Jenn-Air JDB3650AWY2, JDB3650AWY1, JDB3650AWY0, JDB3650AWR2, JDB3650AWR1 Owner’s Manual
...
THANK YOU for purchasing this high-quality product. If you should experience a problem not covered inTROUBLESHOOTING,
please visit our website at www.jennair.com for additional information. If you still need assistance, call us at 1-800-688-1100. In
Canada, visit our website at www.jennair.ca or call us at 1-800-807-6777.
You will need your model and serial number located near the door on the right-hand or left-hand side of the dishwasher interior.
Para obtener acceso a "lnstrucciones para elusuario de la lavavajillas" en espa_ol, o para obtener informaci6n adicional de su
producto, visite: www.jennair.com
Tenga listo su nOmero de modelo completo. Puede encontrar su nOmerode modelo y de serieen laetiqueta ubicada cerca de la
puerta al lado derecho o izquierdo del interior de la lavavajillas.
TableofContents
DISHWASHER SAFETY ............................................................. 1
QUICK STEPS ............................................................................ 3
DISHWASHER USE .................................................................... 3
CYCLE AND OPTION DESCRIPTIONS .................................... 5
DISHWASHER FEATURES ........................................................ 7
FILTRATION SYSTEM ............................................................... 8
DISHWASHER CARE ................................................................. 9
TROUBLESHOOTING .............................................................. 10
WARRANTY .............................................................................. 14
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
W10208700A
iMPORTANT SAFETY iNSTRUCTiONS
WARNING: When using the dishwasher, follow basic precautions, including the following:
[] Read all instructions before using the dishwasher. [] Do not tamper with controls.
[] Use the dishwasher only for its intended function.
[] Use only detergents or rinse agents recommended for use in
a dishwasher, and keep them out of the reach of children.
[] When loading items to be washed:
1) Locate sharp items so that they are not likely to damage
the door seal; and
2) Load sharp knives with the handles up to reduce the risk
of cut-type injuries.
[] Do not wash plastic items unless they are marked
"dishwasher safe" or the equivalent. For plastic items not so
marked, check the manufacturer's recommendations.
[] Do not touch the heating element during or immediately after
use.
[] Do not operate the dishwasher unless all enclosure panels
are properly in place.
[] Do not abuse, sit on, or stand on the door, lid, or dish racks
of the dishwasher.
[] To reduce the risk of injury, do not allow children to play in
or on the dishwasher.
[] Under certain conditions, hydrogen gas may be produced in
a hot water system that has not been used for two weeks or
more. HYDROGEN GAS IS EXPLOSIVE. If the hot water
system has not been used for such a period, before using
the dishwasher turn on all hot water faucets and let the
water flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is flammable,
do not smoke or use an open flame during this time.
[] Remove the door or lid to the washing compartment
when removing an old dishwasher from service or
discarding it.
SAVE THESE iNSTRUCTiONS
GROUNDING iNSTRUCTiONS
For a grounded, cord-connected dishwasher:
The dishwasher must be grounded. In the event of a
malfunction or breakdown, grounding will reduce the risk of
electric shock by providing a path of least resistance for
electric current. The dishwasher is equipped with a cord
having an equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet
that is installed and grounded in accordance with all local
codes and ordinances.
WARNING: Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
SAVE THESE iNSTRUCTiONS
Do not use dishwasher until completely installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.
Check with a qualified electrician or service representative
if you are in doubt whether the dishwasher is properly
grounded. Do not modify the plug provided with the
dishwasher; if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
[]
For a permanently connected dishwasher:
The dishwasher must be connected to a grounded metal,
permanent wiring system, or an equipment-grounding
conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead on
the dishwasher.
Tip Over Hazard
Prepare and load _
dishwasher. %Y
Select a cycle and option.
(Cycles and options vary by model.)
EVERYDAY CYCLES
ENTERTAINMENT CYCLES __
OPTIONS
for cleaning and
rinse aid for
Add detergent _ _
drying. ..,ii.!:!}.:._,"
Prepare and Load the Dishwasher
IMPORTANT: Remove leftover food, bones, toothpicks and other
hard items from the dishes. Remove labels from containers before
washing.
10 Place load pattern
........ _=_ ....... .,._,_ . ..i..,, ...._ , ._
_. ..._..4,8 x _.t_t,¢..., ..i/
Start dishwasher.
NOTE: If the START/
RESUME button is located on
Start /
Resume
the top of the door, push the
door firmly closed within
3 seconds of pressing
START/R ESUM E.
Us®
Make sure that when the dishwasher door is closed no items
are blocking the detergent dispenser.
