Jenn-Air JEC4430BB User Manual
JENN-AIR® DETAILED PLANNING DIMENSIONSJENN-AIR® DETAILED PLANNING DIMENSIONS
A
B
A
C
F
E
D
A
B
30" ELECTRIC RADIANT COOKTOP WITH ELECTRONIC TOUCH CONTROL
JEC4430BS – 31" x 55⁄16" x 223⁄16"
JEC4430BB – 307⁄8" x 55⁄16" x 2111⁄16"
PRODUCT DIMENSIONS
1 of 3
TOP VIEW
FRONT VIEW
A
MODEL # JEC4430B
in cm
Overall width
Euro-Style Stainless (including trim)
A
B
Floating Glass 307⁄8 78.4
Overall depth
Euro-Style Stainless (including trim)
B
31
78.7
223⁄16 56.4
Floating Glass 2111⁄16 55 .1
Width of recessed cooktop 2815⁄16 73.5
C
Height of recessed cooktop 33⁄4 9.6
D
Height of recessed cooktop including conduit 55⁄16 13.5
E
A
F
D
E
Height of cooking surface
Euro-Style Stainless
F
Floating Glass
Depth of recessed cooktop 201⁄4 51. 5
G
5
⁄16
1
⁄4 0.6
0.8
C
B
E
G
SIDE VIEW
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
85 60CdZ w815
JENN-AIR® DETAILED PLANNING DIMENSIONSJENN-AIR® DETAILED PLANNING DIMENSIONS
D* G
E
A
B
B
C
e
F
Side
Cabinet
G
BB
H
Side
Cabinet
30" ELECTRIC RADIANT COOKTOP WITH ELECTRONIC TOUCH CONTROL
JEC4430BS – 31" x 55⁄16" x 223⁄16"
JEC4430BB – 307⁄8" x 55⁄16" x 2111⁄16"
2 of 3
OPENING/CLEARANCE DIMENSIONS
A
D*
F
e
C
FRONT VIEW
MODEL # JEC4430B
in cm
Width of combustible area above
A
cooking surface (min.)
Width from cooktop to fixed wall or
B
other combustible material (min.)
Width to outer edge of outlet (max.) 9 23.0
C
Height to bottom of uncovered wood or
D*
metal cabinet above cooking surface (min.)
Height to bottom of uncovered wood or
E
metal cabinet (min.)
E
Height to top edge of outlet (min.) 7 17.8
F
Depth of upper cabinet 13
G
Depth from cutout to wall (min.) 1 2.5
H
Width of cutout (recommended) 291⁄2 74.9
I
Depth of cutout (recommended) 201⁄2 52.0
J
Depth from cutout to front of countertop 25⁄8 6.7
K
e
Recommended electrical access location
* Dimension can be reduced by 6" (15.2 cm) when bottom of wood or metal
cabinet is covered by not less than 1⁄4" (0.6 cm) flame retardant millboard
covered with not less than No. 28 MSG sheet metal, 0.015" (0.4 mm)
stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
If installing a hood or microwave hood combination above the cooktop,
follow the hood or microwave hood combination instructions for
dimensional clearances above the cooking surface.
30 76.2
1 2.5
30
76.2
18 45.7
33.0
ELECTRICAL REQUIREMENTS
A 3-wire or 4-wire, single phase, 120/240 volt, 60 Hz., AC only electrical
supply is required on a separate, 40-amp circuit fused on both sides of
the line. 48" (121.9 cm) of 1⁄2" (1.3 cm) I.D. flexible cable is provided.
LOCATION REQUIREMENTS
• To ensure cooktop base clearance, cabinet side walls need to be wider
Side
Cabinet
G
H
than the cutout.
• If cabinet has a drawer, allow a 51⁄2" (14.0 cm) minimum clearance
between countertop and top of drawer.
COOKTOP OVER SINGLE WALL OVEN INSTALLATION
REQUIREMENTS
• For approved model number combinations, refer to the under counter
label on the bottom of the cooktop burner box.
• To install a cooktop over a single wall oven, refer to page 3.
I
TOP VIEWSIDE VIEW
H
J
K
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
85 60CdZ w815
Loading...