How it Works
Jenn-Air
Loading...
JCB2585WES01
Owner’s Manual
24 pgs4.48 Mb0
Installation Guide
24 pgs2.58 Mb0

Jenn-Air JCB2588WER00, JCB2585WES01, JCB2585WES00, JCB2585WEP01, JCB2582WEY00 Owner’s Manual

...
THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING, please visit our website at www.jennair.com for additional information. If you still need assistance, call us at 1-800-688-1100. In Canada, visit our website at www.jennair.ca or call us at 1-800-807-6777.
You will need your model and serial number, located on the inside wall of the refrigerator compartment.
Para obtener acceso a "lnstrucciones parael usuario del refrigerador" en espa_ol, o paraobtener informaci6n adicional acerca de su producto, visite: www.jennair.com.
Necesitara su nQmero de modelo y de serie, ubicado en el interior del compartimiento del refrigerador.
TableofContents/Tabledes mati6res
WAR RAN TY .......................................................................................... 12
SI_CURITI_ DU RI_FRIGI_RATEUR ..................................................... 13
UTILISATION DU RI_FRIGI_RATEUR ................................................. 14
ENTRETIEN DU RI_FRIGI_RATEUR ................................................... 17
DI_PANNAGE ........................................................................................ 18
ACCESSOIRES .................................................................................... 19
FEUlLLES DE DONNI_ES SUR LA PERFORMANCE ........................ 20
GARANTIE ............................................................................................ 24
REFRIGERATORSAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
W10168304A
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:
• Plug into a grounded 3 prong outlet.
• Do not remove ground prong.
• Do not use an adapter.
• Do not use an extension cord.
• Disconnect power before servicing.
• Replace all parts and panels before operating.
• Remove doors from your old refrigerator.
SAVE THESE INSTRUCTIONS
• Use nonflammable cleaner.
• Keep flammable materials and vapors, such as gasoline, away from refrigerator.
• Use two or more people to move and install refrigerator.
• Disconnect power before installing ice maker (on ice maker kit ready models only).
• Use a sturdy glass when dispensing ice (on some models).
Proper Disposal of Your Old Refrigerator
Suffocation Hazard
Remove doors from your old refrigerator. Failure to do so can result in death or brain damage.
IMPORTANT: Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous
- even if they will sit for "just a few days." Ifyou are getting rid of your old refrigerator, please follow these instructions to help
prevent accidents.
REFRIGERATORUSE
Before You Throw Away Your Old Refrigerator or Freezer:
• Takeoff the doors.
• Leave the shelves in place so that children may not easily climb inside.
For your convenience, your refrigerator controls are preset at the factory. When you first install your refrigerator, make sure that the
controls are still preset to the mid-settings as shown.
O°F .18oC
RECOMMENDED
37°F 3°C
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong. Do not use an adapter.
Do not use an extension cord. Failure to follow these instructions can result in death,
fire, or electrical shock.
NOTE: Make sure the refrigerator is plugged into a grounded 3 prong outlet.
2
Fq
D
FROZEN FOOD FRESHFOOD
IM PORTANT:
• The refrigerator control adjusts the refrigerator compartment temperature. The freezer control adjusts the freezer
compartment temperature. The displays normally show the actual temperatures inside the
refrigerator and freezer compartments. Sometimes, temperatures may vary slightly in different areas of each
compartment. For example, frequently opening the door allows air from the room to enter the compartment, exposing door bins to room-temperature air. When reading the display, keep in mind that it shows an average temperature for the
entire compartment. If you want to view the temperature you set for the compartment rather than the actual temperature, see "Viewing Set Points."
Fq
Wait 24 hours before you put food into the refrigerator. If you add food before the refrigerator has cooled completely, your
food may spoil. NOTE: Adjusting the refrigerator and freezer controls to a
lower (colder) setting will not cool the compartments any faster.
Turning Refrigerator On
• If the refrigerator is off, press ON/OFF to turn the cooling on.
• To turn your refrigerator off, press ON/OFF. Your refrigerator will not cool when the control is set to Off.
