Jbsystems light 6 LIGHT User Manual

WWW.BEGLEC.COM

Operation Manual

Mode d'emploi

Gebruiksaanwijzing

Bedienungsanleitung

Manual de instrucciones

Manual do utilizador

EN

FR
NL
DU
ES

PT

Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited.

Copyright © 2005 by BEGLEC cva.

Version: 1.1

EN - DISPOSAL OF THE DEVICE

Dispose of the unit and used batteries in an environment friendly manner
according to your country regulations.

FR - DÉCLASSER L’APPAREIL

Débarrassez-vous de l’appareil et des piles usagées de manière écologique
Conformément aux dispositions légales de votre pays.

NL - VERWIJDEREN VAN HET APPARAAT

Verwijder het toestel en de gebruikte batterijen op een milieuvriendelijke
manier conform de in uw land geldende voorschriften.

DU - ENTSORGUNG DES GERÄTS

Entsorgen Sie das Gerät und die Batterien auf umweltfreundliche Art und
Weise gemäß den Vorschriften Ihres Landes.

ES - DESHACERSE DEL APARATO

Reciclar el aparato y pilas usadas de forma ecologica conforme a las
disposiciones legales de su pais.

PT - COMO DESFAZER-SE DA UNIDADE

Tente reciclar a unidade e as pilhas usadas respeitando o ambiente e em
conformidade com as normas vigentes no seu país.

ENGLISH OPERATION MANUAL

Thank you for buying this JB Systems product. To take full advantage of all possibilities and for your own
safety, please read these operating instructions very carefully before you start using this unit.

FEATURES

This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.

• This device has been designed to produce decorative effect lighting and is used in light show systems.

• Music controlled running light.

• 6 output channels

• Modular: makes it possible to change the shape of the setup

• Adjustable speed and music sensitivity

ENGLISH OPERATION MANUAL

• Check that the available voltage is not higher than the one stated on the rear panel of the unit.

• The power cord should always be in perfect condition: switch the unit immediately off when the power cord

is squashed or damaged.

• Never let the power-cord come into contact with other cables!

• Don’t connect the unit to any dimmer pack.

• Always use an appropriate and certified safety cable when installing the unit.

• In order to prevent electric shock, do not open the cover. Apart from the lamp and mains fuse there are no

user serviceable parts inside.

• Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same
type and electrical specifications!

• In the event of serious operating problems, stop using the fixture and contact your dealer immediately.

• Please use the original packing when the device is to be transported.

• Due to safety reasons it is prohibited to make unauthorized modifications to the unit.

Important: Never look directly into the light source! Don’t use the effect in the presence of persons suffering
from epilepsy.

DESCRIPTION:

BEFORE USE

• Before you start using this unit, please check if there’s no transportation damage. Should there be any, do
not use the device and consult your dealer first.

• Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling are not subject to warranty. The dealer will not accept responsibility for any resulting
defects or problems caused by disregarding this user manual.

• Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.

SAFETY INSTRUCTIONS:

• To protect the environment, please try to recycle the packing material as much as possible.

• A new light effect sometimes causes some unwanted smoke and/or smell. This is normal and disappears

after some minutes.

• To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

• To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when

bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full
performance or may even cause damages.

• This unit is for indoor use only.

• Don’t place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign

object enters the unit, immediately disconnect the mains power.

• Locate the fixture in a well ventilated spot, away from any flammable materials and/or liquids. The fixture
must be fixed at least 50cm from surrounding walls.

• Don’t cover any ventilation openings as this may result in overheating.

• Prevent use in dusty environments and clean the unit regularly.

• Keep the unit away from children.

• Inexperienced persons should not operate this device.

• Maximum save ambient temperature is 45°C. Don’t use this unit at higher ambient temperatures.

• The units’ lamp temperature may reach up to 200°C. Don’t touch the lamps with bare hands during its

operation.

• Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.

• Allow the device about 10 minutes to cool down before replacing the bulb or start servicing.

• Always unplug the unit when it is not used for a longer time or before replacing the bulb or start servicing.

JB SYSTEMS® 1/18 SIXLIGHT

1. 6 lamp modules with colored lamps

2. Music sensitivity control for the internal microphone

3. Basic speed control of the running light

4. Mains switch

5. Internal microphone

6. Outputs of the running light module, all six lamp modules must be connected to these outputs.

LAMP (RE)PLACEMENT

• Switch off the unit and unplug the mains cable.

• Wait for about 10 minutes until the unit has been cooled down.

• Unplug the old lamps.

• Put the new lamps into the socket.

Attention! Check the label on the backside of the device or see the technical specifications in this manual
to know which lamp should be used. Never install lamps with a higher wattage! Lamps with higher wattage
generate temperatures the device was not designed for. If the device uses a lamp transformer, it will burn
due to current overload.

• Done!

