Jenn-Air JDB3600AWP, JDB3600AWS User Manual [fr]

0 (0)
DISHWASHER USER INSTRUCTIONS
THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING, please visit our website at www.jennair.com for additional information. If you still need assistance, call us at 1-800-688-1100. In Canada, visit our website at www.jennair.ca or call us at 1-800-807-6777.
You will need your model and serial number located near the door on the right-hand or left-hand side of the dishwasher interior.
Para obtener acceso a “Instrucciones para el usuario de la lavavajillas” en español, o para obtener información adicional de su producto, visite: www.jennair.com
Tenga listo su número de modelo completo. Puede encontrar su número de modelo y de serie en la etiqueta ubicada cerca de la puerta al lado derecho o izquierdo del interior de la lavavajillas.
Table of Contents
DISHWASHER SAFETY............................................................. 1
QUICK STEPS ............................................................................ 2
DISHWASHER USE.................................................................... 3
CYCLE AND OPTION DESCRIPTIONS.................................... 5
DISHWASHER FEATURES........................................................ 7
FILTRATION SYSTEM ............................................................... 8
DISHWASHER CARE................................................................. 9
TROUBLESHOOTING................................................................ 9
WARRANTY .............................................................................. 11
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
You can be killed or seriously injured if you don't immediately
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
follow instructions.
can be killed or seriously injured if you don't
You instructions.
follow
W10300216A
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
Read all instructions before using the dishwasher.
Use the dishwasher only for its intended function.
Use only detergents or rinse agents recommended for use in a dishwasher, and keep them out of the reach of children.
When loading items to be washed:
1) Locate sharp items so that they are not likely to damage the door seal; and
2) Load sharp knives with the handles up to reduce the risk of cut-type injuries.
Do not wash plastic items unless they are marked “dishwasher safe” or the equivalent. For plastic items not so marked, check the manufacturer's recommendations.
Do not touch the heating element during or immediately after use.
Do not operate the dishwasher unless all enclosure panels are properly in place.
When using the dishwasher, follow basic precautions, including the following:
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
For a grounded, cord-connected dishwasher:
The dishwasher must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. The dishwasher is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.
WARNING:
Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
SAVE THESE INSTRUCTIONS
Do not tamper with controls.
Do not abuse, sit on, or stand on the door, lid, or dish racks of the dishwasher.
To reduce the risk of injury, do not allow children to play in or on the dishwasher.
Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the dishwasher turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.
Remove the door or lid to the washing compartment when removing an old dishwasher from service or discarding it.
Check with a qualified electrician or service representative if you are in doubt whether the dishwasher is properly grounded. Do not modify the plug provided with the dishwasher; if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
For a permanently connected dishwasher:
The dishwasher must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the dishwasher.
WARNING
Tip Over Hazard
Do not use dishwasher until completely installed. Do not push down on open door. Doing so can result in serious injury or cuts.
2
Quick Steps
Prepare and load
1
dishwasher.
Add detergent
2
for cleaning and rinse aid for drying.
Dishwasher Use
STEP 1
Prepare and Load the Dishwasher
IMPORTANT: Remove leftover food, bones, toothpicks and other
hard items from the dishes. Remove labels from containers before washing.
10 Place load pattern
Select a cycle and option.
3
(Cycles and options vary by model.)
Start dishwasher.
4
NOTE: If the Start/Resume button is
located on the top of the door, push the door firmly closed within 3 seconds of pressing START/ RESUME.
Make sure that when the dishwasher door is closed no items
are blocking the detergent dispenser.
Items should be loaded with soiled surfaces facing down and
inward to the spray as shown. This will improve cleaning and drying results.
Avoid overlapping items like bowls or plates that may trap food.
Place plastics, small plates and glasses in the upper rack.
Wash only plastic items marked “dishwasher safe.”
To avoid thumping/clattering noises during operation: Load
dishes so they do not touch one another. Make sure lightweight load items are secured in the racks.
When loading silverware, always place sharp
items pointing down. Mix some of the items having pointing up and some pointing down.
Upper rack Lower rack
12 Place load pattern
Upper rack Lower rack
Make sure nothing keeps spray arm(s) from
spinning freely. It is important for the water spray to reach all soiled surfaces.