NOTE: Pressing the On/Off button does not disconnect power to the refrigerator. The interior lights will turn off if either
compartment door is open for more than 10 minutes. Simply close and open the door to turn on the interior lights.
I On/Off I
Viewing Set Points
The factory recommended set points are 0°F (-18°C) for the freezer and 37°F (3°C) for the refrigerator.
Set point range for the freezer: -6 ° to 6°F (-21 °C to -14°C) Set point range for the refrigerator: 32° to 46°F (0°C to 8°C)
Toview the set point temperatures, press either the up or down button for the refrigerator or freezer temperature. The display will become brighter to indicate that you are viewing the set points. Five seconds after an adjustment is made, the display lights will
dim and return to the actual temperature. NOTE: During automatic defrost cycles, the actual temperature
displayed may be higher than the set point. This is normal. The actual temperatures should return to the set points within a few
hours following completion of the defrost cycle.
Adjusting Controls
The mid-settings indicated in the previous section should be correct for normal household refrigerator usage. The controls are
set correctly when milk or juice is as cold as you like and when ice cream is firm.
If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked.
If you need to adjust temperatures, use the settings listed in the chart below as a guide. Wait at least 24 hours between adjustments.
CONDITION/REASON: ADJUSTMENT:
REFRIGERATOR too warm REFRIGERATOR Control
1o lower
FREEZER too warm/too little ice FREEZER Control
1o lower
Max Cold
Use Max Cold to speed cooling when large grocery loads are added. Max Cold sets the refrigerator temperature to 34°F (1°C)
and the freezer temperature to -6°F (-21 °C) for 24 hours. NOTE: While Max Cold is on, the display shows the Max Cold
temperature set points. After 24 hours or when Max Cold is manually turned off, the set points will be returned to their
previous setting.
• Press MAX COLD to select this mode. Max Cold will stay on for 24 hours or until it is manually turned off.
I MaxCold I
Sabbath Mode
Sabbath Mode is designed for the traveler who wishes to save additional energy or for those whose religious observances
require turning off the lights and ice maker. In Sabbath Mode, the temperature set points remain unchanged, the ice maker and dispenser levers are disabled, and the interior lights turn off.
• Press SABBATH MODE to turn on the Sabbath Mode feature. This feature will remain on until the Sabbath Mode key is
pressed again.
Sabbath Mode I
The control can be adjusted to properly chill meats or vegetables. The air inside the pan is cooled to avoid "spot" freezing and can
be set to keep meats at the National Livestock and Meat Board recommended storage temperatures of 28° to 32°F (-2 ° to 0°C).
The convertible drawer temperature control is preset to the
PRODUCE setting.
To Store Meat:
Set the control to one of the three MEAT settings to store meat at its optimal storage temperature.
To Store Vegetables:
Set the control to PRODUCE to store vegetables at their optimal storage temperatures.
NOTE: If food starts to freeze, move the control to the left (less cold). Remember to wait 24 hours between adjustments.
(o_some modes
You can control the amount of humidity in the moisture-sealed crisper. Adjust the control to any setting between LOW and HIGH.
LOW (open) for best storage of fruits and vegetables with skins. HIGH (closed) for best storage of fresh, leafy vegetables.
REFRIGERATOR too cold REFRIGERATOR Control
1o higher
FREEZER too cold FREEZER Control
1o higher
Additional Control Panel Features
Temp Mode
• Press the °C button to select either Celsius or Fahrenheit temperature displays.
m
D
The door air control is located on the left-hand side of the
refrigerator compartment.
A'--
A. Door air control
Slide the door air control to the left to reduce the flow of cold air to the bin or can rack and make it less cold.
Slide the door air control to the right to increase the flow of cold air to the bin or can rack and make it colder.
,.,, Fffc4on System
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Turning the Ice Maker On/Off
The On/Oft switch is located on the top right-hand side of the freezer compartment.
