying pad.

2. Press the Auto Set pad for 140° F or

press the appropriate number pads for the desired drying temperature between 100° and 200° F.

3. The oven door needs to be opened

slightly to allow moisture to escape from the oven during the drying process.

• Open the oven door slightly.

• Place the magnetic door spacer (Part No. 8010P146-60) over the plunger switch at the upper right side of the oven frame. The spacer provides a gap between the oven frame and the oven door allowing moisture to escape.

NOTES:

DRYING

• To purchase a drying rack, contact

• Most fruits and vegetables dry well

• The length of drying times vary due to

• Check foods at the minimum drying

• More than one rack of food may be

your Jenn-Air dealer for the “DRYINGRACK” Accessory Kit or call 1-800-688-8408.

and retain their color when dried at 140° F. For optimal flavor, dry herbs at 100° F, however, at this lower temperature expect extended drying times of up to 8 hours.

the following: water and sugar content of food, size of food pieces, amount of food being dried, humidity in the air.

time. Dry longer if necessary.

dried at the same time. However, additional drying time is needed.

• Fruits that turn brown when exposed to air should be treated with an antioxidant. Try one of the following methods:

1. Dip fruit in a mixture of two parts

bottled lemon juice to one part cool water.

2. Soak fruit in a solution of 1 tsp.

ascorbic acid or commercial antioxidant to 1 quart of cold water.

• Foods may drip during the drying process. After drying high acid or sugary foods, clean the oven bottom with soap and water. The porcelain oven finish may discolor if acid or sugary food soils are not wiped up prior to high heat or a self-cleaning cycle.

• Refer to other resources at your local library or call your local County Extension service for additional information.

• Gently close the door until the spacer magnet makes contact with the oven door. The magnet will hold the spacer in the proper position during the drying process and allows the door to be opened at any time during drying without losing proper positioning.

NOTE: If the spacer is not placed correctly, the convection fan will not operate.

Follow the drying guide on page 12 for drying times. Cool foods to room temperature before testing for doneness.

4. When drying is complete, turn the oven off by pressing the Cancel pad. Using a potholder, remove the magnetic spacer.

NOTE: Please keep the magnetic spacer in a safe and convenient place for easy access. To replace, call 1-800-688-8408 to order Part No. 8010P146-60.

DRYING GUIDE

Approx.

Fruits Varieties Best for Drying Preparation Drying Time Test for Doneness

at 140

F **

Apples* Firm varieties: Graven Wash, peel if desired, core and slice 4-8 hours Pliable to crisp. Dried

Stein, Granny Smith, into 1/8” slices. apples store best when they Jonathan, Winesap, are slightly crisp.

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

Apricots* Blenheim/Royal most Wash, halve, and remove pits. 18-24 hours Soft, pliable.

Bananas* Firm varieties Peel and cut into 1/4” slices. 17-24 hours. Pliable to crisp.

Cherries Lambert, Royal Ann, Wash and remove stems. Halve and 18-24 hours. Pliable and leathery.

Nectarines Freestone varieties Halve and remove pits. Peeling is 24-36 hours Pliable and leathery. and Peaches* optional but results in better-looking

Pears* Bartlett Peel, halve and core. 24-36 hours Soft and pliable.

Pineapple Fresh or canned Wash, peel and remove thorny eyes. Canned: Soft and pliable.

Orange and Select rough-skinned fruit. Wash well. Thinly peel the outer 1/16 1-2 hours Tough to brittle. Lemon Peel Do not dry the peel of fruit to 1/8” of the peel. Do not use the

Rome Beauty, Newton

common. Tilton also good

Napoleon, Van or Bing remove pits.

dried fruit.

Slice length wise and remove the small 14-18 hours core. Cut crosswise into 1/2” slices. Fresh:

12-16 hours

marked “color added” white bitter pith under the peel.

