Jenn-Air JDB3650AWY5, JDB3650AWY4, JDB3650AWY3, JDB3650AWR5, JDB3650AWR4 Owner’s Manual

...
THANK YOU for purchasing this high-quality product. If you should experience a problem not covered inTROUBLESHOOTING,
please visit our website at www.jennair.com for additional information. If you still need assistance, call us at 1-800-688-1100. In
Canada, visit our website at www.jennair.ca or call us at 1-800-807-6777. You will need your model and serial number located near the door on the right-hand or left-hand side of the dishwasher interior.
Para obtener acceso a "lnstrucciones para el usuario de la lavavajillas" en espa_ol, o para obtener informaci6n adicional de su producto, visite: www.jennair.com
Tenga listo su nQmerode modelo completo. Puede encontrar su nQmero de modelo y de serie en la etiqueta ubicada cerca de la
puerta al lado derecho o izquierdo del interior de la lavavajillas.
DISHWASHER SAFETY ............................................................. 1
QUICK STEPS ............................................................................ 2
DISHWASHER USE .................................................................... 3
CYCLE AND OPTION DESCRIPTIONS .................................... 5
DISHWASHER FEATURES ........................................................ 7
FILTRATION SYSTEM ............................................................... 8
DISHWASHER CARE ................................................................. 9
TROUBLESHOOTING ................................................................ 9
WARRANTY .............................................................................. 11
,
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
W10300216A
iMPORTANT SAFETY iNSTRUCTiONS
WARNING: When using the dishwasher, follow basic precautions, including the following:
[] Read all instructions before using the dishwasher. [] Do not tamper with controls. [] Use the dishwasher only for its intended function. [] Use only detergents or rinse agents recommended for use in
a dishwasher, and keep them out of the reach of children.
[] When loading items to be washed:
1) Locate sharp items so that they are not likely to damage the door seal; and
2) Load sharp knives with the handles up to reduce the risk of cut-type injuries.
[] Do not wash plastic items unless they are marked
"dishwasher safe" or the equivalent. For plastic items not so
marked, check the manufacturer's recommendations.
[] Do not touch the heating element during or immediately after
use.
[] Do not operate the dishwasher unless all enclosure panels
are properly in place.
[] Do not abuse, sit on, or stand on the door, lid, or dish racks
of the dishwasher.
[] To reduce the risk of injury, do not allow children to play in
or on the dishwasher.
[] Under certain conditions, hydrogen gas may be produced in
a hot water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water
system has not been used for such a period, before using the dishwasher turn on all hot water faucets and let the
water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable,
do not smoke or use an open flame during this time.
[] Remove the door or lid to the washing compartment
when removing an old dishwasher from service or discarding it.
SAVE THESE iNSTRUCTiONS
GROUNDING iNSTRUCTiONS
For a grounded, cord-connected dishwasher:
The dishwasher must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. The dishwasher is equipped with a cord having an equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet
that is installed and grounded in accordance with all local codes and ordinances.
WARNING: Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service representative
if you are in doubt whether the dishwasher is properly grounded. Do not modify the plug provided with the dishwasher; if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
[]
For a permanently connected dishwasher: The dishwasher must be connected to a grounded metal,
permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead on the dishwasher.
SAVE THESE iNSTRUCTiONS
Tip Over Hazard Do not use dishwasher until completely installed. Do not push down on open door. Doing so can result in serious injury or cuts.
Prepare and load _
dishwasher. %Y
Select a cycle and option. (Cycles and options vary by model.)
EVERYDAY CYCLES
ENTERTAINMENT CYCLES --
OPTIONS
for cleaning and
rinse aid for
drying.
Add detergent ,' _ _
....:i:%
Prepare and Load the Dishwasher
IMPORTANT: Remove leftover food, bones, toothpicks and other
hard items from the dishes. Remove labels from containers before washing.
10 Place load pattern
Start dishwasher. NOTE: If the Start/Resume button is
Start /
Resume
located on the top of the door, push the door firmly closed within
3 seconds of pressing START/ RESUME.
Make sure that when the dishwasher door is closed no items are blocking the detergent dispenser.
Items should be loaded with soiled surfaces facing down and inward to the spray as shown. This will improve cleaning and drying results.
Avoid overlapping items like bowls or plates that may trap food.
Place plastics, small plates and glasses in the upper rack. Wash only plastic items marked "dishwasher safe."
