JBL On Stage IIIP User Manual

User Guide

English ........................ 3

Deutsch .......................

Français ..................... 16

Español ..................... 23

Italiano ...................... 30

Dutch .........................37

Korean ....................... 44

Norwegian .................51

Danish ........................58

Japanese .................... 65

Simplifi ed Chinese .... 72

Finnish ...................... 79

Swedish ..................... 86

Russian ..................... 93

iPhone and iPod not included / iPhone et iPod non inclus

9

JBL On Stage™* IIIP portable loudspeaker dock for iPhone and iPod

TM

JBL On Stage

*

IIIP Important Safety Instructions

Please read the following precautions before use:

• Read these instructions, heed all warnings, and keep for future reference.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings; a minimum distance of 10mm around the entire apparatus is
required for suffi cient ventilation.

• No naked fl ame sources such as lighted candles should be placed on or near apparatus.

• Attention should be drawn to the environmental aspects of battery disposal.

• Apparatus is to be used in moderate climates only.

• Do not install near any heat sources such as radiators, heat registers, stoves or other apparatuses
(including amplifi ers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarizing plug has two
blades with one wider than the other. A grounding-type plug has two blades and a third grounding
prong. The wide blade or third prong is provided for safety. If the provided plug does not fi t into your
outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched, particularly at the plugs and convenience
receptacles, and at the point where they exit from the apparatus.

• Only use attachments/accessories specifi ed by the manufacturer.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, or the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.

• To be completely disconnected from the power input, the main plug of AC/DC adaptor shall be
disconnected from the main.

• The main plug of AC/DC adaptor should not be obstructed OR should be easily accessed during
intended use.

• The marking information is located at the bottom of apparatus.

• Battery shall not be exposed to excessive heat such as sunshine, fi re or the like.

• The apparatus and AC/DC adaptor shall not be exposed to dripping or splashing and that no objects
fi lled with liquids, such as vases, shall be placed on apparatus and AC/DC adaptor.

• TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE
ARE NO USER-SERVICEABLE PARTS INSIDE THIS UNIT. PLEASE REFER SERVICING TO QUALI­FIED HARMAN CONSUMER GROUP, INC., SERVICE PERSONNEL.

• Never remove grille covers in order to service the speaker system. The speaker system does not
contain any user-serviceable parts.

IMPORTANT:

The approp riate adapter mus t be installed b efore inser ting your iPod
into the JBL On St age IIIP. Make sure that the iPod conne ctor is
properl y aligned with the JBL O n Stage IIIP’s connec tor when instal ling
your iPod. Failu re to do so may cause pe rmanent damage to t he iPod
connect or, rendering the iP od inoperabl e.

Important Note for All Electronic Products:

Before inserting or unplugging audio cables from the source device’s
headphones or line-level output jacks, it is good practice to turn off
the device fi rst. This will prolong the life of your unit, help protect
your device from static electricity and prevent potential damage.

WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.

WARNING: THE APPARATUS SHOULD NOT BE
EXPOSED TO DRIPPING OR SPLASHING AND NO
OBJECTS FILLED WITH LIQUID, SUCH AS VASES, SHOULD
BE PLACED ON THE APPARATUS.

THE LIGHTNING
FLASH AND
ARROWHEAD
WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU
TO DANGEROUS
VOLTAGE INSIDE
THE PRODUCT.

CAUTION

RISK OF ELECTRIC SHOCK DO

NOT OPEN

CAUTION: TO REDUCE
THE RISK OF SHOCK, DO
NOT REMOVE COVER. NO
USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.

THE EXCLAMA­TION POINT
WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU
TO IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.

fcc regulations

FCC Declaration of Conformity Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference; and (2) this device must accept any interference received, including device may not cause harmful interference; and (2) this device must accept any interference received, including

interference that may cause undesired operation.interference that may cause undesired operation.

Radio and Television Interference

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause interference to radio or television reception, which can be determined by turning the If this equipment does cause interference to radio or television reception, which can be determined by turning the
equipment off and then on, the user is encouraged to try to correct the interference by one or more of the following equipment off and then on, the user is encouraged to try to correct the interference by one or more of the following
measures:measures:

• Increase the separation between the equipment and receiver.• Increase the separation between the equipment and receiver.

• Connect the equipment to a different outlet so that the equipment and receiver are on different • Connect the equipment to a different outlet so that the equipment and receiver are on different
branch circuits.branch circuits.