• Items should be loaded with soiled surfaces facing down and
inward to the spray as shown. This will improve cleaning and
drying results.
• Avoid overlapping items like bowls or plates that may trap food.
• Place plastics, small plates and glasses in the upper rack.
Wash only plastic items marked "dishwasher safe."
• To avoid thumping/clattering noises during operation: Load
dishes so they do not touch one another. Make sure lightweight
load items are secured in the racks.
When loading silverware, always place sharp
items pointing down. Mix some of the items
having pointing up and some pointing down.
Upper rack Lower rack
12 Place load pattern
Upper rack Lower rack
Make sure nothing keeps spray arm(s) from
spinning freely. It is important for the water
spray to reach all soiled surfaces.
STEP2
Add Detergent
NOTE: If you do not plan to run a wash cycle soon, run a rinse
cycle. Do not use detergent.
• Use automatic dishwasher detergent only. Add powder, liquid
or tablet detergent just before starting a cycle.
Freshautomatic
dishwasherdetergent
resultsinbetter
cleaning.Storetightly
closeddetergent
containerinacool,dry
place.
A. Cover latch
B.Main Washsection
C. Pre-Washsection
• The amount of
detergent to use depends on:
How much soil remains on the items - Heavily soiled loads
require more detergent.
The hardness of the water - If you use too little in hard water,
dishes won't be clean. If you use too much in soft water,
glassware will etch.
Soft to Medium Water (0-6 grains per U.S. gallon)
[typical water softener water and some city water]
Medium to Hard Water (7-12 grains per U.S. gallon)
[well water and some city water]
• Depending on your water hardness, fill the Main Wash section
of the dispenser as shown. Fill the Pre-Wash section to the
level shown, if needed.
NOTE: Fill amounts shown
are for standard powdered
detergent. Follow instructions
on the package when using
other dishwasher detergent.
Add Rinse Aid
Your dishwasher is designed to use rinse aid for good drying
performance. Without rinse aid your dishes and dishwasher
interior will have excessive moisture. The heat dry option will
not perform as well without rinse aid.
Rinse aid keeps water from forming droplets that can
dry as spots or streaks. They also improve drying by
allowing water to drain off of the dishes after the final
rinse.
Rinse aid helps to reduce excess moisture on the
dish racks and interior of your dishwasher.
Check the rinse aid indicator. Add rinse aid when indicator
drops to "Refill" level.
To add rinse aid, turn the dispenser cap
to "Refill" and lift off. Pour rinse aid into
the opening until the indicator level is at
"Full." Replace the dispenser cap and
turn to "Lock." Make sure cap is fully
locked.
HardWater
Soft Water
MainWash Pre-Wash
Refill__
HardWater
SoftWater
Lock
Full
Add
NOTE:Formostwaterconditions,the
factorysettingof2willgivegood
results.Ifyouhavehardwaterornotice
ringsorspots,tryahighersetting.Turn
thearrowadjusterinsidethedispenser
C
byeitherusingyourfingersorinserting
aflat-bladescrewdriverintothecenter
ofthearrowandturning.
Select a Cycle (cycles vary by model)
See "Cycle and Option Descriptions" charts in the following
section.
Heavier cycles and options affect cycle length. Some cycles and
options will take up to 31/2hours to complete.
EVERYDAY CYCLES
ENTERTAINMENT CYCLES __
Select Options (options vary by model)
See "Cycle and Option Descriptions" charts in the following
section.
You can customize your cycles by pressing the options desired.
OPTIONS
STEP4
Start or Resume a Cycle
• Run hot water at the sink nearest your
dishwasher until the water is hot. Turn off water. Start/
• Press START/RESUME and close the door
within 3 seconds. The door latches automatically. Press
START/RESUME to repeat the same cycle and options as in the
previous wash cycle.
• You can add an item anytime before the main wash starts.
Open the door slowly and add the item. Press START/RESUME
and close the door within 3 seconds.
Resume
turn to lock
EVERYDAY CYCLES ENTERTAINMENTCYCLES -- OPTIONS
Control Lock
This information covers several different models. Your dishwasher may not have all the cycles and options described.
CYCLES DISH LOAD TYPES DESCRIPTIONS
Cycle Cycle +
WASH TIME (HH:MM)
*Maximum
Minimum Options
Minimum
use for any loads With heavYl Designed to select the number of water 2:1 i 2:35 3:07
Sensor normaor ght amounts of f ls best su ted for the so eve ofeach
Wash food Soil. load.
-- Use for hard-to-clean, heavily This cycle forces max time water and
1:39 2:09 3:30
Heavy I soiled pots, pans, casseroles, heat.