STEP 2
Add Detergent
NOTE: If you do not plan to run a wash cycle soon, run a rinse
cycle. Do not use detergent.
Use automatic dishwasher detergent only. Add powder, liquid
or tablet detergent just before starting a cycle.
3
Fresh automatic
C
dishwasher detergent results in better cleaning. Store tightly closed detergent container in a cool, dry place.
A
Hard Water
Soft Water
Hard Water Soft Water
B
MAIN WASH
PRE­WASH
NOTE: For most water conditions, the factory setting of 2 will give good results. If you have hard water or notice rings or spots, try a higher setting. Turn the arrow adjuster inside the dispenser by either using your fingers or inserting a flat-blade screwdriver into the center of the arrow and turning.
-
6
5
-
4
-
fill
max
-
-
-
-
-
3
2
1
-
-
-
-
-
-
-
A. Cover latch B. Main Wash section C. Pre-Wash section
The amount of detergent to use depends on:
How much soil remains on the items - Heavily soiled loads require more detergent.
The hardness of the water - If you use too little in hard water, dishes won't be clean. If you use too much in soft water, glassware will etch.
Soft to Medium Water (0-6 grains per U.S. gallon) [typical water softener water and some city water]
Medium to Hard Water (7-12 grains per U.S. gallon) [well water and some city water]
Depending on your water hardness, fill the Main Wash section
of the dispenser as shown. Fill the Pre-Wash section to the level shown, if needed.
NOTE: Fill amounts shown are for standard powdered detergent. Follow instructions on the package when using other dishwasher detergent.
Hard Water Soft Water
Main Wash Pre-Wash
Hard Water
Soft Water
Add Rinse Aid
Your dishwasher is designed to use rinse aid for good drying
performance. Without rinse aid your dishes and dishwasher interior will have excessive moisture. The heat dry option will not perform as well without rinse aid.
Rinse aid keeps water from forming droplets that can
dry as spots or streaks. They also improve drying by allowing water to drain off of the dishes after the final rinse.
Rinse aid helps to reduce excess moisture on the
dish racks and interior of your dishwasher.
Check the rinse aid indicator. Add rinse aid when indicator
drops to “Refill” level.
To add rinse aid, turn the dispenser cap
to “Refill” and lift off. Pour rinse aid into the opening until the indicator level is at “Full.” Replace the dispenser cap and turn to “Lock.” Make sure cap is fully locked.
Refill
fill
max
-
-
-
-
-
Lock
-
-
-
-
Full
Add
6
5
4
3
2
-
-
-
-
-
STEP 3
Select a Cycle (cycles vary by model)
See “Cycle and Option Descriptions” charts in the following section.
Heavier cycles and options affect cycle length. Some cycles and options will take up to 3¹⁄₂ hours to complete.
Select Options (options vary by model)
See “Cycle and Option Descriptions” charts in the following section.
You can customize your cycles by pressing the options desired.
STEP 4
Start or Resume a Cycle
Run hot water at the sink nearest your
dishwasher until the water is hot. Turn off water.
Press START/RESUME and close the door
within 3 seconds. The door latches automatically. Press START/RESUME to repeat the same cycle and options as in the previous wash cycle.
You can add an item anytime before the main wash starts.
Open the door slowly and add the item. Press START/RESUME and close the door within 3 seconds.
1
¹⁄₄
turn to lock
4
Cycle and Option Descriptions
This information covers several different models. Your dishwasher may not have all of the cycles and options described.
CYCLE SELECTIONS
CYCLES DISH LOAD TYPES DESCRIPTIONS WASH TIME (HH:MM)
Use for any loads with heavy, normal or light amounts of food soil.
Use for hard-to-clean, heavily soiled pots, pans, casseroles, and regular tableware.
Use for loads with normal amounts of food soil.
Use for lightly soiled items or china and crystal.
When you need fast results, the 1 Hour Wash will clean your dishes using slightly more water and energy.
Use for loads of clean plates and keep food warm longer by serving it on a heated plate.
Designed to select the number of water fills best suited for the soil level of each load.
This cycle forces maximum time, water and heat.
The energy-usage label is based on this cycle. During the wash, the wash action will repeatedly pause for several seconds.
