Jenn-Air JEC4424HB01 Installation Guide

ELECTRIC COOKTOP

IMPORTANT:

IMPOR

À conserver pour consultation par l'inspecteur local des installations électriques.

INSTALLATION INSTRUCTIONS

INSTRUCTIONS D’INSTALLATION DE LA TABLE

DECUISSON ÉLECTRIQUE

Table of Contents/Table des matières

COOKTOP SAFETY ........................................................................2

INSTALLATION REQUIREMENTS .................................................2

Tools and Parts .............................................................................2

Location Requirements ................................................................2

Electrical Requirements ...............................................................4

INSTALLATION INSTRUCTIONS ...................................................5

Prepare Cooktop for Installation ..................................................5

Install Cooktop .............................................................................5

Make Electrical Connection .........................................................7

Attach Cooktop to Countertop ....................................................9

Complete Installation ...................................................................9

SÉCURITÉ DE LA TABLE DE CUISSON .....................................10

EXIGENCES D’INSTALLATION ...................................................10

Outils et pièces ...........................................................................10

Exigences d’emplacement .........................................................10

Spécications électriques ..........................................................12

INSTRUCTIONS D’INSTALLATION .............................................14

Préparation de la table de cuisson pour l’installation ................14

Installation de la table de cuisson ..............................................14

Raccordement électrique ...........................................................16

Fixation de la table de cuisson au plan detravail......................18

Achever l’installation ..................................................................18

ve for local electrical inspector's use.

TANT :

W11236401B

COOKTOP SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

You can be killed or seriously injured if you don't immediately

DANGER

WARNING

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

follow instructions.

You

can be killed or seriously injured if you don't

instructions.

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools needed

■ Tape measure

■ 1/4" (6.3 mm) nut driver

Parts supplied

■ Foam strip roll

■ Clamping brackets (2)

Parts needed

■ A UL listed or CSA approved connector for 1/2" (1.3 cm)

diameter conduit

■ UL listed wire connectors

Check local codes. Check existing electrical supply. See the “Electrical Requirements” section.

It is recommended that all electrical connections be made by a licensed, qualied electrical installer.

■ Marker or pencil

■ Pliers

■ Flat-blade screwdriver

■ 2½" (6.4 cm) clamping

■ Screws (2)

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

When installing cooktop, use minimum dimensions given.

■ To eliminate the risk of burns or re by reaching over the

heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5" (12.7 cm) beyond the bottom of the cabinets.

■ The cooktop must be a specied cooktop that is approved

to be installed either alone or over an undercounter built-in oven. Check the cooktop base for an approved installation label. If you do not nd this label, contact your dealer to conrm that your cooktop is approved.

■ The cooktop must be installed in a level countertop.

■ Ovens approved for this type of installation will have an

approval label located on the top of the oven. If you do not nd this label, contact your dealer to conrm that your oven is approved. Refer to oven manufacturer’s Installation Instructions for approval for built-in undercounter use and proper cutout dimensions.

■ The cooktop should be installed away from strong draft

areas, such as windows, doors, fans or strong heating vents. The cooktop should be located for convenient use in the kitchen.

■ Use the countertop opening dimensions that are given

with these Installation Instructions. Given dimensions are minimum clearances and provide 0" (0 cm) clearance.

■ Grounded electrical supply is required. See “Electrical

Requirements” section.

IMPORTANT: To avoid damage to your cabinets, check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate, or sustain other damage.

Product Dimensions Cabinet Dimensions

A. Glass depth - black and white models - 21³⁄4" (55.2 cm)

Glass depth - stainless steel models - 22¹⁄8" (56.4 cm)

B. Glass width - 24" (60.9 cm) models - 2313/16" (60.5 cm)

Glass width - 30" (76.2 cm) models - 3013/16" (78.4 cm)

Glass width - 36" (91.4 cm) models - 365/16" (92.3 cm) C. Frame depth - 205⁄16" (51.6 cm) D. Frame width - 24" (60.9 cm) models - 2159/64" (55.7 cm)

Frame width - 30" (76.2 cm) models - 29" (73.7 cm)

Frame width - 36" (91.4 cm) models - 347/16" (87.5 cm) E. Cooktop height with bottom heat shield - 37⁄8" (9.8 cm) Cooktop height lighted knobs - 415/16" (12.55 cm) F. Cooktop height including conduit (located at rear of cooktop, right

side) - 5" (12.7 cm) Cooktop height lighted knobs, including conduit (located at rear of

cooktop, right side) - 61/16" (15.4 cm)

A. Location of Power Cord (length of power cord is

48" (121.9 cm), including the conduit)

IMPORTANT: If installing a range hood or microwave hood combination above cooking surface, follow the range hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface.

A. 24" (60.9 cm) on 24" models; 30" (76.2 cm) on 30" models;

36" (91.4 cm) on 36" models B. Combustible area above countertop (shown by dashed box above) C. 30" (76.2 cm) minimum clearance between top of cooktop

platform and bottom of uncovered wood or metal cabinet

(24" [61 cm] minimum clearance if bottom of wood or metal

cabinet is covered by not less than 1/4" [0.6 cm] ﬂame retardant

millboard covered with not less than No. 28 MSG sheet steel,

0.015" [0.04 cm] stainless steel, or 0.024" [0.06 cm] aluminum

or0.020" [0.05 cm] copper) D. 13" (33 cm) recommended upper cabinet depth E. 2" (5.1 cm) F. 20¹⁄2" (52.0 cm) recommended cutout.

Will ﬁt in cutout from 20³⁄8" - 209⁄16" (51.8 - 52.2 cm). G. 18" (45.7 cm) minimum clearance from upper cabinet to

countertop within minimum horizontal clearances to cooktop H. Junction box or outlet: 7" (17.8 cm) minimum from top of

countertop I. Junction box or outlet: 9" (23.0 cm) maximum from right side

ofcabinet J. 29¹⁄2" (74.9 cm) recommended cutout on 30" (76.2 cm) models.

Will ﬁt in cutout from 29¹⁄16" - 299⁄16" (73.8 - 75.1 cm) on 30"

(76.2cm) models.

35¹⁄2" (90.2 cm) recommended cutout on 36" (91.4 cm) models.

Will ﬁt in cutout from 349⁄16" - 359⁄16" (87.8 - 90.3 cm) on 36"

(91.4 cm) models.

225/16" (56.67 cm) recommended cutout on 24" (61.0 cm)

Will ﬁt in cutout from 221/4" - 223/7" (56.4 - 57.0 cm) on

24" (61.0 cm) models. K. 21/2" (6.35 cm) minimum distance to nearest left and right side

combustible surface above cooktop L. 11/2" (3.81 cm) minimum clearance between back wall and

countertop

NOTES: After making the countertop cutout, some installations may require notching down the base cabinet side walls to clear the cooktop base. To avoid this modication, use a base cabinet with sidewalls wider than the cutout.

If cabinet has a drawer, a 5¹⁄2" (14.0 cm) depth clearance from the top of the countertop to the top of the drawer (or other obstruction) in base cabinet is required.

+ 7 hidden pages