• Consult the dealer or an experienced radio/TV technician for help.• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifi cations not expressly approved by JBL, Inc., could void the user’s authority to Changes or modifi cations not expressly approved by JBL, Inc., could void the user’s authority to
operate the equipment. operate the equipment.

33

Unpacking

Carefully unpack your JBL On Stage™* IIIP and identify all
its components:

Getting to know your JBL On Stage IIIP

1. JBL On Stage IIIP

2. Power adapter

3. IR remote

MENU

4. Dock adapter for iPod

5. 3.5mm Audio cable

Audio In

12VDC In

Adapters for iPod

For detailed information regarding selection, installation and removal of the dock
adapters, visit www.jbl.com.

To remove an adapter, inser t a fl at-head screwdriver (sold separately) into the slot on
the back of the adapter and lift up.

Make sure your iPod is securely docked into the JBL On Stage IIIP, using the correct
adapter.

44

55

JBL On Stage IIIP easy setup guide

MENU

Step 1. Unpack the JBL On Stage IIIP,
adapter, remote control, power
adapter and input cable. Read these
instructions completely.

Step 2. Rotate the battery door to
the unlocked position to open the
battery compartment.

Step 3. Place 6 AA batteries in the
battery compartment.

Step 4. Connect the power adapter
into the input marked on the rear
of the JBL On Stage IIIP; plug the
power adapter into a wall outlet or
power strip.

or

Step 5. Place the appropriate iPod adapter onto JBL On Stage IIIP.
Place your iPod on the docking connector or connect the audio input
cable to the rear of the JBL On Stage IIIP. Connect the audio cable to
the audio source.

Step 6. Press the Power button on
the back of the JBL On Stage IIIP.
A green LED will light when the
JBL On Stage IIIP system is on.

Step 7. Adjust the volume using
(+) to increase and (–) to decrease.
Press both to mute the JBL On
Stage IIIP. Press either button to
unmute.

Battery Disposal

Alkaline batteries are considered nonhazardous and can be disposed of with your regular household trash.
Rechargeable batteries (i.e., nickel cadmium, nickel metal-hydride, lithium and lithium-ion) are considered hazardous household materials and may pose an unnecessary health and safety risk. Unwanted materials should be disposed of in an
environmentally sound manner. Contact your local waste management offi cials for other information regarding the environmentally sound collection, recycling and disposal of used batteries.

DO NOT MIX BATTERY TYPES
DO NOT MIX CHARGED AND PARTIALLY CHARGED BATTERIES
BATTERIES WILL NOT RECHARGE WHILE IN JBL ON STAGE IIIP

JBL On Stage IIIP remote easy setup guide

MENU

Navigation Control Mode

Turn iPod on: Press any button on the remote control to wake the iPod.
Turn iPod off: Press and hold the Play/Pause button for two seconds.
Bring up iPod menu: Press the Menu button.

Volume Down

iPod Play/Pause

iPod Previous/Rewind

iPod Scroll Up

iPod Menu

JBL 10-Button Remote Technical
Specifi cations

Tran smis sio n: I R
Freque ncy: 3 8kHz
Operating Range: 20 feet
Batter y Type: CR 2025 3V
Dimensions:
Width: 1. 29"(33mm)
Height: 3 .38" (86mm)
Depth: 0.23" (6mm)
Weight (inclu ding battery ): 1.2 oz.

Volume Up

Mute/Unmute

iPod Next/Fast Forward

iPod Scroll Down

iPod Select/Enter

Scroll up: Press the Scroll Up button.
Scroll down: Press the Scroll Down button.
Go to previous menu: Press the Menu but ton.
Select menu/track/feature: Press the Select button.

Music Control Mode

Play a track: Press the Play/Pause button.
Note:Note: If the iPod is at the Main Menu, pressing

Pause a track: Press the Play/Pause button while a song is playing.
Skip to next track: Press the Next/Fast Forward button.
Skip to previous track: Press the Previous/Rewind button.
Fast-advance track: Press and hold the Next/Fast Forward button.
Fast-reverse track: Press and hold the Previous/Rewind button.
Increase volume: Press the Volume Up button.
Decrease volume: Press the Volume Down button.
Mute: Press the Mute/Unmute button.
Go to previous menu: Press the Menu but ton.
Select menu/track/feature: Press the Select/Enter button.