Vegetables

Tomatoes Plum, Roma Halve, remove seeds. Place tomatoes 12-18 hours Tough to crisp.

skin side up on rack. Prick skins.

Carrots Danvers Half Long, Do not use carrots with woody fiber or 4-8 hours Tough to brittle.

Imperator, Red Cored pithy core. Wash, trim tops and peel if Chantenay desired. Slice crosswise or diagonally

in 1/4” slices. Steam blanch for 3 min.

Hot Peppers Ancho, Anaheim Wash, halve and seed. Prick 4-6 hours Pods should appear shriveled,

skin several times. dark red and crisp.

Herbs

Parsley, Mint, Rinse in cold water. Leave stems on 1-3 hours Brittle and crumbly. Cilantro, Sage, until leaves are dry, then discard. Oregano

Basil Cut leaves 3 to 4” from top of plant 2-5 hours Brittle and crumbly.

just as buds appear. Rinse leaves in cold water.

*Fruits requiring an antioxidant to prevent discoloration and loss of nutrients. Refer to the notes on page 11 for specific methods. ** 12 Hour Off will not occur during drying functions.

OVEN COOKING, CONT.

CONTROL OPTIONS

TO CHANGE FACTORY SET DEFAULT OPTIONS:

1. Press the Setup Options (0) pad and

the desired option pad. (See Options below.)

2. Current option will appear in the dis-

play.

3. Press the Auto Set pad to change the

option.

4. Press any function pad other than the Cancel pad to set the displayed option

and exit the program.

OPTIONS AVAILABLE:

END-OF-TIMER SIGNAL (TIMER 1 & TIMER 2)

There are three choices for the end of "timer" reminder signals.

• Two chimes (Timer 1) or four chimes

(Timer 2) followed by one chime every 30 seconds for up to five minutes (default setting).

• Two chimes (Timer 1) or four chimes

(Timer 2) followed by one chime every minute for up to 30 minutes.

• Two chimes (Timer 1) or four chimes

(Timer 2) followed by no other chimes. NOTE: The reminder signal chosen will

apply to both timers.

SOUND LEVEL (3)

The sound of the chimes may be changed with IIIIIIII(8) being the highest volume and I(1) being the lowest.

The default is set at level 6.

12/24 HOUR CLOCK (4)

The clock may be set for a 12-hour or 24-hour clock. The default is set for a 12-

hour clock.

SCROLL SPEED (5)

The scroll speed of the messages in the display may be changed from FAST to MEDIUM to SLOW. The

default is set for the medium speed.

END-OF-COOK TIME SIGNAL (6)

There are three choices for the end of "clock controlled cooking" reminder signals.

• Three chimes followed by two chimes every minute for up to 30 minutes (default setting).

• Three chimes followed by no other chimes.

• Three chimes followed by two chimes every 30 seconds for up to five minutes.

TEMP C/F (7)

The temperature scale may be changed to Centigrade or Fahrenheit. The default is set for Fahrenheit.

DISPLAY ON/OFF (CLOCK)

The time-of-day display may be shut off when the oven is not in a cooking or cleaning function.

OVEN TEMPERATURE ADJUSTMENT

If you think the oven is operating too cold or hot, you can adjust it. Bake several test items and then adjust the temperature setting not more than 10° F at a time.

TO ADJUST:

1. Press the Bake pad and enter 550° F.

2. Press and hold the Bake pad for several

seconds until TEMP ADJ is displayed.

3. Press the Auto Set pad - each press

changes the temperature by 5° F. The control will accept changes from -35° to +35° F.

4. If the oven was previously adjusted, the

change will be displayed. For example, if the oven temperature was reduced by 15° F, the display will show -15° F.

5. When you have made the adjustment,

press any function pad, OPTION CHANGED will scroll and the time of day will reappear in the display. The oven will now bake at the adjusted temperature.

NOTE: It is not recommended to adjust the temperature if only one or two recipes are in question.