Wash I and regular tableware.
. Use for 10adsWith normal The energy_usage label is based on this i:1 ! li4i 3:30
Normal amounts of food soil. cycle, During the washl the wash action
Wash wil! repeatedly pause for several seconds,
Use for lightly soiled items or During the wash, the wash action will
1:17 1:47 2:51
I China! I china and crystal, repeatedly pause for several seconds.
Crystal
I
I
When you need faSt results, This cycle does not d_i For imprOved 0i58 0 88 0;88
1Hour the ! Hour Wash will clean drying select the Heated Dry oPtion
Wash your dishes using slightly adding 1/2hour to the wash Cyc!e
more water and energy.
0:37 0:37 0:37
I PlateWarmer I
Use for loads of clean plates
and keep food warm longer
by serving it on a heated
plate.
The Plate Warmer cycle will heat 12 clean
dinner plates to a warm temperature.
Remember when removing the items
from the dishwasher they will still be
warm.
You can customize your cycle by selecting an option.
See option selections. If you change your mind, press the option again to turn off the option, or select a different option. You can change
an option anytime before the selected option begins.
*Maximum wash times depend on water temperature, heavy soil condition, dish load size and options selected.
OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:
Use for small ioads. For added conVenienCe, use for Washing a small load Of sensor Wash, Heavy
I Top I dishes n the top rack, Wash, Normal Wash,
Race j .................................................................................................................................................. China/Crysta! o r!Hour
I SteamClean]
Use for loads with normal
amounts of soil.
The Steam option adds steam to the cycle. This option
raises the water temperature in the final rinse to
approximately 155°F (68°C). The option adds heat and time
Wash
Heavy Wash or Normal
Wash cycle.
to the cycle.
Loads containing tough, Increases the target water temperature during the wash Heavy Wash or Normal
Super ] baked-on food. portions of th e cycle: Wash cyc!e
Scrub
l
Adds heat, wash time and water to the cycle,
OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:
Sanitize ]
Tosanitize your dishes and
glassware in accordance
with NSF/ANSl Standard
184 for Residential
Dishwashers.
Raises the water temperature in the final rinse to
approximately 155°F (68°C). This high temperature rinse
sanitizes your dishes and glassware in accordance with
NSF/ANSl Standard 184 for Residential Dishwashers.
Certified residential dishwashers are not intended for
licensed food establishments.
The Sanitize or Sani Rinse option adds heat and time to the
cycle.
Normal Wash cycle.
Heavy Wash cycle
automatically uses
Sanitize. Only these
sanitization cycles have
been designed to meet
the NSF/ANSl
requirements.
For best drying results, dry Turn OFE when loads contain plastic dinnerware that may be A!l Cyclesl Automatic
H_rtyd_ dishes with heat. sensitive to high temperatures, with all wash cycles
.............................................. This option With the use of rinse aid Will provide the best ...... un!ess Y0U turn !t off: ......
drYing performance ............................
4 Hour
Delay ]
To run your dish washer at Delays the start of a cycle up to 4 hours.
a later time or during off- Select a wash cycle and options. Press 4 Hour Delay. Press
peak hours. START/RESUME. Close the door firmly.
,ok Toavoid unintended use of To turn on Lock, press and hold Heated Dry for at least
All cycles.
Anytime
your dishwasiqer, or cycle 4 seconds.
Heated_L_ry and option changes during To turn off Lock, press and hold Heated Dry for at least
a cycle. 4 seconds.
When Control Lock is lit. all buttons are disabled. If you press
any pad while your dishwasher is locked, the light flashes
3 times. The dishwasher door can be opened while the
controls are locked.
IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the
cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle
will automatically compensate by adding time, heat and water as needed.
CONTROL PURPOSE COMMENTS
To start or resume a If the door is opened during a cycle or the power is interrupted, the StarVResume indicator
Start/ wash cycle flashes. The cycle will not resume until the START/RESUME button is pushed and the door is ....
Resume closed within 3 secondsl
To cancel wash
Cancel cycle
Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher
drain completely.
: i Tofolowthe The Clean indicator glows When a cYC e is f n shed.
Z Sk-a°n_iirz°_d°oK progress of you[ If you Select the sanitize option; When the sani Rinse CYcie is finished, the sanitize indicator
m C'ean glowsl If your dishwasher did not proper!y sanitize your dishes, the light flashes at the end ofthe
alsnwasner cycle
cycle, This can happen if the cycle is interrupted, or the wate[ could not be heated to the required
Your Jenn-Air dishwasher may have some or all of these features.
Split & FitTM Utensil Basket
The split silverware basket can be
separated and placed in various
locations in the lower rack. Load
flatware and utensils into both
sections or just one, depending on
your load.
