JBL AW595 User Manual

High Power 2-Way All Weather Loudspeaker

AW595

Professional Series

Key Features:

䉴

Weather-Resistant, All Fiberglass
Enclosure

䉴

90° x 50° Coverage

䉴

2265H Differential Drive®Low­Frequency Driver

䉴

2432H High Frequency Compression
Driver

䉴

Large PT™ Progressive Transition
waveguide for excellent pattern control
and low distortion

䉴

Rotatable wave guide for vertical or
horizontal orientation

䉴

Available in Gray and Black finish

䉴

400 W, 70/100V Transformer Included

䉴

U-type Mounting Bracket Included

Applications:

䉴

Sports Facilities

䉴

Themed Entertainment Venues

䉴

Outdoor Entertainment Centers

䉴

Cruise Ships

䉴

Water Parks

The AW595 is a high power,
lightweight, 2-way, full-range
loudspeaker system comprised of the
JBL Differential Drive dual voice coil
and dual magnetic gap 2265H 380 mm
(15 in) low-frequency driver and 2432H
high-frequency 38 mm (1.5 in) exit,
75 mm (3 in) voice-coil compression
driver. The large format Progressive
Transition wave-guide provides
excellent 90° x 50° coverage. The
waveguide is rotatable so the
loudspeaker system can used in either
the vertical or horizontal orientation.
The system can be operated as an 8­ohm device and is equipped with a
400W transformer for 70/100V
applications.

A corrosion-resistant extra-thick zinc­plated polyester powder coated U-type
mounting bracket is included.

The enclosure is constructed of
multilayer glass composite and is
heavily braced to maximize low­frequency performance. The 16-gauge
stainless steel grille, backed with open
cell foam and stainless steel mesh,
provides excellent protection in the
harshest environments.

The AW595 is part of JBL’s AE Series,
a versatile family of loudspeakers
intended for a wide variety of
applications.

with 1 x 15" LF & Rotatable Horn

Specifications:

System:

Long-Term System Power Rating (IEC)1: 600 W (2400 W peak), 100 hrs

Transducers:

Physical:

1

IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.

2

Calculated based on power rating and sensitivity, exclusive of power compression.

3

Anechoic sensitivity in free field, no additional sensitivity gain from boundary loading.

4

Per EN54-24 Components of voice alarm system - loudspeakers 70V/400W (35V RMS, 70V peak), 100V/400W (50V RMS, 100V peak)

JBL continually engages in research related to product improvement. Changes introduced into existing products without notice
are an expression of that philosophy.

Frequency Range (-10 dB): 35 Hz – 20 kHz

Frequency Response (±3 dB): 55 Hz – 19 kHz

System Sensitivity (1W @ 1m)3: 100 dB SPL
70V / 100V Transformer Taps

Environmental Specifications: IP55C per IEC 529

horizontal cabinet orientation): (19.1 x 31.9 x 18.8 in)

Coverage Pattern: 90° x 50°, rotatable waveguide
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB

Crossover Frequency: 1.2 kHz

Maximum SPL2: 128 dB-SPL cont avg (134 dB peak)

4

: 70V: 400 W, 200 W, 100W

100V: 400W, 200W

Low Frequency Driver:

Nominal Impedance: 8 ohms

3

Sensitivity

within operational band):

High Frequency Driver:JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil

Sensitivity6(1W @ 1m): 113 dB SPL

Suspension Attachment: 2 x M10 for Included U-Bracket, 2 x M6 for aiming stabilization,

Dimensions (H x W x D in 485 x 810 x 478 mm

(1W @ 1m, 98 dB SPL

Nominal Impedance: 8 ohms

Waveguide: PT-H95HF -1

Enclosure: Hand-Laminated Fiberglass, gray gelcoat (similar to Pantone 420C),

Input Connector: CE-compliant covered barrier strip terminals. Barrier terminals accept

Net Weight: 28.3 kg (62.5 lb)

1 x JBL 2265H 380 mm (15 in.) Differential Drive®driver with 75 mm
(3 in) dual voice coil

available in black (-BK)

1 x M10 on rear for safety.

Grille: Three layer grille assemblies consisting of 16-gauge powder coated

stainless steel, backed with open cell foam and stainless steel mesh.

up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade
lugs.

䉴 AW595

20 100 1000 10000 20000

Frequency (Hz)

-30

-20

-10

0

10

Attenuation (dB)

0 deg

10 deg

20 deg

30 deg

40 deg

20 100 1000 10000 20000

Frequency (Hz)

-30

-20

-10

0

10

Attenuation (dB)

0 deg

10 deg

20 deg

30 deg

40 deg

50 deg

60 deg

70 deg

80 deg

High Power 2-Way All Weather Loudspeaker with 1 x 15" LF & Rotatable Horn

Beamwidth

360

100

Horizontal

-6 dB Beamwidth (degrees)

Horizontal Off-Axis Frequency Response Right

Attenuation (dB)

Vertical

10

20 100 1000 10000 20000

10

0

-10

-20

-30
20 100 1000 10000 20000

Frequency (Hz)

Frequency (Hz)

Horizontal Off-Axis Frequency Response Left

0 deg

10 deg

20 deg

30 deg

40 deg

50 deg

60 deg

70 deg

80 deg

Frequency Response and Impedance

110 316

100

90

SPL (dB)

80

70

20 100 1000 10000 20000

2π half-space

4π free field

Frequency (Hz)

Vertical Up Off-Axis Frequency Response

Vertical Down Off-Axis Frequency Response

10

0

-10

Attenuation (dB)

-20

100

31.6

Ohms

10

3.16

0 deg

10 deg

20 deg

30 deg

40 deg

Dimensions

Dimensions in mm (in)

For more detailed dimensional information, refer to Application Data Sheet

215.9

9

[8.50]

234.9

235.0

9

[9.2]

9. INDICATED DIMENSIONS ARE TO
CENTER OF GRAVITY (CG)

[9.2]

9

809.3

[31.86]

766.9

[30.19]

-30
20 100 1000 10000 20000

Directivity Index, Q

20

10

C

L

215.9
[8.5]

486.1

[19.14]

C

L

C

L

Directivity Index (DI), dB

0

20 100 1000 10000 20000

9

Measurements obtained in full passive crossover mode with no signal
processing. Graphs are from unaltered measured data.

478.4

[18.84]

194.2

[7.65]

C

L

Frequency (Hz)

Frequency (Hz)

C

L

100

10

Directivity Factor (Q)

1

C

L