Page 1
JENN-AIR® DETAILED PLANNING DIMENSIONS
G
I
H
J
K
L
M
115º
G
24" COLUMN REFRIGERATOR
(BASE UNIT REQUIRES SUITE-COORDINATING PANEL KIT OR CUSTOM PANELS AND HANDLES)
JBRFR24IGX, JBRFL24IGX – 237⁄8" x 837⁄16" x 2343⁄64" (without door/handles)
PRODUCT DIMENSIONS
1 of 3
A
B
FRONT VIEW
115º
TOP VIEW
JBRFR24IGX
MODEL #
JBRFL24IGX
in cm
Width of door 233⁄4 60.3
A
Overall width 237⁄8 60.6
B
Height of door handle
Pro-Style® Stainless
C
D
E
C
Euro-Style Stainless 501⁄64 127.1
Custom panel (3⁄4"/1.9 cm)*
Height to top of door handle
Pro-Style® Stainless
D
Euro-Style Stainless 6817⁄64 173.4
Custom panel (
Height of door 797⁄8 202.9
E
Height of bottom grille 335⁄64 9.0
F
Width of recessed refrigerator 239⁄16 59.8
G
3
⁄4"/1.9 cm)*
Width from side of refrigerator
to handle – door fully open 115°
Pro-Style® Stainless
H
4535⁄64 115.7
** **
661⁄64 167.7
** **
133⁄16
33.5
Euro-Style Stainless 1223⁄32 32.3
F
Custom panel (3⁄4"/1.9 cm)*
Width from side of refrigerator
to handle – door open 90°
Pro-Style® Stainless
I
** **
41⁄32
10.2
Euro-Style Stainless 37⁄16 8.7
Custom panel (3⁄4"/1.9 cm)*
Depth without door panel kit 2343⁄64 60.1
J
Depth with door
H
I
J
K
L
M
Pro-Style® Stainless
K
Euro-Style Stainless 241⁄2 62.2
Custom panel (3⁄4"/1.9 cm)* 241⁄2 62.2
Depth with handle
Pro-Style® Stainless
L
M
*Custom panels should not exceed 3⁄4" (1.9 cm) thickness.
**For custom panel models, this depends on handle chosen.
Euro-Style Stainless 2617⁄32 67.4
Custom panel (3⁄4"/1.9 cm)*
Depth with door open 90° 507⁄16 128.1
** **
241⁄2 62.2
271⁄8 68.9
** **
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide
before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
9002AdZw817
Page 2
JENN-AIR® DETAILED PLANNING DIMENSIONS
G
I
H
J
K
L
M
24" COLUMN REFRIGERATOR
(BASE UNIT REQUIRES SUITE-COORDINATING PANEL KIT OR CUSTOM PANELS AND HANDLES)
JBRFR24IGX, JBRFL24IGX – 237⁄8" x 837⁄16" x 2343⁄64" (without door/handles)
DIMENSIONS AS INSTALLED
2 of 3
B
C
D
MODEL #
E
Height of recessed refrigerator 8319⁄64 211.6
A*
Depth with door open 90° (min.) 507⁄16 128.1
B
Depth with handle (min.)
Pro-Style® Stainless
C
Euro-Style Stainless 2617⁄32 67.4
Custom panel (3⁄4"/1.9 cm)**
Depth with door (min.)
Pro-Style® Stainless
D
Euro-Style Stainless 241⁄2 62.2
A*
Custom panel (3⁄4"/1.9 cm)** 241⁄2 62.2
Depth without door panel kit (min.) 2343⁄64 60.1
E
* Add 1" (2.5 cm) to the height dimension when leveling legs are fully
extended.
**Custom panels should not exceed 3⁄4" (1.9 cm) thickness.
†
For custom panel models, this depends on handle chosen.
JBRFR24IGX
JBRFL24IGX
in cm
271⁄8 68.9
† †
241⁄2 62.2
SIDE VIEW
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide
before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
9002AdZw817
Page 3
JENN-AIR® DETAILED PLANNING DIMENSIONS
A
D
C
F
G
I
H
J
E
D
C
B
K
L
B
A*
M
E
115º
3 of 3
24" COLUMN REFRIGERATOR
(BASE UNIT REQUIRES SUITE-COORDINATING PANEL KIT OR CUSTOM PANELS AND HANDLES)
JBRFR24IGX, JBRFL24IGX – 237⁄8" x 837⁄16" x 2343⁄64" (without door/handles)
OPENING/CLEARANCE DIMENSIONS
A*A
B
D
e, w
FRONT VIEW
E
F
C*
JBRFR24IGX
JBRFL24IGX
MODEL #
in cm
Height (min.) 84 213.4
B
Depth (min.) 25 63.5
C*
Width of recommended electrical
D
location
Height of recommended electrical
E
location
Height to recommended electrical
F
location
e
Recommended electrical connection location
w
Recommended water connection location
* A minimum 8" (20.3 cm) furniture return must extend behind the face
of the cabinet on all sides.
20 50.8
61⁄2 16.5
41⁄2 11.4
Width (min.) 24 61.0
A
ELECTRICAL REQUIREMENTS
115 volt, 60 Hz, AC only, 15- or 20-amp fused, grounded circuit is
required. A dedicated circuit is recommended. Use an outlet that cannot
be turned off by a switch. Do not use an extension cord.
WATER PRESSURE REQUIREMENTS
A cold water supply with water pressure between 40 and 120 psi (207
and 827 kPa) is required to operate the ice maker. Call a licensed,
qualified plumber with any questions about the water pressure.
Reverse Osmosis Water Supply
A reverse osmosis system may be used provided that the water pressure
from the filtration system meets the required water pressure
requirements.
Jenn-Air Columns feature an auto-bypass water filtration system. To use
your product with a reverse osmosis water filtration system, simply
remove the water filter from the product.
LOCATION REQUIREMENTS
Floor must be able to support the product’s total weight of more than
600 lb (272 kg), including the door panels and contents of the product.
Flooring under product must be at the same level as the room. Face of
cabinetry must be plumb.
BACK VIEW
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide
before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
9002AdZw817
Loading...