JBL EVO1.324 User Manual
A Loudspeaker With Intelligence
EVOi.324
User’s Guide
Introducing The Next Generation of Installed Sound
EVOi.324
EVOi.324
Safety Information . . . . . . . . . . . . . . . . . . . . . 1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Design Overview . . . . . . . . . . . . . . . . . . . . . . 3
Features
EVOi.324 Front/Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
EVOi.324 Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Hook-Up Details . . . . . . . . . . . . . . . . . . . . . . 6
Applications . . . . . . . . . . . . . . . . . . . . . . . . . 7
CONTENTS
Loudspeaker Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Coverage Angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Aiming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Multiple Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Delay Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Rectangular Rooms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Fan Shaped Rooms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Painting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 20
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . 22
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
IMPORTANT SAFETY INFORMATION - READ THIS CAREFULLY
This equipment has been tested and found to comply with the following European and international standards for Electromagnetic Compatibility and Electrical Safety:
Radiated Emmissions (EU): EN55022B (1992)
RF Immunity (EU): IEC801-3 (1994)
Electrostatic Discharge(EU): IEC801-2 (1984)
Fast Transients(EU): IEC801-4 (1988)
Electrical Safety (EU): EN60065 (1994)
Electrical Safety(USA): UL6500/ETL (1996)
Electrical Safety(CAN): CAN/CSA-E65/ETLc (1996)
Before using the apparatus read these instructions, follow all instructions, heed them and keep in a
safe place.
Clean only with a damp cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s
instructions.
Do not defeat the safety purpose of the grounding type plug. A grounding plug has two blades and a third grounding prong. The
third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience recepticals and the point where they
exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when not in use for a long time.
WARNING – TO REDUCE THE RISK OF FIRE OR SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE.
DO NOT REMOVE COVERS, NO USER SERVICABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS EQUIPMENT MUST BE GROUNDED.
CAUTION
RISK OF ELECTRONIC SHOCK
!
IT SHOULD NOT BE NECESSARY TO REMOVE ANY PROTECTIVE GROUND OR SIGNAL CABLE SHIELD
CONNECTIONS TO PREVENT GROUND LOOPS. ANY SUCH DISCONNECTIONS ARE OUTSIDE THE
RECOMMENDED PRACTICE OF JBL PROFESSIONAL AND WILL RENDER ANY EMC OR SAFETY
CERTIFICATION VOID.
For continued compliance with international EMC legislation ensure that all input and output cables are wired with the cable
screen connected to Pin 1 of the XLR connectors. The input XLR Pin 1 is connected to the chassis via a low value capacitor,
providing high immunity from ground loops while ensuring good EMC performance.
DO NOT OPEN
DO NOT EXPOSE
TO RAIN OR MOISTURE
ATTENTION
RISQUE DE CHOC ELECTRIQUE
NE PAS ENLEVER
NE PAS EXPOSER A
LA PLUIE NI L'HUMIDITE
1
INTRODUCTION
WELCOME
Thank you for purchasing an EVOi.324 Intelligent Powered
Loudspeaker. Not only is this the most compact 1300 watt
powered loudspeaker, it is also the world’s first loudspeaker
with built-in intelligence. The integrated digital technology
allows it to manage its own performance and through the
use of the optional EVOi.net Speaker System Controller,
adapt sonically to virtually any environment in which you
place it. The result is an architecturally designed installation powered loudspeaker system that provides great sound
with minimum stress.
PACKAGE CONTENTS
Upon unpacking the EVOi.324 please take note of the
contents as listed below. If you are missing any of the items
listed below, please contact your dealer as soon as possible.
1 x EVOi.324 Speaker System
1 x User’s Guide with Warranty and Tech Note No. 14,
Volume 1
1 x Accessory bag which includes:
1 x AC Cord
1 x Eyebolt Kit (3 x Shoulder Eye Bolts, 3 x Washers)
2 x Small Rubber Feet
1 x Large Rubber Foot
1 x Washer
2
EVOi.324
DESIGN OVERVIEW
The EVOi.324 has been designed specifically for fixed
installation applications. EVO is intended to be used where
high quality state-of-the-art sound reinforcement is
required, in venues such as performing arts centers,
worship spaces, educational multi-purpose rooms and other
civic venues.