CONTROL LOCK (1)

The function pads on the control can be locked to prevent unwanted use for safety and cleaning benefits.

Control Lock will not lock out the Timer, Clock or Oven Light.

12 HOUR OFF/SABBATH MODE (2)

The oven may be set to turn off after 12 hours or stay on indefinitely. The

default is set to turn off after 12 hours.

LANGUAGE (8)

The words which scroll in the display may be changed from English to French or Spanish.

DEFAULT (9)

The control can be reset to restore the factory setting for each option.

OVEN LIGHT

The oven light automatically comes on when the door is opened. When the door is closed, press the Oven Light pad on the control panel to turn the light on or off.

The oven light will come on automatically one minute before the end of a clock controlled cooking operation.

OVEN RACKS

The oven has three racks. All racks are designed with a lock-stop edge.

TO REMOVE OVEN RACKS:

Pull rack straight out until it stops at the lock-stop position; lift up on the front of the rack and pull out.

TO REPLACE OVEN RACKS:

Place rack on the rack support in the oven; tilt the front end up slightly; slide rack back until it clears the lock-stop position; lower front and slide back into the oven.

RACK POSITIONS

Three-rack Convection

Baking (Racks 1, 3 and 5)

RACK 5:

Use for toasting bread or broiling very thin foods.

RACK 4:

Use for two-rack baking and for broiling.

RACK 3:

Use for most baked goods on a cookie sheet or jelly roll pan, layer cakes, fruit pies, or frozen convenience foods, and for broiling.

MULTIPLE RACK COOKING:

Two rack: Use rack positions 2 and 4,

or 1 and 4. Three rack: For convection cooking,

use rack positions 1, 3 and 5. See illustration.

HALF RACK ACCESSORY

A half rack, to increase oven capacity, is available as an accessory. It fits in the left, upper portion of the oven and provides space for a vegetable dish when a large roaster is on the lower rack. Contact your Jenn-Air dealer for the “HALFRACK” Accessory Kit or call 1-800688-8408 to order.

RACK 2:

Use for roasting small cuts of meat, casseroles, baking loaves of bread, bundt cakes or custard pies, and two-rack baking.

RACK 1:

Use for roasting large cuts of meat and poultry, frozen pies, dessert souffles or angel food cake, and two-rack baking.

COOLING FAN

The cooling fan will automatically turn on during cleaning, broiling and some baking operations. It is used to keep internal parts on the control panel cool. The fan will automatically turn off when parts have cooled. The fan may continue to operate after the oven has been turned off. This is normal.

CARE & CLEANING

CLEAN PAD

Use to set a self-clean cycle or a delayed selfclean cycle. One press of the Clean pad sets up an immediate clean cycle. A second press of the Clean pad sets up a delayed clean cycle.

• Clean oven frame, door frame (area outside of gasket) and around the opening in the door gasket with a nonabrasive cleaner such as Bon Ami*. These areas are not exposed to cleaning temperatures.

• Remove oven racks. If racks are left in during a clean cycle, it may impair function and they will discolor. Turn off the oven light and close door.

TO SET FOR IMMEDIATE START:

1. Press Clean pad once.

2. Press the Auto Set pad for 3 hours of

cleaning time, press again for 4 hours and again if 2 hours of clean time is desired.

3. CLEANING and LOC plus the clean time will appear in the display.

4. When the clean cycle is complete, CLEANED will be displayed. LOC will remain on until the oven has cooled (approx. 1 hour).

5. When the oven is cool, LOC will no longer be displayed and the door may be opened.

6. Wipe out the oven interior with a damp cloth. If soil remains it indicates the cycle was not long enough.

TO CANCEL SELF-CLEAN:

1. Press Cancel pad.

2. If LOC is NOT displayed, open oven

door. If LOC is displayed, allow oven to cool.

TO SET FOR DELAY START:

1. Press Clean pad twice.

2. Press the Auto Set pad to program a 2- hour delay. Each additional press of Auto

Set will add 2-hours up to a total delay of

eight hours from the current time.

