Page 1
Professional Series
Key Features
c Excellent voice range clarity for
announcement and paging.
c High sensitivity delivers high
sound levels with minimal power
amplification.
c Focused 50° horizontal by 70° vertical
coverage for long throw capability.
c Phenolic diaphragm driver for outdoor
durability and high reliability.
c UL-registered 30-watt multi-tap
transformer, with 8 ohm direct bypass.
c Built-in high-pass filter enhances
reliability by protecting against low
frequency damage.
c Highly weather-resistant, with stainless
steel bracket and hardware.
Application
The Commercial Solutions Series
CSS-H30 Paging Horn provides excellent
voice range clarity for public address
systems, announcement/paging,
intercom, security, alarm and industrial
applications. Designed for demanding
environmental conditions, the CSS-H30 is
highly weather resistant (IP-65 rated) so
it can be used in either indoor or outdoor
applications. The focused coverage
pattern allows the horn to project the
sound a farther distance than is the
case with wider-coverage paging horns.
Typical applications for this product
are public access areas, warehouses,
factories, schools, recreational facilities,
commercial buildings, distribution
centers, civic centers, and other
commercial sound and protectivesignaling systems.
The CSS-H30 includes a UL-registered
30-watt multi-tap transformer for use with
70V or 100V distributed speaker lines.
The power tap switch is screwdriver
adjustable for easily changing settings
from 30W, 15W, 7.5W, 3.8W (and 1.9W
at 70V only). For non-distributed systems
there is an 8 ohm bypass position.
Connection is via bare wire on a built-in
jacketed cable with water-tight entrance
to the speaker.
The transducer diaphragm is sturdy
phenolic material to enhance durability,
especially in outdoor applications, and
to resist deformation under stressful
temperature conditions. To further
increase reliability, a 350 Hz high-pass
filter is built-in to protect the paging horn
against damage from frequencies below
the operational frequency band. The horn
is constructed from sturdy ABS plastic
and exterior hardware is corrosionresistant stainless steel. A stainless steel
mounting bracket is included.
CSS-H30
30 Watt Paging Horn
Specifications:
System:
Frequency Response (-10 dB)1: 380 Hz – 6 kHz
Coverage Pattern: 50° horizontal by 70° vertical (at 2 kHz and averaged
Included High-Pass Filter: Passive 350 Hz high-pass filter built-in to protect
Directivity Factor (Q): 15.8 (2 kHz)
Directivity Index (DI): 12 (2 kHz)
System Power Rating2: 30 W (120 W peak), 100 hrs.
Sensitivity (1W, 2.83V@ 1m): 108 dB, ave. 1 kHz – 6 kHz
Maximum SPL (1m)3: 123 dB cont ave. (129 dB peak), 1 kHz – 6 kHz;
Nominal Impedance : 30W/70V, NC/100V tap: 167 ohms
Transformer Taps: 70V: 30W, 15W, 7.5W, 3.8W, 1.9W
Transducers:
Driver: 38 mm (1.5 in) diameter with phenolic diaphragm
Physical:
Horn Material: ABS
Mounting Hardware: Stainless steel powder-coated U-bracket (yolk) with
Color: RAL9016 (horn and bracket)
Input Connection: 300 mm (12 in) pigtail to bare wire; entrance via water-
Environmental: IP-65 rating per IEC529, salt spray per B117, stainless
Safety Agency: Transformer UL Registered per UL1876 “Isolating Signal
Dimensions (H x W x D): 206 x 285 x 287 mm (8.2 x 11.2 x 11.3 in) horn
Weight (ea): 4.5 lb/2.0 kg
Shipping Weight (ea): 6.0 lb/2.7 kg
Included Accessories: Stainless steel mounting bracket
1
Based on average 1 kHz – 6 kHz sensitivity
2
AES standard, one decade pink noise with 6 dB crest factor within device’s operational band, free air, 100 hr continuous.
3
Calculated, based on power rating and measured sensitivity, exclusive of power compression.
JBL continually engages in research related to product improvement. Some materials, production methods and design
refinements are introduced into existing products without notice as a routine expression of that philosophy. For this reason,
any current JBL product may differ in some respect from its published description, but will always equal or exceed the original
design specifications unless otherwise stated.
1 kHz – 4 kHz)
against damage from frequencies below operational
range.
112 dB at 1.4 kHz
127 dB cont ave. (133 dB peak), 1.4 kHz, 30W input,
8 ohm Setting
15W/70V, 30W/100V tap: 333 ohms
7.5W/70V, 15W/100V tap: 667 ohms
3.8W/70V, 7.5W/100V tap: 1333 ohms
1.9W/70V, 3.8W/100V tap: 2666 ohms
8 ohms at 8 ohm direct setting
100V: 30 W, 15W, 7.5W, 3.8W
3 x 10.4 mm (0.41 in) dia mounting holes, stainless
steel exterior hardware.
tight fitting. Wire colors: red = positive (+); black =
negative (-).
steel U-bracket and exterior hardware.
and Feedback Transformers for Use in Electronic
Equipment”
224 x 285 x 287 mm (8.9 x 11.2 x 11.3 in) including
mounting bracket. Depth excludes cable exit.
Page 2
c CSS-H30 30
37
Watt Paging Horn
Frequency Response:
1W (2.83V) input, 8 ohm setting, full-space (4p)
120
110
100
SPL (dB)
90
80
20 100 1000 10000 20000
Dimensions:
287
[11.3]
184
[7.3]
Tap Selection:
206
[8.2]
224
[8.9]
157
[6.2]
3 x 10.4 [0.41] dia
[1.5]
285
[11.2]
91
[3.6]
Dimensions in mm (inches)
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
© Copyright 2014 JBL Professional
www.jblpro.com
SS CSS-H30
CRP
02/14
Loading...