To avoid thumping/clattering noises during operation: Load dishes so they do not touch one another. Make sure lightweight
load items are secured in the racks. When loading silverware, always place sharp
items pointing down. Mix some of the items having pointing up and some pointing down.
Upper rack Lower rack
12 Place load pattern
Upper rack Lower rack
Make sure nothing keeps spray arm(s) from spinning freely. It is important for the water spray to reach all soiled surfaces.
Add Detergent NOTE: If you do not plan to run a wash cycle soon, run a rinse
cycle. Do not use detergent.
Use automatic dishwasher detergent only. Add powder, liquid or tablet detergent just before starting a cycle.
Freshautomatic dishwasherdetergent
resultsinbetter cleaning.Storetightly
closeddetergent containerinacool,dry place.
A. Cover latch
B. Main Wash section
C. Pre-Wash section
The amount of detergent to use depends on: How much soil remains on the items - Heavily soiled loads
require more detergent.
The hardness of the water - If you use too little in hard water,
dishes won't be clean. If you use too much in soft water, glassware will etch.
Soft to Medium Water (0-6 grains per U.S. gallon) [typical water softener water and some city water]
Medium to Hard Water (7-12 grains per U.S. gallon) [well water and some city water]
Depending on your water hardness, fill the Main Wash section of the dispenser as shown. Fill the Pre-Wash section to the
level shown, if needed.
NOTE: Fill amounts shown
are for standard powdered detergent. Follow instructions
on the package when using other dishwasher detergent.
Add Rinse Aid
Your dishwasher is designed to use rinse aid for good drying
performance. Without rinse aid your dishes and dishwasher interior will have excessive moisture. The heat dry option will not perform as well without rinse aid.
Rinse aid keeps water from forming droplets that can dry as spots or streaks. They also improve drying by allowing water to drain off of the dishes after the final
rinse.
Rinse aid helps to reduce excess moisture on the dish racks and interior of your dishwasher.
Check the rinse aid indicator. Add rinse aid when indicator drops to "Refill" level.
To add rinse aid, turn the dispenser cap Lock
to "Refill" and lift off. Pour rinse aid into the opening until the indicator level is at
"Full." Replace the dispenser cap and
turn to "Lock." Make sure cap is fully
locked.
HardWater
Soft Water
MainWash Pre-Wash
Refill
HardWater
SoftWater
Full
Add
NOTE: For most water conditions, the factory setting of 2 will give good results. If you have hard water or notice
rings or spots, try a higher setting. Turn the arrow adjuster inside the dispenser
C
by either using your fingers or inserting a flat-blade screwdriver into the center
of the arrow and turning.
Select a Cycle (cycles vary by model)
See "Cycle and Option Descriptions" charts in the following section.
Heavier cycles and options affect cycle length. Some cycles and options will take up to 31/2hours to complete.
EVERYDAY CYCLES
ENTERTAINMENT CYCLES __
Select Options (options vary by model)
See "Cycle and Option Descriptions" charts in the following section.
You can customize your cycles by pressing the options desired.
OPTIONS
STEP 4
Start or Resume a Cycle
Run hot water at the sink nearest your dishwasher until the water is hot. Turn off water. Start/
Press START/RESUME and close the door within 3 seconds. The door latches automatically. Press
START/RESUME to repeat the same cycle and options as in the previous wash cycle.
You can add an item anytime before the main wash starts. Open the door slowly and add the item. Press START/RESUME
and close the door within 3 seconds.
Resume
turn to lock
]VERYDAYCYCLES ENTERTAINMENTCYCLES -- OPTIONS
Control Lock
This information covers several different models. Your dishwasher may not have all of the cycles and options described.
FSZq
CYCLES DISH LOAD TYPES DESCRIPTIONS
Cycle Cycle +
WASH TIME (HH:MM)
*Maximum
Minimum Options
Minimum
, , use for any loads With heavY, Designed to seleCt the number of water 2:1i 2:35 3:07
Sensor norma or ight amounts of fills best suited for the soil level of each
Wash foodsoil, load.
Use for hard-to-clean, heavily This cycle forces maximum time, water
1:39 2:09 3:30
Heavy ] soiled pots, pans, casseroles, and heat.
Wash J and regular tableware.
use for loads With normal The energy_usage label isbased Onthis ! :! i ! :4i 3:30
Normal I amounts of food soil. cycle. During the wash the wash action
Wash repeate(_!y pause for severa! secondsl
China! I china and crystal.