Toturn on the ice maker, slide the control to the ON (left) position. To manually turn off the ice maker, slide the control to the OFF
(right) position. NOTE: Your ice maker has an automatic shutoff. The ice maker sensors will automatically stop ice production, but the control will
remain in the ON (left) position.
REMEMBER:
• Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced.
The quality of your ice will be only as good as the quality of the water supplied to your ice maker. Avoid connecting the ice
maker to a softened water supply. Water softener chemicals (such as salt) can damage parts of the ice maker and lead to
poor quality ice. If asoftened water supply cannot be avoided, make sure the water softener is operating properly and is well
maintained. Do not use anything sharp to break up the ice in the storage
bin. This can cause damage to the ice container and the dispenser mechanism.
Do not store anything on top of or in the ice maker or storage bin.
Removing and Replacing Ice Storage Bin
1=
Hold the base of the storage bin with both hands and press the release button to lift the storage bin up and out.
NOTE: It is not necessary to turn the ice maker control to the OFF (right) position when removing the storage bin. The
sensor cover ("flipper door") on the left wall of the freezer stops the ice maker from producing ice if the door is open or the storage bin is removed.
2. Replace the storage bin on the door and push down to make sure it is securely in place.
Water Filter Status Display (on some models)
The filter status display will help you know when to change your
water filter. When the display reads 10%, order a new filter. It is recommended that you replace the filter when the display reads
0% OR when water flow to your water dispenser or ice maker decreases noticeably. The filter should be replaced at least every 6 months depending on your water quality and usage.
After changing the filter, reset the display by pressing the button. The display will read 99% when the system is reset.
Non-Indicator Water Filter (on some models)
If your refrigerator does not have the water filter status light, you should change the water filter cartridge at least every 6 months
depending on your water quality and usage. If the water flow to the water dispenser or ice maker decreases noticeably before 6 months have passed, replace the water filter more often.
Changing the Water Filter
1. Press the eject button to release the filter from the base grille.
2. Pull the filter straight out.
3. Turn the cap counterclockwise to remove it from the filter. IMPORTANT: Do not discard the cap. It is part of your
refrigerator. Keep the cap to use with the replacement filter.
4. Align the ridge on the cap with the arrow on the new filter and turn the cap until it snaps into place.
NOTE: You can run the ice maker without a filter. Your water will not be filtered. Simply insert the cap all of the way into the base grille and rotate the cap until it is firmly in place.
5. Remove the covers from the O-rings. Be sure the O-rings are still in place after the covers are removed.
6. Push the filter into the base grille. The eject button will pop back out when the filter is fully engaged.
REFRIGERATORCARE
Explosion Hazard
Use nonflammable cleaner. Failure to do so can result in death, explosion, or fire.
Both the refrigerator and freezer sections defrost automatically. However, clean both sections about once a month to avoid
buildup of odors. Wipe up spills immediately.
IMPORTANT:Becauseaircirculatesbetweenbothsections,any odorsformedinonesectionwilltransfertotheother.Youmust
thoroughlycleanbothsectionstoeliminateodors.Toavoidodor transferanddryingoutoffood,wraporcoverfoodstightly.
ToCleanYourRefrigerator: NOTE:Donotuseabrasiveorharshcleanerssuchaswindow sprays,scouringcleansers,flammablefluids,cleaningwaxes, concentrateddetergents,bleachesorcleanserscontaining
petroleumproductsonplasticparts,interioranddoorlinersor gaskets.Donotusepapertowels,scouringpads,orotherharsh cleaningtools.
1. Unplugrefrigeratorordisconnectpower.
2. Handwash,rinse,anddryremovablepartsandinterior surfacesthoroughly.Useacleanspongeorsoftclothanda milddetergentinwarmwater.
3. Washstainlesssteelandpaintedmetalexteriorswithaclean spongeorsoftclothandamilddetergentinwarmwater.
4. Thereisnoneedforroutinecondensercleaninginnormal homeoperatingenvironments.Iftheenvironmentis
particularlygreasyordusty,orthereissignificantpettrafficin thehome,thecondensershouldbecleanedevery2to 3monthstoensuremaximumefficiency.