3. The start time and the time of day will be

displayed during the delay period.

4. At the end of the delay period, CLEAN-

ING, LOC and the clean time will appear in the display.

5. Follow steps 4-6 in preceding section.

NOTES:

• To prevent damage to oven door, do not attempt to open either oven door when the LOC indicator word is displayed.

• During the cleaning process, the kitchen should be well ventilated to help eliminate normal odors associated with cleaning. Odors will lessen with use.

• It is normal for flare-ups, smoking or flaming to occur during cleaning if the oven is heavily soiled. It is better to clean the oven regularly rather than to wait until there is a heavy buildup of soil.

• Wipe up excess grease or spillovers to prevent flare-ups. For ease in cleaning, the bake element in the oven can be lifted slightly (1 inch).

• It is normal for parts of the range to become hot during a clean cycle. Avoid touching cooktop, door, window or oven vent area during a clean cycle.

•A cooling fan will automatically turn on during cleaning. If it does not operate, contact an authorized servicer.

• Wipe up sugary and acidic spillovers such as sweet potatoes, tomato or milk-based sauces prior to a self-clean cycle. Porcelain enamel is acid resistant, not acid proof and may discolor if spills are not wiped up before a selfclean cycle.

•A white discoloration may appear after cleaning if acidic or sugary foods are not wiped up before the clean cycle. This discoloration is normal and will NOT affect performance.

CLEANING PROCEDURES

CAUTION

• Be sure appliance is off and all parts are cool before handling or cleaning. This is to avoid damage and possible burns.

• To prevent staining or discoloration, clean appliance after each use.

• If a part is removed, be sure it is correctly replaced.

ACCESS PANEL

The access panel is easily opened or removed. To open panel, grasp upper corners and pull forward and down. To close panel, lift up and insert prongs into catches in the range.

PRONGS

• Wash with soap and water, a glass cleaner, or mild liquid sprays.

• Do not use excessive amounts of water.

• To prevent scratching or dulling of the finish, do not use mildly abrasive, abrasive, harsh or caustic cleaners such as oven cleaners.

NOTE: To avoid the possibility of accidentally disconnecting any part of the ventilation system, do not use the area behind the access panel for storage.

BROILER PAN AND INSERT

• Place soapy cloth over insert and pan; let

soak to loosen soil.

• Wash in warm soapy water. Use scour-

ing pad to remove stubborn soil.

• Broiler pan and insert can be cleaned in

dishwasher.

CLOCK AND CONTROL PAD AREA

• To activate “Control Lock” for cleaning, see page 13.

• Wipe with a damp cloth and dry.

• Glass cleaners may be used if sprayed on a cloth first. DO NOT spray directly on

control pad and display area.

• Heavy Soils or Metal Marks – Dampen

CONTROL PANEL

• Wipe with damp cloth.

• For stubborn soil, use mildly abrasive cleaning agents such as Bon Ami*. Do NOT use abrasive cleaners such as steel wool pads or oven cleaners. These products will permanently damage the surface.

CONTROL KNOBS

• Remove knobs in the OFF position by pulling forward.

• Wash, rinse and dry. Do not use abrasive cleaning agents as they may scratch the finish.

• Turn on each element to be sure the knobs have been correctly replaced.

• Burned-on or Crusty Soils – Scrub

COOKTOP – GLASS-CERAMIC

Never use oven cleaners, chlorine bleach, ammonia or glass cleaners with ammonia. NOTE: Call an authorized servicer if the glass-ceramic top should crack, break or if metal or aluminum foil should melt on the cooktop.

• Allow the cooktop to cool before cleaning.

• General – Clean cooktop after each use,

or when needed, with a damp paper towel and Cooktop Cleaning Creme* (Part No.

20000001)**. Then, buff with a clean dry cloth.