JB SYSTEMS® 2/18 SIXLIGHT

In case of replacement of the lamp or maintenance, do not open the fixture within 10
minutes until the unit cools down after switching off. Always unplug the unit before
servicing! Always use the same type of spare parts (bulbs, fuses, etc.) When replacing
parts, please only genuine spare parts.

ENGLISH OPERATION MANUAL

RIGGING

• Install the unit on a plane surface.

• Locate the fixture in a well ventilated spot, far away from any flammable materials and/or liquids. The

fixture must be fixed at least 50cm from surrounding walls.

• Don’t cover any ventilation openings as this may result in overheating.

OPERATING INSTRUCTIONS

• Once connected to the mains the device can be switched on and off with the mains switch.

• The chaser speed can be adjusted with the speed control (3).

• You can adjust the microphone sensitivity with the music control (2).

• Regular breaks during operation are essential to maximize the life of this device as it is not designed for

continual use.

• Always unplug the unit when it is not used for a longer time or before replacing the bulb or start servicing.

• In the event of serious operating problems, stop using the fixture and contact your dealer immediately.

• Important: Never look directly into the light source! Don’t use the effect in the presence of persons

suffering from epilepsy.

MAINTENANCE

Clean by wiping with a polished cloth slightly dipped with water. Avoid getting water inside the unit. Do not
use volatile liquids such as benzene or thinner which will damage the unit.

SPECIFICATIONS

Mains Input: AC 230V, 50Hz
Fuse: 250V 2A slow blow (20mm glass)
Sound Control: Internal microphone
Lamps: 6x R80 colored lamps 40W / 230V E27
Size: 37 x 37 x 17cm
Weight: 2kg

Every information is subject to change without prior notice

FRANÇAIS MODE D’EMPLOI

Merci d’avoir choisi ce produit JB Systems. Pour votre sécurité et pour une utilisation optimale de toutes les
possibilités de l’appareil, lisez attentivement cette notice avant utilisation.

CARACTERISTIQUES

Cet appareil ne produit pas d’interférences radio. Il répond aux exigences nationales et européennes. La
conformité a été établie et les déclarations et documents correspondants ont été déposés par le fabricant.

• Cet appareil a été conçu pour la production d’effets lumière décoratifs et est utilisé dans des spectacles
lumineux.

• Chénillard avec micro incorporé

• 6 canaux

• Modulaire: possibilité de changer la forme de l’appareil

• Vitesse et sensitivité audio réglable

AVANT UTILISATION

• Avant d’utiliser cet appareil, assurez-vous de l’absence de dommage lié au transport. En cas
d’endommagement, n’utilisez pas l’appareil et contactez le vendeur.

• Important: Cet appareil a quitté notre usine en parfaite condition et bien emballé. Il est primordial que
l’utilisateur suive les instructions de sécurité et avertissements inclus dans ce manuel. La garantie ne
s’applique pas en cas de dommage lié à une utilisation incorrecte. Le vendeur ne prend pas la
responsabilité des défauts ou de tout problème résultant du fait de n’avoir pas tenu compte des mises en
garde de ce manuel.

• Conservez ce manuel dans un endroit sûr pour toute consultation future. Si vous vendez l’appareil,
assurez-vous d’y joindre ce manuel également.

INSTRUCTIONS DE SECURITE:

• Afin de protéger l’environnement, merci de recycler les emballages autant que possible.

• Un nouvel effet lumière peut provoquer de la fumée et/ou une odeur non souhaitée, disparaissant après

quelques minutes.

• Afin d’éviter tout risque d’incendie ou de choc électrique, ne pas exposer cet appareil à la pluie ou
l’humidité.

• Pour éviter la formation de condensation à l’intérieur de l’appareil, patientez quelques minutes pour laisser
l’appareil s’adapter à la température ambiante lorsqu’il arrive dans une pièce chauffée après le transport.
La condensation empêche l’unité de fonctionner en performance optimale et peut même causer des
dommages.

• Cette unité est destinée à une utilisation à l’intérieur uniquement.

• Ne pas insérer d’objet métallique ou verser un liquide dans l’appareil. Risque de choc électrique ou de

dysfonctionnement. Si un corps étranger est introduit dans l’unité, déconnectez immédiatement de la
source d’alimentation.

• Placez l’appareil dans un endroit bien ventilé, éloigné de tout matériau ou liquide inflammable. L’appareil
doit être fixé à 50cm minimum des murs.

• Ne pas couvrir les ouvertures de ventilation, un risque de surchauffe en résulterait.

• Ne pas utiliser dans un environnement poussiéreux et nettoyez l’unité régulièrement.

• Ne pas laisser l’unité à portée des enfants.

• Les personnes non expérimentées ne doivent pas utiliser cet appareil.

• La température ambiante maximum d’utilisation de l’appareil est de 45°C. Ne pas l’utiliser au-delà de cette

température.

• La température des lampes peut atteindre 200°C. Ne pas toucher les lampes à mains nues en cours de
fonctionnement.

JB SYSTEMS® 3/18 SIXLIGHT

JB SYSTEMS® 4/18 SIXLIGHT