JENN-AIR JES8850AAB, JES8850AAQ, JES8850AAS, JES8850AAW Dimension Guide

www.dexpress.com DIMENSION EXPRESS Fax on Demand [phone]

This Data Sheet Includes Information On

Jenn-Air

• Product Model Number (s): •

Slide In Electric Ranges:

JES8850AAS, JES8850AAB, JES8850AAW and

JES8850AAQ

29 7/8"

26 3/16"

• Dimensions (Actual Size) •

Width:

29 7/8"

Depth:

26 3/16"

Height:

Door swing:

Height at full leg adjustment:

Height at 0" leg adjustment:

• Additional Information •

• Units depth including door handle is 28 3/8".

• Can be installed with the back against (0") a vertical

combustible wall if equipped with optional backguard
kit, and the sides below the cooktop surface against
(0") combustible base cabinets.

• Electrical requirements: 120/240 or

120/208VAC,60Hz. 40 or 50 amp grounded circuit
protection is required.

• Proper operation requires use of range hood.

• Cabinetry over cooktop : 30" minimum clearance

between the top of the cooking surface and the bottom
of an unprotected wood or metal cabinet. 24" minimum
when bottom of wood or metal cabinet is protected by
not less than 1/4" flame retardant millboard covered
with not less than no. 28 MSG sheet steel, 0.015"
stainless steel, 0.024" aluminum or copper.

• To eliminate the hazard of reaching over heated

surface units, cabinet storage space located above
the surface units should be avoided. If cabinet storage
is to be provided, the hazard can be reduced by
installing a range hood that projects horizontally a
minimum of 5" beyond the bottom of the cabinets.

• For Free-standing installations a slide-in range with

side panels measures 30 3/4" wide. The height of the
countertop is 36" and countertop depth is 25".

• Island or peninsula installations with 24" deep base

cabinets must use flush back (no rear toe space)
cabinets to avoid range interference,. If rear toe space
is desired, use 27" or deeper cabinets.

See page 2 for additional information

Subject to change without notice. This system is designed to
be updated daily if necessary. Dimension Express is not
responsible for use of superseded, voided, or outdated data
sheets. Because of the difficulty or impracticability of deter­mining actual damages, liability of Dimension Express shall
not exceed $50.00.
Copyright © Dimension Express, 2002.

• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at [phone] •
notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.

35 3/4"
20 1/2"
36 7/16"
35 3/4"

174

35 3/4"

Wall View

(not to scale)

Wall View

(not to scale)

18"

36"

Countertop

height

5 1/2"

30" Min.

10"

30"

Range

20 1/2"

Locate electrical
supply junction
box or 60" of
electrical cable
within shaded
area.

19"

Upper cabinets
can only be 13"
deep maximum.
Over range
cabinet is NOT
recommended.

Minimum horizontal clearance
between the edge of the
appliance and combustible

3"

construction extending from
the cooking surface to 18"
above the cooking surface is
3" to the sides and 0" to the
back (see solid areas). 6"
Minimum is recommended.

30" Minimum cutout width

BN220.55 • A174B149 • • 032603 • 95659 • 86392

(not to scale)

5 1/2"

2 1/4"

www.dexpress.com

DIMENSION EXPRESS

Fax on Demand [phone]

Additional Information:

• Some European style cabinets are equipped with vinyl drawer and

door fronts. The vinyl may not be designed to withstand the heat
produced by the normal operation of the self cleaning range.
Discoloration or delamination may occur. To avoid possible damage,
Maytag recommends increasing the 30" cabinet opening to 31 1/4"
minimum and using a heat shield kit #CABKIT V. The countertop
cutout must remain 30".

Page 2

This Data Sheet Includes Information On

Jenn-Air

• Product Model Number (s): •

Slide In Electric Ranges:

JES8850AAS, JES8850AAB, JES8850AAW and

JES8850AAQ

Kits:

• UXA9007ABB/Q/W: side panels.

• JXA9112AAP: Backsplash.

• JXA9130AAP: Backsplash.

When replacing an existing unit, a
maximum depth of 23 1/2" is acceptable.

36"

countertop height

You may need to
shave or cut the trim of
formed or metal front
edged countertops to
clear the 30 3/4" width
of cooktop.

Cutout opening

Slide-in installation

(not to scale)

23 1/4"

Recommended.

From countertop

front to rear cutout

30"

Cabinet opening

30" countertop

opening

23 5/8"

minimum

flat area

25" Normal

countertop depth

24"

Cabinet depth

Subject to change without notice. This system is designed to be updated daily if necessary. Dimension Express is not responsible for use of superseded, voided, or
outdated data sheets. Because of the difficulty or impracticability of determining actual damages, liability of Dimension Express shall not exceed $50.00.
Copyright © Dimension Express, 2002.

• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at [phone] •
notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.

BN220.55 • A174B149 • • 032603 • 95659 • 86392

149