• Melted Sugar or Plastic – Immediately

NOTE: Permanent stains will develop if soil is allowed to cook on by repeatedly using the cooktop when soiled.

a “scratchless” or “never scratch” scrubber sponge. Apply Cooktop Cleaning Creme* (Part No. 20000001)** and scrub to remove as much soil as possible. Apply a thin layer of the creme over the soil, cover with a damp paper towel and let stand 30 to 45 minutes (2-3 hours for very heavy soil). Keep moist by covering the paper towel with plastic wrap. Scrub again, then buff with a clean dry cloth.

NOTE: Only use a CLEAN, DAMP “scratchless” pad that is safe for non-stick cookware. The pattern and glass will be damaged if the pad is not damp, if the pad is soiled, or if another type of pad is used.

with a “scratchless” or “never scratch” scouring pad and Cooktop Cleaning Creme*.

NOTE: Hold a razor blade scraper at 30° angle and scrape any remaining soil. Then, clean as described above.

Do not use the razor blade for daily cleaning as it may wear the pattern on the glass.

turn element to LOW and scrape sugar or plastic from hot surface to a cool area. Then turn element OFF and allow to cool. Clean residue with razor blade scraper and Cooktop Cleaning Creme*.

COOKTOP TRIM

• General Cleaning/Heavy Soils - See

directions for glass-ceramic cooking area. Do not use razor blade on cooktop trim.

• For Difficult Stains, Minor Discol- orations or Yellowing - Gently scour using a mild-abrasive cleaner such as Soft Scrub* and a green Scotch-Brite* pad.

(Do not use Scotch-Brite pad on glassceramic surface.) Rinse and dry. Follow

with HOPE’S COUNTERTOP POLISH** to enhance the cooktop’s color and shine. Follow package directions.

• To Protect and Renew the Surface Shine - Use HOPE’S COUNTERTOP POLISH**. Follow package directions.

DOOR HANDLE – PLASTIC FINISHES

• When cool, clean with soap and water,

rinse and dry.

• Use a glass cleaner and a soft cloth.

NOTE: Never use oven cleaners, abrasive or caustic liquid or powdered cleansers on plastic finishes. These cleaning agents will scratch or mar finish.

NOTE: To prevent staining or discoloration, wipe up fat, grease or acid (tomato, lemon, vinegar, milk, fruit juice, marinade) immediately with a dry paper towel.

OVEN WINDOW & DOOR – G

LASS

• Avoid using excessive amounts of water

which may seep under or behind glass causing staining.

• Wash with soap and water. Rinse with

clear water and dry. Glass cleaner can be used if sprayed on a cloth first.

• Do not use abrasive materials such as

scouring pads, steel wool or powdered cleaners as they will scratch glass.

* Brand names for cleaning products are registered trademarks of the respective manufacturers. ** To order direct, call 1-800-688-8408.

CARE & CLEANING, CONT.

OVEN INTERIORS

• Follow instructions on page 15 to set a self-clean cycle.

OVEN RACKS

• Clean with soapy water.

• Remove stubborn soil with cleansing powder or soap-filled scouring pad. Rinse and dry.

• If over time, racks do not slide out easily, wipe the rack edge and rack support with a small amount of vegetable oil to restore ease of movement, then wipe off excess oil. Likewise, place one drop of vegetable oil on rack guides.

NOTE: Remove oven racks during a clean cycle. If racks are left in the oven, it may impair function and they will discolor.

STAINLESS STEEL (SELECT MODELS)

• DO NOT USE ANY CLEANING

PRODUCT CONTAINING CHLORINE BLEACH.

• ALWAYS WIPE WITH THE GRAIN

WHEN CLEANING.

• Daily Cleaning/Light Soil –– Wipe

with one of the following - soapy water, white vinegar/water solution, Formula 409 Glass and Surface Cleaner* or a similar glass cleaner - using a sponge or soft cloth. Rinse and dry. To polish and help prevent fingerprints, follow with Stainless Steel Magic Spray (Jenn-Air Model A912, Part No. 20000008)**.

