JBL OnBeat Rumble Quick Start Guide

JBL® OnBe at RumBLe™

Quick Setup Guide

WeLcOme

Thank you for purchasing the JBL® OnBeat Rumble™ speaker dock. This quick setup guide
will show you how to connect and set up your dock.

IncLuDeD ItemS

JBL OnBeat Rumble Speaker Dock

Power Supply

AC Cord (varies by region)

cOnnectIOnS

Auxiliary

Input

Power

Connector

1. If you are going to use your JBL OnBeat Rumble speaker dock with another audio
source, plug one end of a 3.5mm (1/8") stereo cable (not supplied) into the dock’s
Auxiliary Input connector, and plug the other end into the audio source’s audio-out or
headphone-out connector.

2. If you want to use headphones (such as when previewing mixes with a DJ app), plug
them into the dock’s Headphone connector.

3. Plug the dock’s power supply into the Power connector on the rear of the dock and
then into a working AC power outlet. The dock will automatically turn on and go into the

Bluetooth

4. The USB port can be used for charging your iPod, iPhone or iPad device.

®

pairing mode (the Source button LED will be flashing blue).

USB
Connector

Headphone
Connector

PLACEMENT

Place the JBL OnBeat Rumble speaker dock on a shelf or table with the rear of its enclosure
at least 3" (76mm) away from a wall or other surface to allow the bass ports to operate
properly.

CONTROLS AND INDICATORS

Dock
Lid

Power Button

and LED

Source Button

and LED

Volume Down

Button

2

Club EQ Button
and LED

Bass Boost Button
and LED

Volume Up
Button