Use for lightly soiled items or
Crystal
I
During the wash, the wash action will repeatedly pause for several seconds.
1:17 1:47 2:51
, When YoUneed fast results, This CYc!e does not dry: For improved 0:58 0:880:88
1Hour I the 1Hour Wash will clean drying, select the Heated Dry oPtion,
Wash J yourdishes using slightly adding _/2hour to the wash cyc!el
more water and energy.
0:37 0:37 0:37
I PlateWarmer I
Use for loads of clean plates and keep food warm longer
by serving it on a heated plate.
The Plate Warmer cycle will heat 12 clean dinner plates to a warm temperature.
Remember when removing the items from the dishwasher they will still be warm.
You can customize your cycle by selecting an option. See option selections. If you change your mind, press the option again to turn off the option, or select a different option. You can change an option anytime before the selected option begins.
*Maximum wash times depend on water temperature, heavy soil condition, dish load size and options selected.
OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:
use for small Ioadsl For added convenience: use for washing a small load sensor Wash, HeavY
Top I dishes in the t0p rack, wash; N°rmal Wash;
P
/ Rack I China/Crystal or 1-Hour
L J
SteamClean ]
Use for loads with normal amounts of soil.
The Steam option adds steam to the cycle. This option
raises the water temperature in the final rinse to approximately 155°F (68°C). The option adds heat and time
Wash
Heavy Wash or Normal Wash cycle.
to the cycle.
Loads containing toUgh, increases the target watei temperature during the Wash HeaW Wash oi Noima i
baked-° n f°°d! P°Ai°ns 0f the cyc!e. Wash cYCle
Adds heat, wash time and water to the cycle.
OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:
Sanitize l
Tosanitize your dishes and glassware in accordance
with NSF/ANSI Standard 184 for Residential Dishwashers.
Raises the water temperature in the final rinse to approximately 155°F (68°C). This high temperature rinse
sanitizes your dishes and glassware in accordance with NSF/ANSI Standard 184 for Residential Dishwashers.
Certified residential dishwashers are not intended for licensed food establishments.
The Sanitize or Sani Rinse option adds heat and time to the
cycle.
Normal Wash cycle. Heavy Wash cycle
automatically uses Sanitize. Only these
sanitization cycles have been designed to meet the NSF/ANSI
requirements.
For best drying results, drY Turn OFF When loads contain plastic dinnerware that may be All cYClesl Automatic
I Heated I dishes with heat: sensitivet° high temPe!atu!es! with al! wash cycles
Dry _ unless you turn It off
I I This option with the use of rinse aid will provide the best"
drying performance.
I 4 HourDelay I
To run your dish washer at Delays the start of a cycle up to 4 hours. a later time or during off- Select a wash cycle and options. Press 4 HOUR DELAY.
peak hours. Press START/RESUME. Close the door firmly.
All cycles.
c0ntrol Lock To avoid Unintended use of To turn on Lock:, press and hold HEATED DRY forat least Anytime
your dishwasher, or cycle 4 seconds.
Heated,-, I , ! " To turn off Locki press and hold HEATED DRY for at least
Dry _ a cyc e
I I ' 4 seconds,
and opt on changes dur ng
when Control Lock is lit ai! buttons are disabled, if you press
any pad whi!e your dishwasher is locked, the light f ashes 3 timesl The dishwasher do0r can be 0pened wh le the
controls are locked.
IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle will automatically compensate by adding time, heat and water as needed.
CYCLE STATUS
CONTROL PURPOSE COMMENTS
I To start or resume a if the dOor is opened during a cYcle or the power is interrUpted, the StartJResUme indicatoi
Start/ / wash cycle flashes. The cycle will not resume until the START/RESUME button is pushed and the door is
Resume J cloSed Within 3 seconds.
To cancel wash Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher
Cancel cycle drain completely.
=. To follow the The Clean indicator glows When a CYcle is finished. m C°_i[°i_°ck progress 0f your If You select the Sanitize option; when the Sani Rinse Cycle is finished, the Sanitize indicator
Clean glows. If your dishwasher did not properly sanitize your dishes, the light flashes at the end of the
alsnwasner CyCle
cyc!e, This can happen if the cycle is interruPted, or the water could not be heated to the required
temperature i The light goes off when you open and c!ose the door or press CANCEL
Your Jenn-Air dishwasher may have some or all of these features.