• Moderate/Heavy Soil –– Wipe with

one of the following - Bon Ami, Smart Cleanser, or Soft Scrub* - using a damp sponge or soft cloth. Rinse and dry. Stubborn soils may be removed with a damp Scotch-Brite* pad; rub evenly with the grain. Rinse and dry. To restore luster and remove streaks, follow with Stainless Steel Magic Spray*.

• Discoloration –– Using a damp sponge

or soft cloth, wipe with Cameo Stainless Steel Cleaner*. Rinse immediately and dry. To remove streaks and restore luster, follow with Stainless Steel Magic Spray*.

* Brand names for cleaning products are registered trademarks of the respective manufacturers. ** To order direct, call 1-800-688-8408.

MAINTENANCE

ANTI-TIP BRACKET

LEVELING LEG

OVEN DOOR

CAUTION

• NEVER place excessive weight on

or stand on an open oven door. This could cause the range to tip over, break the door, or injure the user.

• NEVER attempt to open or close

door or operate oven until door is properly replaced.

• NEVER place fingers between hinge

and front oven frame. Hinge arms are spring mounted. If accidentally hit, the hinge will slam shut against oven frame and could injure your fingers.

TO REMOVE:

1. When cool, open the oven door to the

broil stop position (opened about four inches).

2. Grasp door at

each side. Do not use the door handle to lift door.

3. Lift up evenly until door clears hinge

arms.

TO REPLACE:

1. Grasp door at each side.

2. Align slots in the door with the hinge

arms on the range.

3. Slide the door down onto the hinge

arms until the door is completely seated on the hinges. Push down on the top corners of the door to completely seat door on hinges. Door should not appear crooked.

NOTE: The oven door on a new range may feel “spongy” when it is closed. This is normal and will decrease with use.

LEVELING LEGS

• Be sure the anti-tip bracket secures one of the rear leveling legs to the floor. This bracket prevents the range from accidentally tipping.

The range should be leveled when installed. If the range is not level, turn the plastic leveling legs, located at each corner of the range, until range is level.

ANTI-TIP BRACKET

LEVELING LEG

OVEN WINDOW

TO PROTECT THE OVEN DOOR WINDOW:

1. Do not hit the glass with pots, pans,

furniture, toys, or other objects.

2 Do not close the oven door until the

oven racks are in place.

Scratching, hitting, jarring or stressing the glass may weaken its structure causing an increased risk of breakage at a later date.

OVEN LIGHT

To assure the proper replacement bulb is used, order bulb from Maytag Customer Service. Call 1-800-688-8408, ask for part number 74004458 - halogen bulb.

CAUTION

• Disconnect power to range before replacing light bulb.

• Allow oven to cool before replacing light bulb.

• Make sure bulb cover and bulb are cool before touching.

TO REPLACE OVEN LIGHT BULB:

1. When oven is cool, use fingertips to grasp

edge of bulb cover. Pull out and remove.

2. Carefully remove old bulb by pulling straight out of ceramic base.

3. To avoid damaging or decreasing the life

of the new bulb, do not touch the bulb with bare hands or fingers. Hold with a cloth or paper towel. Push new bulb prongs straight into small holes of ceramic base.

4. Replace bulb cover by snapping into place.

5. Reconnect power to the range. Reset

clock.

BEFORE YOU CALL FOR SERVICE

FOR MOST CONCERNS, TRY THESE

FIRST

• Check if oven controls have been properly set.

• Check to be sure plug is securely inserted into receptacle.

• Check or re-set circuit breaker. Check or replace fuse.

• Check power supply.

PART OR ALL OF APPLIANCE DOES

NOT

WORK.

NOTE: On Canadian models, some or all of the glass-ceramic cooking surface will not operate during a self-clean cycle.

