JBL AWC159 User Manual

Page 1
Professional Series
Key Features:
Highly weather-resistant IP56 rating
Consistent 90° x 90° broadband pattern control
• 380 mm (15 in) woofer with Kevlar-reinforced cone and 75 mm (3 in) voice coil.
• 38 mm (1.5 in) diaphragm compression driver with patented design and high temperature polymer diaphragm.
Extraordinary clarity for speech, with extended frequency response for music.
Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
500 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.
High-power passive crossover network.
52 Hz – 20 kHz frequency response.
300 Watt 70V/100V multi-tap (built-in transformer) or direct 8Ω low-impedance.
AWC159
All-Weather Compact 2-Way Coaxial Loudspeaker with 15" LF
Applications:
The AWC159 is a compact, coaxial-driver, 2-way, highly weather-resistant full-range loudspeaker system which is ideal for speech and music in a wide variety of applications, including sports facilities, racetracks, stadiums, fairgrounds, rodeos, skating rinks, themed entertainment venues, cruise ships, water parks, outdoor background music/paging systems, swimming pools, and a wide variety of other outdoor or indoor venue types.
The AWC159 is comprised of a high-power coaxial 380 mm (15 in) low frequency driver and 38 mm (1.5 in) high frequency compression driver. The co-axial design utilizes a unique tapered pole­piece design and transitions to the cone of the low frequency driver as a large diameter pattern control horn for the high frequencies, both eliminating high-frequency beaming which is common among this category of speaker and extending pattern control to the lowest possible frequencies. The result is a coaxial speaker with wide, extremely consistent 90° coverage on a broadband basis.
Component features include a Kevlar-reinforced low frequency cone for reliability, well-damped surround for smooth frequency response, high temperature 75 mm (3 in) voice coil and a reduced distortion design through saturated-gap magnet geometry. The high frequency compression driver features a unique patented design, high temperature polymer diaphragm, and fluid-cooling for high output levels with low distortion.
The paintable enclosure is constructed of thick ABS plus fiberglass and is heavily braced to maximize low-frequency performance. The corrosion-resistant zinc-rich extra-thick powder coated steel grille is backed with open cell foam and high thread-count mesh, providing excellent protection in the harshest environments. The system is rated IP-56, per IEC529 when installed at minimum 5° down-tilt.
The system is equipped with a 300W 70V/100V multi-tap transformer. Connection is made via outdoor-rated terminals in a recessed terminal cup. A protective terminal compartment cover is included, along with gland nut, which forms a water-tight seal with round-jacketed cable having The high frequency compression driver features a unique patented design, high temperature polymer diaphragm, and fluid-cooling for high output levels with low distortion.
A heavy-duty weather-capable zinc-rich, thick powder coated U-type mounting bracket is included.
Specifications:
System:
Long-Term System Power Rating (IEC)
Transducers:
Physical:
1
Full-space (free-field)
2
Average 1 kHz to 10 kHz
3
IEC standard, full bandwidth pink noise with 6 dB crest factor.
4
Calculated based on power rating and measured full-space sensitivity.
JBL continually engages in research related to product improvement. Changes introduced into existing products without notice are an expression of that philosophy.
Frequency Range (-10 dB)1: 52 Hz – 20 kHz
Frequency Response (±3 dB)1: 80 Hz – 20 kHz
Coverage Pattern2: 90° x 90°
Directivity Factor: 11.1 (1 kHz – 16 kHz)
Directivity Index (DI): 9.7 dB (1 kHz – 16 kHz)
Sensitivity (2.83V @ 1m): 98 dB (Ave. 80 Hz – 20 kHz)
Maximum SPL
Crossover Network: 1.5 kHz, 4th order (24 dB/oct) high-pass plus conjugate to HF, 2nd
Nominal Impedance: 8 ohms
Transformer Taps: 70V: 300W, 150W, 75W, 38W
Low Frequency Driver: Kevlar-reinforced cone with weather treatment, 75 mm (3 in) voice
High Frequency Driver: 2408H-2 38 mm (1.5 in) diaphragm and voice coil diameter, patented
Input Connection: CE-compliant covered barrier strip terminals. Barrier terminals accept
Environmental: IP56 per IEC529, with a minimum 5° downward aiming angle.
Shipping Weight: 27.7 kg (61.0 lb)
Included Accessories: U-bracket, matches loudspeaker color (gray or black), zinc-rich extra-
3
: 500 W (2000 W peak), 2 hrs.
300 W (1200 W peak), 100 hrs
4
: Direct 8: 125 dB (peaks of 131 dB)
300 W Tap: 123 dB (peaks of 129 dB)
order low-pass to LF
100V: 300W, 150W, 75W
coil.
high-temperature annular polymer diaphragm, copper-clad aluminum coil, fluid-cooled.
Enclosure: ABS with Glass enclosure, heavily braced
Attachment: Two M10 (course-thread) points for included U-bracket. M6
Dimensions: 486 x 486 x 479 mm (19.1 x 19.1 x 18.8), cabinet
Net Weight: 20.6 kg (45.5 lb), 23.4 kg (51.5 lb) with u-bracket
secondary safety attachment point on back panel.
Grille: Corrosion-resistant zinc-rich extra-thick powder coated steel grille,
3-layer assembly with foam and woven poly mesh backing.
up to 8 mm outside 4 mm inside open-lug (#6 or #8) plus bare wire up to 2.5 mm cover equipped with gland nut that forms water-tight seal with round­jacketed cables with outside diameters between 4.0 mm (0.16") and
9.0 mm (0.36")
Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for salt spray (168 hrs).
507 mm (19.9 in) depth with gland nut 546 mm (21.5 in) including bracket extending to back
Colors: Available in gray (similar to Pantone 420C) and black (-BK)
Colors: Available in gray (similar to Pantone 420C) and black (-BK)
thick powder coated, steel.
2
(12 AWG) wire or spade lugs. Terminal compartment
Page 2
AWC159
20 100 1000 10000 20000
Frequency (Hz)
65
75
85
95
105 316
100
31.6
10
3.16
SPL (dB)
Ohms
All-Weather Compact 2-Way Coaxial Loudspeaker with 15" LF
Frequency Response and Impedance
Beamwidth
Dimensions
21.5 546
19.9 507
18.8 479
7.6 194
Off-Axis Frequency Response
10
0
-10
Attenuation (dB)
-20
-30 20 100 1000 10000 20000
Frequency (Hz)
Directivity Index:
Attaching U-Bracket to Cabinet
103 [4.1]
46 [1.8]
BB
130 [5.1]
18 [0.7]
61 [2.4]
C/L
32 [1.25]
64 [2.5]
Ø 14 [0.5]
Ø 10 [0.4] (x6)
31 x 7 [1.2 x 0.3] (x4)
38 x 10 [1.5 x 0.4] (x4)
466 [18.4]
Ø 12 [0.5] (x2)
Ø 12 [0.5] (x2)
191 [7.5]
0 deg
10 deg
20 deg
30 deg
40 deg
50 deg
60 deg
70 deg
80 deg
443 [17.4]
19.1 486
19.1 486
Dimensions in IN" [mm]
Terminal Compartment
Gland nut for round jacketed cable between 4.0mm (0.16”) and 9.0mm (0.36”) O.D.
JBL Professional 8500 Balboa Boulevard, P.O. Box 2200 Northridge, California 91329 U.S.A.
© Copyright 2014 JBL Professional
www.jblpro.com
386 [15.2]
SS AWC159 CRP 10/14
34 [1.3]
Loading...