Adjustable 2-Position Upper Rack
You can raise or lower the upper rack to fit tall items inthe upper or
bottom rack. Adjusters are located on each side of the upper rack.
Each adjuster has 2 preset positions. The high and low positions are marked on the adjuster.
To raise the rack, press both rack adjusters and lift the rack until it
is in the Up position and level. To lower the rack,
press both rack adjusters and slide the
rack back to its lower
position.
NOTE: The upper rack must be level.
To replace the rack:
1. Gently pull rack tracks forward in dishwasher until they stop and click into place.
2. To open track stops, flip the track stop to the outside of the track.
3. Place the back rack rollers on each side of the rack into the track slot and roll the rack back into the tracks.
4. Insert front rack rollers on each side of the rack into the rack slots.
5. Close track stops on both sides of rack and slide rack back into dishwasher.
Light Item Clips
The light item clips hold lightweight plastic items such as cups, lids, or bowls in place during
washing.
To move a clip:
1. Pull the clip up and off the tine.
2. Reposition the clip on another tine.
Removable Upper Rack
The removable rack allows you to A wash larger items such as stock
pots, roasters, and cookie sheets in the lower level rack.
IMPORTANT: Remove dishes prior to removing the mid level
rack from dishwasher. To remove the rack: A. Trackstop
1. To access track stops, pull the B.Track rack forward until it stops and clicks into place.
2. To open track stops, flip the track stop to the outside of the track.
3. After opening both track stops, slide front wheels up and out
of the slot in track. Continue to pull rack forward in track and
slide the back wheels up and out of the track.
4. Close track stops.
5. Slide rack tracks back into dishwasher.
Fold-down Tines
The row of tines on the left-hand and right-hand sides of the upper rack
can be adjusted to make room for a variety of dishes.
To adjust the fold-down tines:
B
1. Grasp the tip of the tine that is in the tine holder.
2. Gently push the tine out of the holder.
3. Lay the tines down, toward the center of the rack.
Yourdishwasherhasthelatesttechnologyindishwasherfiltration.Thistriplefiltrationsystemminimizessoundandoptimizeswaterand energyconservationwhileprovidingsuperiorcleaningperformance.Throughoutthelifeofyourdishwasher,thefilterwillrequire
maintenancetosustainpeakcleaningperformance.
Thetriplefiltersystemconsistsof2parts,anupper
filterassemblyandalowerfilter.
Theupperfilterassemblykeepsoversizeditems
pill
andforeignobjects,alongwithveryfinefood particles,outofthepump.
Thelowerfilterkeepsfoodfrombeingrecirculated ontoyourdishware.
Thefiltersmayneedtobecleanedwhen:
Locating
Tabs
VisibleobjectsorsoilsareontheUpperFilter
Assembly.
Thereisdegradationincleaningperformance(that is,soilsstillpresentondishes).
Dishesfeelgrittytothetouch.
Lower Filter
Itisveryeasytoremoveandmaintainthefilters.The chartbelowshowstherecommendedcleaning
frequency.
Number of Loads If you wash If you scrape and rinse If you only scrape Per Week before loading before loading before loading*
1 '3 ' Once per year Once per year Twice per year ........................................
4-7 once per year Once per year Twice per year 8-12 Once per year Twice per year Every three months
13-14 Once per year Twice per year Every three months
*Manufacturer's recommendation: This practice will conserve the water and energy that you would have used to prepare your dishes. This
will also save you time and effort.
Very Hard Water
Ifyou have hard water (above 15 grains), clean your filter at least
once per month. Building up of white residue on your dishwasher
indicates hard water. For tips on removing spots and stains, see "Troubleshooting" section.
Filter Removal Instructions
1. Turn the Upper Filter Assembly turn
counterclockwise and lift out.
2. Grasp the Lower Filter in the circular opening, lift
slightly, and pull forward to
remove.
3. Clean the filters as shown
below.
i i
Cleaning Instructions
IMPORTANT: Do not use wire brush, scouring pad, etc., as they
may damage the filters. Rinse filter under running water until most soils are removed. If you
have hard-to-remove soils or calcium deposits from hard water, a soft brush may be required.
tab
If you do not scrape or rinse before loading
EverY two months Once per month
Every two weeks Once per week
To remove Upper Filter Assembly
Loading...
+ 16 hidden pages