It has been engineered to provide premium performance
with minimal visual impact. EVOi.324 speakers adapt to
internal décor with a paintable surface and to low ceilings
by offering the same performance in a vertical and
horizontal configuration.
Installation and setup are quick and simple to understand.
This is the fundamental principle of the EVO system,
whereby the majority of problems in system installation
and set-up are eliminated because the most complex
elements have already been designed into the loudspeaker.
EVOi.324
3
FEATURES
EVOi.324 FRONT/TOP
1
2
3
4
5
3
2
6
Figure 1 - EVOi.324 Front & Top
(Grill removed for clarity)
3 Thermomaster® Vents
1
1
Each respective baffle vent, woofer motor, and basket are
all linked via the same thermal transfer path for maximum
heat dissipation. Taking heat away from the voice coil
effectively reduces power compression. The harder the
system works, the better it cools.
4 2430 Compression Driver
The JBL 2430 neodymium large-format compression driver
has a 1.5-inch exit and 3-inch voice coil with 100 watt
power handling. The revolutionary neodymium motor
structure results in an extremely compact and lightweight
3
HF (High Frequency) transducer, weighing only 2.5 lbs.
The JBL 2430 driver is powered by an internal 100 watt
linear amplifier.
5 Aluminum Waveguide
The aluminum waveguide effectively couples the JBL 2430
driver to the outside world. It works with the LF/MF and
LF
transducers and our Filtered Array Technology (FAT™)
3
7
to achieve a constant 80° x 80° horizontal and vertical
coverage pattern.
6 Integrated Baffle
Our integrated transducer baffle and inertia grounding
straps are designed to lock all the components together,
maximizing acoustic output. The entire baffle area acts as
an open thermal window through which heat is allowed to
escape.
1 JBL Eyebolt System
Located on the top (and bottom) is our standard JBL eyebolt
system to accommodate ceiling attachment (and floor
mounting system, see Foot Kit, page 19), when required.
2 14” LF/MF Transducers
Each 14-inch, LF (Low Frequency) and LF/Mid carbonfiber cone transducer features our patented dual-coil, dualgap Neodymium Differential Drive (NDD™) technology
th
for 1/5
the weight of conventional ferrite transducers with
twice the power handling. Moreover, each transducer is
driven by its own 600 watt D-class (digital) amplifier.
4
7 SMC Enclosure
The rear enclosure, fabricated from SMC (Sheet Molding
Compound), is in the form of a 2
for inherent strength, acoustic architecture, and transparent
aesthetics.
nd
-order geometric design
SMC Grille (not shown)
It looks like cloth, but it’s actually an anti-resonant, SMCreinforced, expanded steel grill, with an enhanced high
frequency spreading effect.
EVOi.324
FEATURES
EVOi.324 REAR
8
9
10
11
12
Figure 2 - EVOi.324 Rear
8 Compact Design
EVOi.324’s design has been dedicated to applications
requiring a permanent sound reinforcement solution. For a
1,300-watt Intelligent Powered Speaker System, it weighs
only 65 pounds (29.5 kg) and stands barely 42” (1.07
meters) tall.
10 Handle/Grip
As an aid for setup, the EVOi.324 is equipped with a builtin carrying handle and grip.
11 XLR Audio / Communication
Input
EVO’s ‘brain’ is found in the EVOi.324. All transducer
controls and complex computational system functions take
place on the DSP (Digital Signal Processor) circuit board
within the aluminum housing. Working in tandem with the
optional EVOi.net, each EVOi.324 adapts to its acoustic
environment by generating its own test sequence, including
Auto-EQ and Delay Set settings. With Anti Feedback
Control, it also discriminates between feedback and
program music.
Hook-up is easy – simply use a standard XLR signal cable
to connect from an open EVOi.net Male XLR output (or
output from a mixer – see page 6) to the EVOi.324’s
Female XLR. No other cables are required. An internal
BiDAT™ (Bi-directional Data-over-Audio Transceiver)
communication system ensures that correct instructions are
sent and messages received across the signal cables.
12 Switch-Mode Power Supply
EVOi.324 uses a compact, lightweight, and highly efficient
digital power supply that does not require a large, heavy
toroidal transformer. This low-loss technology utilizes
digital modulation to regulate and supply the voltage
necessary to drive 1,300 watts of power amplification.