TROUBLESHOOTING
If you need to clean the condenser:
• Remove the base grille.
• Use a vacuum cleaner with a soft brush to clean the grille, the open areas behind the grille and the front surface area
of the condenser.
• Replace the base grille when finished.
5.
Plug in refrigerator or reconnect power.
NOTE: Not all bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size, shape and wattage. On some
models, the dispenser light requires a heavy duty 1O-watt bulb. All other lights require a 40-watt bulb. Replacement bulbs are available from your dealer.
1. Unplug refrigerator or disconnect power.
2. Remove light shield when applicable. NOTE: To clean the light shield, wash it with warm water and
liquid detergent. Rinse and dry the shield well.
3. Remove light bulb and replace with one of the same size, shape and wattage.
4. Replace light shield when applicable.
5. Plug in refrigerator or reconnect power.
First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)
to possibly avoid the cost of a service call.
In the U.S.A., www.jennair.com In Canada, www.jennair.ca
Control(s) on? Make sure the refrigerator control is on. See
The refrigerator will not operate
Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.
Do not use an extension cord. Failure to follow these instructions can result in death,
fire, or electrical shock.
Power cord unplugged? Plug into a grounded 3 prong outlet. Is outlet working? Plug in a lamp to see if the outlet is
working. Household fuse blown or circuit breaker tripped? Replace
the fuse or reset the circuit breaker. If the problem continues, call an electrician.
"Using the Control(s)." New installation? Allow 24 hours following installation for the
refrigerator to cool completely. NOTE: Adjusting the temperature control(s) to coldest setting
will not cool the refrigerator more quickly.
The motor seems to run too much
Your new refrigerator may run longer than your old one due to its high-efficiency compressor and fans. The unit may run even
longer if the room is warm, a large food load is added, the door is opened often, or if the door has been left open.
The refrigerator seems noisy
Refrigerator noise has been reduced over the years. Due to this reduction, you may hear intermittent noises from your new
refrigerator that you did not notice from your old model. Below are listed some normal sounds with explanations.
• Pulsating - fans/compressor adjusting to optimize performance.
• Hissing/Rattling - flow of refrigerant, movement of water lines, or from items placed on top of the refrigerator.
• Popping - contraction/expansion of inside walls, especially during initial cool-down.
• Water running/dripping - may be heard when ice melts during defrosting and water runs into the drain pan.
The door will not close completely
• Door blocked open? Move food packages away from door.
• Bin or shelf in the way? Push bin or shelf back in the correct position.
• Crisper cover in the way? Make sure the crisper cover is fully pushed in, so that the back rests on the supports.
The door is difficult to open
Explosion Hazard
Use nonflammable cleaner. Failure to do so can result in death, explosion, or fire.
• Gaskets dirty or sticky? Clean gaskets and contact surfaces with mild soap and warm water. Rinse and dry with soft cloth.
Temperature is too warm
New installation? Allow 24 hours following installation for the refrigerator to cool completely.
Door opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep door fully
closed. Large load of food added? Allow several hours for
refrigerator to return to normal temperature.
Control(s) set correctly for the surrounding conditions?
Adjust the control(s) a setting colder. Check temperature in 24 hours. See "Using the Control(s)."
There is interior moisture buildup
NOTE: Some moisture buildup is normal.
• Humid room? Contributes to moisture buildup.
• Door opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep door fully
closed.
The ice maker is not producing ice or not enough ice
• Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.
• Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.
• Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.
• New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice
production.
• Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.
• Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.
• Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See "Water Supply Requirements."
The ice cubes are hollow or small
NOTE: This is an indication of low water pressure.
• Water shutoff valve not fully open? Turn the water shutoff valve fully open.
Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.
Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure.
See "Water Supply Requirements." Questions remain regarding water pressure? Call a
licensed, qualified plumber.
Off-taste, odor or gray color in the ice
New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.
Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.
Odor transfer from food? Use airtight, moisture proof packaging to store food.
Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.