• Check if surface and/or oven controls have been properly set. See pgs. 4 & 7.

• Check if oven door is unlocked after selfclean cycle. See pg. 15.

• Check if oven is set for a delayed cook or clean program. See pgs. 9 & 15.

• Check if Control Lock is activated. See pg.

13.

BAKING RESULTS ARE NOT AS

EXPECTED PREVIOUS

• Make sure the oven vent has not been blocked. See pg. 6 for location.

• Check to make sure range is level.

• Temperatures often vary between a new oven and an old one. As ovens age, the oven temperature often “drifts” and may become hotter or cooler. See pg. 13 for instructions on adjusting the oven temperature. NOTE: It is not recommended to adjust the temperature if only one or two recipes are in question.

• Check that oven temperature is decreased by 25° F when convect baking.

• See “Cooking Made Simple” booklet for more information on bakeware and baking.

OR DIFFER FROM

OVEN.

FOOD IS NOT BROILING PRO-

PERLY OR SMOKES EXCESSIVELY.

• Check oven rack positions. Food may be

• Broil element was not preheated.

• Aluminum foil was incorrectly used. Never

• Oven door was closed during broiling.

• Trim excess fat from meat before broiling.

•A soiled broiler pan was used.

OVEN WILL NOT SELF-CLEAN.

• Check to make sure the cycle is not set for

• Check if door is closed.

OVEN DID NOT CLEAN PROPERLY.

• Longer cleaning time may be needed.

• Excessive spillovers, especially sugary and/

OVEN DOOR WILL NOT UNLOCK

AFTER

• Oven interior is still hot. Allow about one

VENTILATION FAN DOES NOT

OPERATE ON

• Check behind lower access panel if power

VENTILATION SYSTEM IS NOT

CAPTURING

• Check on cross ventilation in room or

• Outside wall cap may be trapped shut.

• Range may be improperly installed; check

• Air filter may be improperly installed. See

too close to element.

line the broiler insert with foil.

Leave the door open to the first stop position (about 4 inches).

a delayed start. See pg. 15.

or acidic foods, were not removed prior to the self-clean cycle.

SELF-CLEAN CYCLE.

hour for the oven to cool after the completion of a self-clean cycle. The door can be opened when the LOC indicator word is not displayed.

BUT EVERYTHING ELSE

THE RANGE DOES.

cord to blower assembly has been disconnected (See pg. 15).

SMOKE EFFICIENTLY.

make up air.

ducting information. See pg. 3.

pg. 6.

MOISTURE COLLECTS ON OVEN

WINDOW OVEN

• This is normal when cooking foods high in moisture.

• Excessive moisture was used when cleaning the window.

OR STEAM COMES FROM

VENT.

THERE IS A STRONG ODOR OR

LIGHT TURNED

• This is normal for a new range and will

• Turning on the ventilation fan will help

• Excessive food soils on the oven bottom.

SMOKE WHEN OVEN IS

ON.

disappear after a few uses. Initiating a clean cycle will “burn off” the odors more quickly.

remove the smoke and/or odor.

Use a self-clean cycle.

A FAN SOUND CAN BE HEARD

• This is the cooling fan and is normal. The fan will continue to run after use until the oven cools.

“F” PLUS A NUMBER AND THE

MESSAGE RIZED SERVICER OR 800-688-

1100.”

• This is called a fault code. If a fault code appears in the display and beeps sound, press the Cancel pad. If the fault code and beeps continue, disconnect power to the appliance. Wait a few minutes, then reconnect power. If fault code and beeps still continue, disconnect power to the appliance and call an authorized servicer.

• If the oven is heavily soiled, excessive flareups may result in a fault code during a clean cycle. Press Cancel pad and allow the oven to cool completely, wipe out the excess soil, then reset the clean cycle. If the fault code and beeps still continue, disconnect power to the appliance and call an authorized servicer.

: “CALL AN AUTHO-

+ 44 hidden pages