MANUAL UPDATE JBL EON 700
1. Downloadd App iOs Android
2. Activate Blutooth on the mobile device.
3. Activate Blutooth Contol Pairing in the loudspeaker‘s main menu at > Main Menu > Settings
4. Open the app and connect to an available speaker in the setup via „Add Speakers“ by tapping „Connect“.
https://apps.apple.com/us/app/jbl-pro-connect/id1525322035 https://play.google.com/store/apps/details?id=com.harman.jbl.pro.connect
All data without guarantee. Subject to technical changes. Current information at www.audiopro.de
2
5. When „Validating“ appears in the display, the connection must be conrmed on the loudspeaker by pressing YES....
6. Now the speaker appears as
connected and you can exit the
menu via DONE.
7. Via More (bottom right) you can now access the rmware update. After
checking (update symbol) and, if necessary, downloading, update the
loudspeaker.
All data without guarantee. Subject to technical changes. Current information at www.audiopro.de
8. The update process takes 10 – 15 minutes depending on the connection quality. Before it starts, you must
conrm the pairing.
3
9. Wait until this info appears after a
second restart appears:
10. Now you can see the new rmware in
the Main Menu 6.0.1.0
All data without guarantee. Subject to technical changes. Current information at www.audiopro.de
4
ATTENTION: After the software update, the loudspeaker may not reproduce
frequencies the loudspeaker does not reproduce frequencies below 200 Hz.
In this case, you can either perform a „Factory Reset“ in
the „Main Menu“ under „Settings“ at the very bottom
– however, all user data will be lost.
Main Menu > Settings > Factory Reset Main Menu > Pass Thru & Time Allgn > HPF to this Speaker
Or you can change the frequency for „HPF to this Speaker“ in the „Main Menu“ under „Pass Thru & Time
Allgn“ back to 20 Hz. This sends the low frequencies
back to the speaker.
All data without guarantee. Subject to technical changes. Current information at www.audiopro.de
Loading...