Ultra Compact 2-way Loudspeaker
Key Features:
u
Ultra compact enclosure
u
Dual 165 mm (6.5 in) LF transducers
u
90° x 90° Progressive Transition™
waveguide with a 25 mm (1 in) exit
compression driver
u
Dual Neutrik NL4 connectors plus screw
terminals
u
Multiple Attachment Points for Ultimate
Flexibility
Applications:
u
Performing Arts Facilities
u
Houses of Worship
u
Sports Facilities
u
Multi Media Spaces
u
Retail Spaces
u
Presentation Suites
u
Educational Facilities
u
Portable Audio-Visual Systems
The AC26 is an ultra-compact fullrange loudspeaker system designed to
provide maximum bandwidth and SPL
in a single system package and yet be
visually unobtrusive. The enclosure
design allows for installation very close
to walls and ceilings making it an ideal
choice for under balcony, column, or wall
mounting. The high frequency device is
a 1” exit compression driver integrated
into a newly designed 90° x 90° PT™
(Progressive Transition) waveguide
providing even coverage throughout the
intended listening area. The combination
exhibits smooth power response resulting
in extremely natural voicing. The AC26
utilizes dual 6.5” Symmetrical Field
Geometry (SFG™) LF Transducers each
with a copper-clad aluminum edge wound
2” voice coil and a copper-clad pole piece
that improves performance by reducing
voice coil inductance and distortion.
In addition Filtered Array Technology
(FAT™) is utilized to independently
control the dual woofers for magnitude
and phase response resulting in smoother
power response and constant coverage.
The rugged multi-ply hardwood
enclosure is designed to work in the
vertical plane as well as in the horizontal
plane. Mounting points are provided
for an optional U-bracket and for an
OmniMount® type bracket. The AC26
is also equipped with attachment points
located on the bottom of the enclosure
for a stand mount accessory.
The rugged plywood enclosure features
JBL’s textured DuraFlex™ finish and
is equipped with a heavy duty powder
coated steel, foam-backed grille.
AC26
System with 2 - 6.5” LF
Specifications:
System:
Frequency Range (-10 dB): 55 Hz - 20 kHz
Horizontal Coverage: 90°
Vertical Coverage: 90°
Directivity Factor (Q): 7 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 8 dB (avg. 500 Hz - 16 kHz)
System Sensitivity1: 92 dB SPL/1W/1m
Rated Maximum SPL (1m)2: 117 dB
System Nominal Impedance: 8 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 180 W / 360 W / 720 W
AES Standard Power Rating4: 350 W
Crossover: 2.2 kHz
Transducers:
Low Frequency Driver:
High Frequency Driver: 1 x 2414H 25 mm (1 in) exit compression driver, 25 mm (1 in) voice coil
High-Frequency Waveguide: PT-B99HF-1
Physical:
Enclosure: 12 mm and 15 mm exterior grade multi-ply hardwood plywood
Suspension Attachment: 6 x M8 points; 1 top, 3 bottom, 2 rear.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX available upon request
Grille: Powder coated 16 gauge perforated steel, acoustically transparent foam
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant covered
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental ratings, use
Dimensions (H x W x D): 539.8 x 199.4 x 226.1 mm
Weight: 11.0 kg (24.3 lb)
Optional Accessories: MTU-26 U-Bracket
1
On axis SPL measured in far field and referenced to 1 meter by inverse square law. Average from 300 Hz to 16 kHz.
2
Calculated based on system sensitivity and continuous power handling.
3
IEC shaped pink noise, 6 dB crest factor, 100 hour duration.
4
AES standard 2 hour duration, with IEC system noise spectrum.
5
WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements. WRX for direct exposure
or extreme environments, such as tropical or beach, or in areas with salt air, extreme high humidity or rapid changes in temperatures.
See WRC/WRX configuration sheet for details.
JBL continually engages in research related to product improvement. Changes introduced into existing products without notice are a
routine expression of that philosophy.
Frequency Response (+/-3 dB): 70 Hz - 18 kHz
2 x JBL 226J, 165 mm (6.5 in) SFG™ driver with 50 mm (2 in) edge wound
voice coil
4 x M6 rear for OmniMount® 30.0 or MultiMount® MM-022-BT,
MM-024-BT, MM-020-CM.
backing (grille cloth backing on white units)
barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10
AGW) wire or max width 9 mm (.375 in) spade lugs. NL4’s +1/-1 in
parallel with barrier strip (+2/-2 loop through).
WRC or WRX.
(21.3 x 7.8 x 8.9 in)
365469-001, M8 x 38mm Tee Knob Thumbscrew Kit for use with
BMB-200k or K&M 195/8 stand mount accessory.
u AC26 Ultra Compact 2-way Loudspeaker System with 2 - 6.5” LF
360
-6 dB Beamwidth (degrees)
(226.1)
20
100
10
10
10
0000
100
Impedance (Ohms)
20000
105
Beamwidth
100
Horizontal
Vertical
10
20 100 1000 1000020000
Frequency (Hz)
Directivity Index, Q
10
Directivity Index (DI), dB
0
20 100 1000 1000020000
Frequency (Hz)
10
1
Frequency Response, 1W/1m
95
85
SPL (dB)
75
65
20 100 1000 10000
2 half space
4 free field
Frequency (Hz)
Dimensions
Dimensions in “in” (mm)
For more detailed dimensional information, refer to Application Data Sheet.
For AE & AE Compact Series WRC and WRX versions please visit the JBL Pro website
at http://www.jblpro.com/www/products/installed-sound/ae-series#.V63kVfkrLIV to
download Drawings.
5.1
(128.7)
Horizontal Off-Axis Frequency Response
0
-10
Attenuation (dB)
-20
-30
20 100 1000 1000020000
Frequency (Hz)
Vertical Up Off-Axis Frequency Response
0
-10
Attenuation (dB)
Directivity Factor (Q)
-20
-30
20 100 1000 1000020000
Frequency (Hz)
Vertical Down Off-Axis Frequency Response
0
-10
Attenuation (dB)
-20
-30
20 100 1000 1000020000
Frequency (Hz)
Impedance
10
0 deg
10 deg
20 deg
30 deg
40 deg
50 deg
60 deg
70 deg
80 deg
0 deg
10 deg
20 deg
30 deg
40 deg
0 deg
10 deg
20 deg
30 deg
40 deg
8.9
4.5
(113.0)
21.3
(539.8)
4.5
(115.0)
20°
TOP
FRONT
BOTTOM
2.4
(61.7)
R14.0
(R355.6)
4.5
(113.0)
SIDES
9.3
(236.9)
4.5
(113.8)
11.9
(301.8)
2.0
(50.8)
4.3
(108.0)
7.8
(199.4)
REAR
1.8
(46.7)
1
20 100 1000 100002
Frequency (Hz)
Measurements obtained in full passive crossover mode with no signal processin g.
Graphs are from unaltered measured data.
Attachment Points For Third Party Accessories:
Bottom: Ultimate Support™ BMB-200K; Konig & Meyer 195/8
Rear: OmniMount 30.0; Konig & Meyer 24470; MultiMount®
MM-022-BT, MM-024-BT, MM-020-CM
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
A Harman International Company
© Copyright 2016 JBL Professional
SS AC26
CRP 5M
8/16
Loading...