During the wash, the wash action will repeatedly pause for several seconds.
This cycle does not dry. For improved drying, select the Heated Dry option, adding ¹⁄₂ hour to the wash cycle.
The Plate Warmer cycle will heat 12 clean dinner plates to a warm temperature. Remember when removing the items from the dishwasher they will still be warm.
Cycle
Minimum
2:11 2:35 3:07
1:39 2:09 3:30
1:11 1:41 3:30
1:17 1:47 2:51
0:58 0:88 0:88
0:37 0:37 0:37
Cycle +
Options
Minimum
*Maximum
You can customize your cycle by selecting an option. See option selections. If you change your mind, press the option again to turn off the option, or select a different option. You can change an option anytime before the selected option begins.
*Maximum wash times depend on water temperature, heavy soil condition, dish load size and options selected.
OPTION SELECTIONS
OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:
Use for small loads. For added convenience. use for washing a small load of
Use for loads with normal amounts of soil.
Loads containing tough, baked-on food.
dishes in the top rack.
The Steam option adds steam to the cycle. This option raises the water temperature in the final rinse to approximately 155°F (68°C). The option adds heat and time to the cycle.
Increases the target water temperature during the wash portions of the cycle.
Adds heat, wash time and water to the cycle.
Sensor Wash, Heavy Wash, Normal Wash, China/Crystal or 1-Hour Wash
Heavy Wash or Normal Wash cycle.
Heavy Wash or Normal Wash cycle
5
OPTION SELECTIONS
OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:
To sanitize your dishes and glassware in accordance with NSF/ANSI Standard 184 for Residential Dishwashers.
For best drying results, dry dishes with heat.
To run your dish washer at a later time or during off­peak hours.
Control Lock To avoid unintended use of
your dishwasher, or cycle and option changes during a cycle.
IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle will automatically compensate by adding time, heat and water as needed.
Raises the water temperature in the final rinse to approximately 155°F (68°C). This high temperature rinse sanitizes your dishes and glassware in accordance with NSF/ANSI Standard 184 for Residential Dishwashers. Certified residential dishwashers are not intended for licensed food establishments.
The Sanitize or Sani Rinse option adds heat and time to the cycle.
Turn OFF when loads contain plastic dinnerware that may be sensitive to high temperatures.
This option with the use of rinse aid will provide the best drying performance.
Delays the start of a cycle up to 4 hours. Select a wash cycle and options. Press 4 HOUR DELAY.
Press START/RESUME. Close the door firmly.
To turn on Lock, press and hold HEATED DRY for at least 4 seconds.
To turn off Lock, press and hold HEATED DRY for at least 4 seconds.
When Control Lock is lit, all buttons are disabled. If you press any pad while your dishwasher is locked, the light flashes 3 times. The dishwasher door can be opened while the controls are locked.
Normal Wash cycle. Heavy Wash cycle automatically uses Sanitize. Only these sanitization cycles have been designed to meet the NSF/ANSI requirements.
All cycles. Automatic with all wash cycles unless you turn it off.
All cycles.
Anytime
CONTROLS AND
CYCLE STATUS
CONTROL PURPOSE COMMENTS
To start or resume a wash cycle
To cancel wash cycle
To fol low the progress of your dishwasher cycle
If the door is opened during a cycle or the power is interrupted, the Start/Resume indicator flashes. The cycle will not resume until the START/RESUME button is pushed and the door is closed within 3 seconds.
Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher drain completely.
The Clean indicator glows when a cycle is finished. If you select the Sanitize option, when the Sani Rinse cycle is finished, the Sanitize indicator
glows. If your dishwasher did not properly sanitize your dishes, the light flashes at the end of the cycle. This can happen if the cycle is interrupted, or the water could not be heated to the required temperature. The light goes off when you open and close the door or press CANCEL.
6
Dishwasher Features
B
Your Jenn-Air dishwasher may have some or all of these features.
Adjustable 2-Position Upper Rack
You can raise or lower the upper rack to fit tall items in the upper or bottom rack. Adjusters are located on each side of the upper rack. Each adjuster has 2 preset positions. The high and low positions are marked on the adjuster.
To raise the rack, is in the Up position and level.
To lower the rack, press both rack adjusters and slide the rack back to its lower position.