ACCESSORIES
To order replacement filters, call 1-800-442-9991 and ask for the
part number listed below or contact your authorized Jenn-Air dealer. In Canada, call 1-800-807-6777.
Stainless Steel Cleaner and Polish: Order Part #4396095
Standard Base Filter Cartridge: Order Part #4396841 (T2RFWG2 and P2RFWG2)
6
WATERFILTERCERTIFICATIONS
State of California
Department of Health Services
Water Treatment Device
Certificate Number
05 - 1703
Date Issued: AprlI 6, 2(X)5
Date Revised: September 7, 2005
Trademark/Model Designation
Whirlpool Deluxe T2WG2
Manufacturefl
to Section
Rated Service CapaciD,: 2(Xtgals RatedServiceFlo_: 085gpm
Do not use with water that is microbiologicalIy unsal_ or of unknown quality, without adequate disinfection before or after tbe system
Con ditions of Certification:
Stale of California
I)epartment of Health Services
Water Treatment Device
Certificate Number
05 - 1702
Date Issued: April 6, 2005
Date Revised: September 7, 2005
TrademarldModel Designation
Whirlpool Deluxe T1WG2
Whirlpool DeluxeT
Manufacturer:
116830oftl
Node
State of California
Department of Public I {eatth
Water Treatment Device
Certificate Number
08- 1896
Date Issued: March 24, 2008
Trademark/Model I)esi_nation
2w-G2 ............
P2WG2L
Manufacturer: Wl{_rtp_N rp :, ....
Rated Service Capacity: 200 ga] ]Ra_e_ S_rvitx • _iow: 085 gpm
Do no{ use with water lhat is microbioh)gically unsalE or of unknown quality, withotll adequate disinfection belore or after the system
Co nditi6ns of Certification!
State of Calilim_ia
Department of Public Health
Water Treatment Device
Certificate Number
08- 1895
Date Issued: March 24, 2008
Trademark/Model Designation Replacement Elements
P t W G2 P2RFWG2
P 1 WG2L P2RFWG2
Manulilcturer: Whirlpool ('orp
The water treatmen_ device(s) li_ted_on this certificate have met the testing tequireme_s pursuanl to Section 1168311 of the Health and SM'e_ Code for _ho following health relatod l_ntaminan_:
Microbiological Contaminants and Turbidit_
None
Orffanic Cnntanlinants
BenT_ene O-dichlorobenzene
Toxa_hene
RatedServiceCapacit_: 200gals Rated Service Flow: (t5gpm
Do not use with water that is _Ylicrobiologically unsall: or ol unknown quali_y, without adeqtlme disinli_ction beRire or after the system
Conditions of Certification:
Rafod Service Capacity: 200gaI RatedServiceFIov,: 05gpm
Do not use with walcr that Is mlcmblologicall 3 unsafe or of unknown quahty, Wltholl| adequa|c dlsinl_zCllOn before o_
dim Ihe _y_mn-
Conditions of Certification:
PERFORMANCEDATA SHEETS
Base Grille Water Filtration System
Model T2WG2L/T2RFWG2 Capacity 200 Gallons (757 Liters)
Model T2WG2/T2RFWG2 Capacity 200 Gallons (757 Liters)
System tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of Chlorine Taste and Odor, Particulate
Class I1";and against NSF/ANSI Standard 53 for the reduction of Mercury,
Benzene, Toxaphene, O-dichlorobenzene, and Carbofuran.
This system has been tested according to NSF/ANSI Standards 42 and 53 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the
permissible limit for water leaving the system, as specified in NSF/ANSI Standards 42 and 53.
Substance Reduction
Aesthetic Effects
Chlorine Taste/Odor Particulate Class I1"
Contaminant Reduction
Lead: @ pH 6.5*** Lead: @ pH 8.5***
Mercury: @ pH 6.5 Mercury: @ pH 8.5
Benzene O-Dichlorobenzene
Toxaphene
Carbofuran
Test Parameters: pH = 7.5 _+0.5 unless otherwise noted. Flow = 0.85 gpm (3.2 Lpm). Pressure = 60 psig (413.7 kPa). Temp. = 68°F to 71.6°F (2O°C to 22°C). Rated service capacity = 200 gallons (757 liters).