To split the basket:
Hold the basket firmly along the sides.
Unlock the baskets.
Adjustable 2-Position Upper Rack
You can raise or lower the upper rack to fit tall items in the upper or
bottom rack. Adjusters are located on each side of the upper rack.
Each adjuster has 2 preset positions. The high and low positions
are marked on the adjuster.
To raise the rack, press both rack adjusters and lift the rack until it
is in the Up position and level.
To lower the rack,
press both rack
adjusters and slide the
rack back to its lower
position.
NOTE: The upper rack
must be level.
Removable Upper Rack
The removable rack allows you to
wash larger items such as stock
pots, roasters, and cookie sheets
in the lower level rack.
IMPORTANT: Remove dishes
prior to removing the mid level
rack from dishwasher.
To remove the rack:
1. To access track stops, pull the
rack forward until it stops and
clicks into place.
2. To open track stops, flip the track stop to the outside of the
track.
3. After opening both track stops, slide front wheels up and out
of the slot in track. Continue to pull rack forward in track and
slide the back wheels up and out of the track.
4. Close track stops.
5. Slide rack tracks back into dishwasher.
To replace the rack:
1. Gently pull rack tracks forward in dishwasher until they stop
and click into place.
2. To open track stops, flip the track stop to the outside of the
track.
3. Place the back rack rollers on each side of the rack into the
track slot and roll the rack back into the tracks.
4. Insert front rack rollers on each side of the rack into the rack
slots.
5. Close track stops on both sides of rack and slide rack back
into dishwasher.
Light Item Clips
The light item clips hold lightweight plastic items
such as cups, lids, or bowls in place during
washing.
A.Trackstop
B.Track
To move a clip:
1. Pull the clip up and off the tine.
2. Reposition the clip on another tine.
Fold-down Tines
The row of tines on the left-hand and
right-hand sides of the upper rack
can be adjusted to make room for a
variety of dishes.
To adjust the fold-down tines:
1. Grasp the tip of the tine that is in
the tine holder.
2. Gently push the tine out of the
holder.
3. Lay the tines down, toward the
center of the rack.
Yourdishwasherhasthelatesttechnologyindishwasherfiltration.Thistriplefiltrationsystemminimizessoundandoptimizeswaterand
energyconservationwhileprovidingsuperiorcleaningperformance.Throughoutthelifeofyourdishwasher,thefilterwillrequire
maintenancetosustainpeakcleaningperformance.
Thetriplefiltersystemconsistsof2parts,anupper
filterassemblyandalowerfilter.
• Theupperfilterassemblykeepsoversizeditems
)1I1
andforeignobjects,alongwithveryfinefood
particles,outofthepump.
Assembly
• Thelowerfilterkeepsfoodfrombeingrecirculated
ontoyourdishware.
Thefiltersmayneedtobecleanedwhen:
Locating
Tabs
• VisibleobjectsorsoilsareontheUpperFilter
Assembly.
• Thereisdegradationincleaningperformance(that
is,soilsstillpresentondishes).
• Dishesfeelgrittytothetouch.
Lower Filter
Itisveryeasytoremoveandmaintainthefilters.The
chartbelowshowstherecommendedcleaning
frequency.
RECOMMENDED TIME INTERVAL TO CLEAN YOUR FILTER
Number of Loads If you wash If you scrape and rinse If you only scrape If you do not scrape or rinse
Per Week before loading before loading before loading* before loading
1,3 once per year .............................once per year Twice per year Eve_ two months
4-7 once per year Once per year Twice per year Once per month
Once per year Twice per year Eve_ three months Eve_ two weeks
13-14 once per year Twice per year Every three months Once per week
*Manufacturer's recommendation: This practice will conserve the water and energy that you would have used to prepare your dishes. This
will also save you time and effort.
Very Hard Water
Ifyou have hard water (above 15 grains), clean your filter at least
once per month. Building up of white residue on your dishwasher
indicates hard water. For tips on removing spots and stains, see
"Troubleshooting" section.
Filter Removal Instructions
1. Turn the Upper Filter
Assembly 1¼turn
counterclockwise and lift
out.
2. Grasp the Lower Filter in
the circular opening, lift
slightly, and pull forward to
remove.
3. Clean the filters as shown
below.
To remove Upper Niter Assembly
tab
Cleaning Instructions
IMPORTANT: Do not use wire brush, scouring pad, etc. as they
may damage the filters.
Rinse filter under running water until most soils are removed. If you
have hard-to-remove soils or calcium deposits from hard water, a
soft brush may be required.
Loading...