P

lay/Pause will cause the iPod to start playing all of

its music.

66

77

troubleshooting your JBL On Stage IIIP

Technical Specifi cations

Symptom Possible Problem Solution

Sound Quality

Frequency Response:
70Hz – 20kHz

Power Consumption:
20W Maximum

Power Input:
12V/1.5A

JBL On Stage IIIP Transducer:
(4) 1" Full range per channel

Dimensions:
Diameter – 7 1/2"(190mm)
Height – 2" (51mm)

System Weight:

1.12 lb (0.51kg)
Battery:

Size – AA
Type – Alkaline, NiMh

DO NOT MIX BATTERY TYPES.
DO NOT MIX CHARGED AND

PARTIALLY CHARGED BATTERIES.
BATTERIES WILL NOT RECHARGE

WHILE IN JBL ON STAGE IIIP.

If you have any questions or need further assistance, please visit www.jbl.com.
Features, specifi cations and appearance are subject to change without notice.

No sound from the JBL
On Stage IIIP speaker
system

No power to the system

Power adapter plug is not
inserted correctly

No volume or low volume

Input source volume is low

Low or drained batteries

iPod is paused

Ensure that the power supply is connected to a live
power source and properly connected to the JBL
On Stage IIIP. Note: When the JBL On Stage IIIP is
powered, a green power LED on the JBL On Stage IIIP
should light up.

Touch the volume “Up” (+) pad on the volume control
to unmute and/or increase the system volume level.

Note: Touching the volume “Down” (–) pad lowers
the system volume. Touching both the (+) and (–)
volume control pads at the same time will mute the
system.

Increase the volume level on the audio source device.

Replace the batteries.

Press the Play button on the iPod or remote control.

Symptom Possible Problem Solution

Sound Quality

No power; green LED is not on Wall adapter is not plugged into the JBL

On Stage IIIP correctly.

Wall adapter is not receiving AC power

Check the connection of the wall adapter.

Place the wall adapter in a known powered outlet. Test the outlet
with a lamp or other device.

Charging

iPod will not charge No power to input Check input cable connnection.

Wrong adapter is used Replace adapter.

iPod is not making full contact with the
docking station

Turn the JBL On Stage IIIP off and connect it to another wall outlet.

88

Doc ume nt N umb er : 95 0- 023 4- 001 Rev . C

JBL is a trade mark of Harman Inte rnational Indus tries, Incor porated, reg istered in the Uni ted States and/or oth er countries.
The trad emark On Stage is u sed with perm ission of OSA Intern ational, Inc.

*

iPod is a trad emark of Appl e Inc., registe red in the U.S. and o ther countrie s. iPhone is a trad emark of Apple I nc. iPod and iPhone not included. “Made for iPod” means
that an electronic accessory has been designed to connect specifi cally to iPod and has been certifi ed by the developer to meet Apple performance standards. “Works with
iPhone” means that an electronic accessory has been designed to connect specifi cally to iPhone and has been certifi ed by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

JBL est une ma rque commercial e de Harman Inter national Indust ries, Incorpo rated, dépo sée aux États- Unis et/ou dans d’autre s pays.
Le mar que “ On S tag e” e st u til isé e av ec la pe rmis sio n de OSA I nte rn atio nal , In c.

*

iPod est un e marque commerc iale de Apple In c., déposée au x États-Unis e t dans d’autres pays . iPhone est une ma rque commercial e de Apple Inc. iPod et iPho ne
non inclu s. « Made for iPod » sign ifi e qu’un acc essoire élec tronique a été co nçu pour ce conne cter spécifi que ment à l’iPod et qu e sa con for mit é au x no rme s de
perf ormances App le a été certi fi ée pa r son construc teur. « Works with iPh one » signifi e que le disposi tif électr onique a été spéc ialement conçu pour se connecter à
l’iPhone e t qu’il est cer tifi é pa r le développe ur comme confor me aux normes de p erforman ce Apple. App le n’est pas respons able du fonctionnement de ce dispositif
ou de sa con for mit é av ec l es n orm es d e sé cur ité ou r égl eme nta ire s.

Harman Consumer Group, Inc.

8500 Balboa Boulevard, Northridge, CA 91329 USA

1.516.255.4525 (USA only)

www.jbl.com

© 2008 Ha rman Internati onal Industri es, Incorpora ted. All right s reserved . Tous droit s réservés.
Document Number: 950-0234-001 Rev. C