NOTE: The upper rack must be level.
press both rack adjusters and lift the rack until it
To replace the rack:
1. Gently pull rack tracks forward in dishwasher until they stop
and click into place.
2. To open track stops, flip the track stop to the outside of the
track.
3. Place the back rack rollers on each side of the rack into the
track slot and roll the rack back into the tracks.
4. Insert front rack rollers on each side of the rack into the rack
slots.
5. Close track stops on both sides of rack and slide rack back
into dishwasher.
Light Item Clips
The light item clips hold lightweight plastic items such as cups, lids, or bowls in place during washing.
To move a clip:
1. Pull the clip up and off the tine.
2. Reposition the clip on another tine.
Removable Upper Rack
The removable rack allows you to wash larger items such as stock pots, roasters, and cookie sheets in the lower level rack.
IMPORTANT: Remove dishes prior to removing the mid level rack from dishwasher.
To remove the rack:
1. To access track stops, pull the
rack forward until it stops and clicks into place.
2. To open track stops, flip the track stop to the outside of the
track.
3. After opening both track stops, slide front wheels up and out
of the slot in track. Continue to pull rack forward in track and slide the back wheels up and out of the track.
4. Close track stops.
5. Slide rack tracks back into dishwasher.
A. Track stop B. Track
A
Fold-down Tines
The row of tines on the left-hand and right-hand sides of the upper rack can be adjusted to make room for a variety of dishes.
To adjust the fold-down tines:
1. Grasp the tip of the tine that is in
the tine holder.
2. Gently push the tine out of the
holder.
3. Lay the tines down, toward the
center of the rack.
7
Filtration System
Your dishwasher has the latest technology in dishwasher filtration. This triple filtration system minimizes sound and optimizes water and energy conservation while providing superior cleaning performance. Throughout the life of your dishwasher, the filter will require maintenance to sustain peak cleaning performance.
The triple filter system consists of 2 parts, an upper filter assembly and a lower filter.
The upper filter assembly keeps oversized items
and foreign objects, along with very fine food particles, out of the pump.
The lower filter keeps food from being recirculated
onto your dishware.
The filters may need to be cleaned when:
Locating Tabs
Visible objects or soils are on the Upper Filter
Assembly.
There is degradation in cleaning performance (that
is, soils still present on dishes).
Dishes feel gritty to the touch.
It is very easy to remove and maintain the filters. The chart below shows the recommended cleaning frequency.
RECOMMENDED TIME INTERVAL TO CLEAN YOUR FILTER
Upper Filter Assembly
Lower Filter
W
N
O
&
D
T
H
U
S
R
U
N
P
L
O
N
C
U
K
K
C
O
L
Number of Loads Per Week
If you wash before loading
If you scrape and rinse before loading
If you only scrape before loading*
If you do not scrape or rinse before loading
1-3 Once per year Once per year Twice per year Every two months 4-7 Once per year Once per year Twice per year Once per month 8-12 Once per year Twice per year Every three months Every two weeks 13-14 Once per year Twice per year Every three months Once per week
*Manufacturer's recommendation: This practice will conserve the water and energy that you would have used to prepare your dishes. This
will also save you time and effort.
Very Hard Water
If you have hard water (above 15 grains), clean your filter at least once per month. Building up of white residue on your dishwasher indicates hard water. For tips on removing spots and stains, see “Troubleshooting” section.
Filter Removal Instructions
Cleaning Instructions
IMPORTANT: Do not use wire brush, scouring pad, etc., as they
may damage the filters. Rinse filter under running water until most soils are removed. If you
have hard-to-remove soils or calcium deposits from hard water, a soft brush may be required.
1. Turn the Upp er Fi l ter
Assembly ¼ turn
Locating tab
counterclockwise and lift out.
2. Grasp the Lower Filter in
the circular opening, lift slightly, and pull forward to remove.
3. Clean the filters as shown
below.
L
O
C
K
D
H
O
S
W
U
N
P
&
T
U
R
N
L
O
C
K
P
U
S
H
D
O
W
N
&
T
K
C
U
O
L
N
U
U
R
N
N
L
O
C
K
To remove Upper Filter Assembly
8
Loading...
+ 16 hidden pages