Page 1
JBL Incorporated, 8500 Balboa Boulevard, P.O.Box 2200, Northridge, California 91329 U.S.A.
JBL AW266/-BK
REV B
PACKAGE
WIRING DIAGRAM
05-12
Technical Manual
JBL AW266/-BK
SPECIFICATIONS
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
• Nominal Impediance: 8 Ohms
• Long-Term System Power
Rating: 500W, (2000W Peak),100 hrs
• Frequency Response (±3 dB):51 Hz - 18 kHz
• Frequency Range (-10 dB): 40 Hz - 20 kHz
• Maximum SPL: 126 dB SPL (132 dB peak)
• System Sensitivity: 98 dB, 1 Watt @ 1 Meter
• Crossover Frequency: 1.1 kHz
SYSTEM COMPONENTS:
• Cabinet: Enclosure (Not for Sale)
• Grille: 445176-001(BK), 445176-002 (Gray)
• Low Frequency 2262H, 300 mm (12 in) Differential
Transducer: Drive®driver with 75 mm (3 in) dual
voice coil
• DC Resistance: 5.1 ohm
• High Frequency 2432H, 38 mm (1.5 in) exit
SYSTEM COMPONENTS:
(CONT’D)
• Transducer: compression driver, 75 mm (3 in)
vice coil
• DC Resistance: 4.0 ohm +/- 2 ohm
• Crossover Network: 5000158
AURAL SWEEP TEST SPECIFICATIONS:
A. System Aural Sweep Test: 7V Input, 10 Hz to 10 kHz
B. L.F. Aural Sweep Test: 10V Input, 10 Hz to 1 kHz
C. H.F. Aural Sweep Test: 3.0V Input, 300 Hz to 1.0 kHz
PHYSICAL SPECIFICATIONS:
• Enclosure Dimensions: 409 x 732 x 452 mm D
(16.1 x 28.8 x 17.8 in.D.)
• Net Weight: 55.5 lb (25.2 kg.)
WARRANTY INFORMATION:
• Refer to Warranty Statement packed with each product.
Warranty 59660
Network
Assembly
5000158
Wire Harness
446350-001
Driver, High Freq
2432H
(365512-001X)
Diaph Repl
D8R2432
Driver, Low Freq
2262HPL
(338312-004X)
Cone Repl
C8R2262
YEL
YEL/BLK
GRN
GRN/BLK
NOTE: INDIVIDUAL PARTS FOR THE ABOVE CROSSOVER ARE NOT AVAILABLE.
A COMPLETE REPLACEMENT ASSEMBLY SHOULD BE ORDERED.
SEE NETWORK SCHEMATIC (5000158) PAGE 2
SEE WIRE HARNESS DIAGRAM (44350-001) PAGE 3
70V/100V Transformer Taps: 70V: 400W, 200W, 100W
100V: 400W, 200W
Owner’s Manual
5012278
Carton
5012280
Top Tray
5019840
Bottom Filler
5019841
U-Bracket Filler
5019842
PKG, Mircofoam (6)
49790P
Page 2
JBL AW266/-BK
NETWORK ASSEMBLY SCHEMATIC - (500158)
JBL AW266/-BK
Connector 2-pin
Connector 4-pin
Connector 6-pin
1.50mH
0.620mH
0.360mH
13.0uF
250V
22uF
250V
4.3uF
250V
33.0uF
250V
5.6uF
250V
2.4 ohms
0.75ohms
3.9ohms
6.2ohms
Faston, Female + 0.187
Faston, Female - 0.250
+
-
Individual Parts for the above crossover are not available.
A complete replacement assembly should be ordered.
Page 3
JBL AW266/-BK
WIRE HARNESS DIAGRAM - (446350-001)
JBL AW266/-BK
BLK
RED
YEL
BLU
VIO
ORG
Molex
Connector
#0390-12025
Molex
Connector
#0015-244048
Molex Connector
#0390-12025
Molex Connector
#0015-244048
Barrier Strip
Page 4
JBL AW266/-BK
JBL AW266/-BK
COMPONENT EXPLODED VIEW
Enclosure for AW266/-BK
(Not Available for Sale)
Waveguide
443454-001
Screw (8)
804-01156-16
10-32 x 1
PH,PAN,HD,M/S 18-8
Driver, High Freq.
2432H
(365512-001X)
Diaph Repl
D8R2432
Stud (4)
75815
1/4-20 x 1.5 “ LG
Nut (4)
834-30010-00
1/4- 20
KEP,BLK ZINC,
LCS,RIGHT
Grille Assembly
445176-002 (Gray)
445176-001 (BK)
Screw (14)
802-51056-20
6-32 1 1/4
OVAL,PH,SS
Logo Badge
5007401
Driver, Low Freq.
2262HPL
(338312-004X)
Cone Repl
C8R2262
Socket Head C/S (8)
874-33156-16
10-32 x 1
Stainless Steel
Gasket
339391-001
Rear
Dome
71646-04
Gasket, Bracket (4)
5012025
Washer, Bracket (2)
5012219 (Gray)
5012026 (BK)
Screw (2)
816-93556-35
M6 x 1MM x 35MM
SS,BTN,SKT
Screw (2)
818-93756-35
M-10 - 1.5 x 35MM
BUT,HD,SOCK,C/S, 18-8
U-Bracket
5012379 (Gray)
5006098 (BK)
Screw
818-93756-35
M-10 - 1.5 x 35MM
BUT,HD,SOCK,C/S, 18-8
Washer
364542-001
3/8 x .875
STAINLESS NEOPRENE
BACK
Rear Cover,
446147-002 (Gray)
446147-001 (BK)
Screw (6)
804-51156-12
10-32 x 3/4
OVL,PAN,HD,SS 18-9
Gasket, Rear Cover
5012330
Wire Harness
446350-001
Screw (2)
803-41056-12
8-32 x 3/4
PAN,PH,SS
Transformer
445736-001
70V, 400W
Screw (4)
806-73004-10
1/4-20 x 5/8
SOC, C/S,ALY, ZINC,
CLR
Washer (4)
844-00110-06
1/4 x .06
FLTPH,REG,BLK,
ZINC,CS
Washer (4)
844-031110-05
1/4 SPLIT,HELI,BLK
Network
Assembly
50000158
Screw (6)
883-41110-12
8 x 3.4
PAN,PH,PB,BLK
ZINC,LCS
Loading...