• It is essential that operational, maintenance, and filter replacement requirements be carried out for the product to
perform as advertised.
• Use replacement filter T2RFWG2, part #4396841. 2008 suggested retail price of $39.99 U.S.A./S54.95 Canada.
Prices are subject to change without notice. Model T2WG2L: Style 1 - When the filter indicator reads 10%,
order a new filter. When the indicator reads 0%, it is recommended that you replace the filter.
Style 2 - When the filter indicator changes from green to yellow, order a new filter. When the indicator changes from yellow to red,
it is recommended that you replace the filter. Style 3 - When the water filter status display changes from
"GOOD" to "ORDER," order a new filter. When the filter indicator reads "REPLACE," it is recommended that you replace the filter.
Style 4 - Press FILTER to check the status of your water filter. If the filter indicator light is yellow, order a new filter. If the filter indicator light is red, it is recommended that you replace the filter.
Model T2WG2: Change the water filter cartridge every 6 months. If the water flow to the water dispenser or ice maker decreases
noticeably before 6 months have passed, replace the water filter cartridge more often.
• These contaminants are not necessarily in your water supply. While testing was performed under standard laboratory
conditions, actual performance may vary.
NSF Reduction Requirements
50% reduction 85% reduction
NSF Reduction Requirements
0.010 mg/L
0.010 mg/L
0.002 mg/L
0.002 mg/L
0.005 mg/L
0.6 mg/L
0.003 mg/L
0.04 mg/L
Average Influent Challenge Maximum Average Minimum %
Influent Concentration Effluent Effluent Reduction
2.0182 mg/L 2.0 mg/L + 10% 0.06 mg/L ** 0.0536 mg/L 97.03 1333333 #/mL At east 10,000 part c es/mL 6600 #/mL 2325 #/mL 99.51
Average
Influent
0.1533 mg/L
0.1400 mg/L
0.0058 mg/L
0.0059 mg/L
0.0154 mg/L
1.7571 mg/L
0.015 mg/L
0.0819 mg/L
Influent Challenge
Concentration
0.15 mg/L_+ 10%
0.15 mg/L_+ 10%
0.006 mg/L _+10%
0.006 mg/L _+10%
0.015 mg/L _+10%
1.8 mg/L _+10%
0.015 mg/L _+10%
0.08 mg/L _+10%
• The product is for cold water use only.
• Do not use with water that is microbiologically unsafe or of
• Refer to the "Warranty" section for the Manufacturer's name,
• Refer to the "Warranty" section for the Manufacturer's limited
unknown quality without adequate disinfection before or after the system.
address and telephone number.
warranty.
Maximum Effluent
0.0005 mg/L
0.0007 mg/L
0.0002 mg/L
0.0005 mg/L
0.0012 mg/L
0.0250 mg/L
0.001 mg/L
0.0400 mg/L
Average Effluent
0.0005 mg/L
0.0006 mg/L
0.0002 mg/L
0.0003 mg/L
0.0006 mg/L
0.0066 mg/L
0.001 mg/L
0.0213 mg/L
Minimum % Reduction
99.67
99.50
96.54
91.57
92.22
98.58
93.33
51.13
Application Guidelines/Water Supply Parameters
Water Supply City or Well Water Pressure 30 - 120 psi (207 - 827 kPa)
Water Temperature 33° - 100°F (0.6° - 37.8°C) Service Flow Rate 0.85 gpm (3.2 Lpm) @60 psi
Average % Reduction
97.34
99.83
Average % Reduction
99.67
99.57
96.54
94.92
96.34
99.63
93.33
74.00
*Class II particle size: 1 um to <5 um
**Test requirement is at least 100,000 particles/mL of AC Fine Test Dust.
***Compliant for Lead reduction requirements under NSF/ANSl Standard 53 as tested by Pace Analytical Services, Inc.
® NSF is a registered trademark of NSF International.
8
Loading...
+ 16 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use