JBL SR4725X/F Technical Manual

Page 1
JBL Incorporated, 8500 Balboa Boulevard, P.O.Box 2200, Northridge, California 91329 U.S.A.
JBL SR4725X/F REV F
PACKAGE
WIRING DIAGRAM
01-08
Technical Manual
JBL SR4725X/F
SPECIFICATIONS
• Nominal Impedance: 8 ohms
• Power Capacity: 600W Continuous Pink Noise
• Frequency Range: 35 Hz – 18 kHz (–10dB)
• Sensitivity: 98 dB SPL, 1 Watt @1 Meter
• Crossover Frequency: 1.1 kHz
SYSTEM COMPONENTS:
• Cabinet: SR4725X (Not For Sale)
• Grille: 128-00416-00
• Low Frequency 380mm (15 in.) Paper Cone Transducer: Transducer (2226HPL)
• DC Resistance: 5.0 ohm ±10% Aluminum Wire
• High Frequency 25mm (1 in.Exit) Pure Titanium Transducer: Compression Driver (2426H)
• DC Resistance: 3.2 ohm ±8% Aluminum Wire
SYSTEM COMPONENTS:
(Cont’d)
• Crossover Network: 129-20058-01
AURAL SWEEP TEST SPECIFICATIONS:
A. System Aural Sweep Test: 7.0V Input, 20 Hz to 20 kHz B. L.F. Aural Sweep Test: 14.5V Input, 20 Hz to 1.2 kHz C. H.F. Aural Sweep Test: 2.0V Input, 550 kHz to 20 kHz
PHYSICAL SPECIFICATIONS:
• Enclosure Dimensions: 717.6mm x 616mm x 435mm D (28.3 x 24.3 x 17.1 in. D)
• Shipping Weight: 95 lbs. (43.1kg.)
WARRANTY INFORMATION:
• Refer to Warranty Statement packed with each product.
Warranty 59660 User’s Guide SR-X Series 981-00052-04
Carton SR4725X 990-00189-00
Microfoam (8) Packaging 49790P
Filler, (2) Top & Bottom 991-00179-02
Network 129-20058-01
SCHEMATIC (129-20058-01)
Speaker, HighFreq 2426H Diaph Repl D8R2425
Speaker, Low Freq 2226HPL Cone Repl C8R2226
GRN
YEL
GRN/BLK
YEL/BLK
FULL RANGE
BI AMP
FEMALE
CONNECTION
SP CROSSOVER PC BOARD
SPXXX T/C PC BOARD
L1
1.63mH
R1
12.5 15W
RED
RED WHT
GRN BLK
BLK BLU
BLU
YEL/BLK
GRN/BLK
YEL
YEL
C3 8µF
C4 4µF
C1 33µF
C2 3µF
L2
0.9mH
+
+
YEL +
YEL/BLK
GRN/BLK
GRN +
L.F. 2226HPL
H.F. 2426H
1 2
2
+2
3 4
1
+
1
2 3 4
1 2 3 4
1
Page 2
JBL SR4725X/F
JBL SR4725X/F
COMPONENT EXPLODED VIEW
Screw (10) 882-51110-12 6 x 3/4 OV PH
Screw (4) 882-51110-12 6 x 3/4 OV PH
Screw 883-31110-40 No.8 x 2 1/2 TR PH PD
Grille Support (2) 389-0032-00
Screw (8) 804-01110-16 10-32 x 1 FIL PH BLK ZINC
Gasket 68670
Gasket 73881
Screw (8) 804-41110-12 10-32 x 3/4 PAN,PH,BLK, ZINC,LCS
Screw (12) 884-41110-12 10 x 3/4 PNHD PH PB THD
Speaker, Low Freq 2226HPL Cone Repl C8R2226
Screw (10) 806-11010-20 1/4-20 x 1-1/4 FLHD PH BLK
Screw (4) 884-41210-16 No.10 x 1 RD HD
Screw (6) 882-51110-12 No.6 x 3/4 OV PH
Speaker, High Freq 2426H Diaph Repl D8R2425
Network 129-20058-01
Network 129-20058-01
Binding Post RED 33750 BLK 33751
Foot (4) 924-00013-00
Stand-Off 819-00000-00
T-Nut (8) 61861 No.10-32
T-Nut (8) 61861 No.10-32
T-Nut (10) 21904 1/4-20 x 9/16 BLK
Port Tube (2) 56144 (Not For Sale)
Horn 2370A
Bolt (3) 354-00000-14 1/4-20 x 7/8 HXHD ZINC
Grille 128-00416-00
Trim, Grille (2) 382-00336-05
Name Plate 950-00037-00
Cabinet (Not For Sale)
Gasket, Handle (2) 382-00337-00
Gasket (4) 71129-01
Handle (2) 923-00022-00
NOTE: DURAFLEX REPAIR KIT 30052
Page 3
Suspending this system should only be done by qualified persons following safe rigging standards.
Remember: the w
eakest component determines the size and safety of the entire array! CAUTION! Before suspending any array always inspect all components of the array (enclosure, truss module, threaded fasteners, connecting hardware, and lifting hardware) for cracks, deformations, corrosion, missing or damaged parts that could reduce strength and safety of the array. Use only load rated hardware.Building structural supports and hoist motors require inspection prior to each use by knowledgeable professionals. Never exceed maximum recommended load ratings.
In the event that the track has suffered damage, replace only with the correct part (see below) from JBL professional. Replacement with par ts from other sources may result in suspension failure.
Track 3” fly ware par t number 390-00012-00 Track 8” fly ware par t number 390-00013-00
The only fitting load-rated for over head use is a SMI (909) 878-9104 part number SM-61B “L” Double Indexing locking Swivel Ring Fitting or a ATM (310) 834-5914 part number AMTS-3SF.
CAUTION!
JBL SR4725A
JBL SR4725X/F
Loading...