Insert the enclosed power cord into the IEC connector to
supply the specified AC power. (See “Hook-up Details” on
page 6 for more information.) The removable fuse protects
internal circuits. When replacing it, be sure to use the same
type as specified.
9 D-Class Amplifier
Each EVOi.324 includes two digital amplifiers that are
extremely efficient. The energy from the power supply is
rapidly switched into each loudspeaker. The audio signal is
created as modulated pulses with switching rates many times
faster than the highest audio frequency. Because energy only
flows when needed, losses are substantially reduced as
compared to an equivalent sized conventional amplifier.
EVOi.324
5
HOOK-UP DETAILS
AUDIO AND AC POWER CONNECTIONS
EVOi.324 Rear
Power
Output on Generic Mixer EVOi.net Rear
Input
AC Main
Fuse
Maximum Drive Level = +10 dBu * Sensitivity
There are three simple audio hook-up options: all require
the use of high quality balanced signal cable with a Male
XLR connector. EVOi.324 requires a drive level of +10
dBu (sensitivity = +10 dBu assuming no external equalization has been applied to the signal) for maximum performance. Hooking a microphone directly to the input will
NOT drive it sufficiently. The output of a standard mixer,
EVOi.net or EVOi.sys should provide the optimum drive
level. (See the Sensitivity Chart in the Appendix, page 21)
Power Requirements
IMPORTANT: Each individual EVOi.324 is an extremely
powerful system and is quite capable of drawing peak
currents of up to 18 amps. Please consult a qualified
electrician for correct installation and power connection.
For more information, see AC Requirements on page 21.
OR
OR
Power Cord (supplied)
Figure 3 - Basic EVOi.324 Audio and AC Connections
XLR Signal Cable
Sensitivity (direct in) +10 dBu
assuming no EQ has been applied.
EVOi.sys Rear
AC Mains
Power Cycle (Boot-up) Times
EVOi.324’s internal DSP (Digital Signal Processor) circuit
board includes software applications. Like any device
operating software programs, there is a “boot-up” time lag
before EVOi.324 becomes fully operational. The audio
signal will be muted until the loudspeaker is fully
booted up. This should take approximately 20 seconds.
Upon connecting AC mains, the green
power indicator will illuminate. After
approximately 20 seconds there will be a
very quiet click as the system releases the
!
mute. Upon power disconnection, the
green power indicator will flash several
times, however signal shut-down is
instantaneous. In summary, boot-up time
is approximately 20 seconds and shut-
down time is 0 seconds.
CAUTION: to reduce the risk of fire, replace fuse with
same type and rating: ATTENTION: utiliser un fusible de
rechange de meme type de:
115V~ T6.3A/250V~
230V~ T3.15A/250V~
* 0 dBu = 0.775 Volts; +10 dBu = 2.45 Volts
6
WARNING! When EVOi.324 is on,
the amplifier heatsink will get hot
even when no signal is being passed.
This is normal operation for D-Class
amplifiers.
EVOi.324
APPLICATIONS
INTENDED APPLICATIONS
EVO Loudspeaker Systems have been optimized for small to mid-size venues, where a pair will sufficiently reinforce
sound for an audience of up to five hundred people. They have been designed with specific applications in mind: schools
and sports facilities; places of worship; and performance venues. Typically the program of events are quite varied and high
quality reinforcement is required for speech, live music and recorded music playback. Figures 4-7 below show some typical
type venues and an identifiable area that requires sound reinforcement, we identify this as the listening area. This section
describes how to optimize the placement and position of the EVO Loudspeaker in these typical applications in order that the
entire listening area receives good sound. These are very simple instructions and are for ideal situations. As guidelines, they
are approximate and it may not be possible to follow them in all situations. In the end, final aiming decisions must be based
on what is actually heard when walking the room. Use your ears.
Schools and Sports Facilities
Figure 4
Places of Worship
Rectangular-Shaped Room
= Listening Area
Performance Venues
= Listening Area
Figure 5
Places of Worship
Fan-Shaped Room
Figure 6
EVOi.324
= Listening Area
= Listening Area
Figure 7
7
Loading...