JBL AC18/95 Datasheet

Compact 2-way Loudspeaker

Key Features:

䉴

Compact enclosure

䉴

205 mm (8 in) LF transducer

䉴

90° x 50° Progressive Transition™ Field Rotatable Waveguide with a 25 mm (1 in) exit compression driver

䉴

Dual Neutrik NL4 connectors plus screw terminals

䉴

Multiple Attachment Points for Ultimate Flexibility

Applications:

䉴

Performing Arts Facilities

䉴

Houses of Worship

䉴

Sports Facilities

䉴

Multi Media Spaces

䉴

Retail Spaces

䉴

Presentation Suites

䉴

Educational Facilities

䉴

Portable Audio-Visual Systems

The AC18/95 is a compact full-range loudspeaker system designed to provide maximum bandwidth and SPL in a single system package and yet be visually unobtrusive. The enclosure design allows for installation very close to walls and ceilings making it an ideal choice for under balcony, column, or wall mounting. The high frequency device is a 1" exit compression driver integrated into a newly designed 90° x 50° rotatable PT™ (Progressive Transition) waveguide providing even coverage throughout the intended listening area. The combination exhibits smooth power response resulting in extremely natural voicing. The AC18/95 utilizes an 8" Symmetrical Field Geometry (SFG™) LF Transducer with a copper-clad aluminum edge wound

2.5" voice coil and a copper-clad pole piece that improves performance by reducing voice coil inductance and distortion.

The rugged multi-ply hardwood enclosure is designed to work in the vertical plane as well as in the horizontal plane. Mounting points are provided for an optional U-bracket and for an OmniMount AC18/95 is also equipped with attachment points located on the bottom of the enclosure for a stand mount accessory.

The rugged plywood enclosure features JBL’s textured DuraFlex™ ﬁnish and is equipped with a heavy duty powder coated steel, foam-backed grille.

type bracket. The

AC18/95

System with 1 - 8" LF

Speciﬁcations:

System:

Frequency Range (-10 dB): 52 Hz - 20 kHz

Frequency Response (+/-3 dB): 63 Hz - 19 kHz

Long-Term System Power Rating

Transducers:

Physical:

Optional Weather Resistant Versions5: WRC & WRX available upon request

On axis SPL measured in far ﬁeld and referenced to 1 meter by inverse square law. Average from 300 Hz to 16 kHz.

Calculated based on system sensitivity and continuous power handling.

IEC shaped pink noise, 6 dB crest factor, 100 hour duration.

AES standard 2 hour duration, with IEC system noise spectrum.

WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements. WRX for direct exposure or extreme environments, such as tropical or beach, or in areas with salt air, extreme high humidity or rapid changes in temperatures. See WRC/WRX conﬁguration sheet for details.

JBL continually engages in research related to product improvement. Changes introduced into existing products without notice are a routine expression of that philosophy.

Horizontal Coverage: 90°

Vertical Coverage: 50°

Directivity Factor (Q): 8 (avg. 500 Hz - 16 kHz)

Directivity Index (DI): 9 dB (avg. 500 Hz - 16 kHz)

System Sensitivity1: 93 SPL dB/1W/1m

Rated Maximum SPL (1m)2: 117 dB

System Nominal Impedance: 8 Ohms

(Continuous/Program/Peak): 250 W / 500 W / 1000 W AES Standard Power Rating4: 375 W

equency Driver:

Low Fr

High Frequency Driver: 1 x 2408H-1 25 mm (1 in) exit compression driver, 38 mm (1.5

High-Fr

equency Waveguide: PT-D95HF-1 (Field Rotatable)

Suspension Attachment: 6 x M8 points; 1 top, 3 bottom, 2 rear.

Input Connectors: Neutrik Speakon

Environmental Speciﬁcations: Mil-Std 810; IPx3 per IEC529. For higher environmental

Dimensions (H x W x D): 469.9 x 237.5 x 254.0 mm

Optional Accessories: MTU-18 U-Bracket

Crossover: 2.1 kHz

1 x JBL 228H, 205 mm (8 in) SFG™ driver with 64 mm (2.5 in) edge wound voice coil

in) voice coil

Enclosure: 12 mm and 15 mm exterior grade multi-ply hardwood

plywood

4 x M6 rear for OmniMount®30.0.

Finish: Black DuraFlex™ ﬁnish. White (-WH) available upon request.

Grille: Powder coated 16 gauge perforated steel, acoustically

transparent foam backing (grille cloth backing on white units)

covered barrier strip terminals. Barrier terminals accept up to

5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade lugs. NL4’s +1/-1 in parallel with barrier strip (+2/-2 loop through).

ratings, use WRC or WRX.

(18.5 x 9.4 x 10.0 in)

Weight: 12.8 kg (28.2 lb)

365469-001, M8 x 38 mm Tee Knob Thumbscrew Kit for use with BMB-200k or K&M 195/8 stand mount accessory.

NL4 (2 wired in parallel), plus CE-compliant

䉴 AC18/95 Compact 2-way Loudspeaker System with 1 - 8" LF

360

Beamwidth

100

Horizontal

-6 dB Beamwidth (degrees)

Directivity Index, Q

Directivity Index (DI), dB

Frequency Response, 1W/1m

105

SPL (dB)

Vertical

20 100 1000 10000 20000

Frequency (Hz)

Horizontal Off-Axis Frequency Response

-10

Attenuation (dB)

-20

-30 20 100 1000 10000 20000

100

Vertical Up Off-Axis Frequency Response

-10

Attenuation (dB)

Directivity Factor (Q)

-20

-30 20 100 1000 10000 20000

Vertical Down Off-Axis Frequency Response

-10

Attenuation (dB)

-20

Frequency (Hz)

0 deg

10 deg

20 deg

30 deg

40 deg

50 deg

60 deg

70 deg

80 deg

0 deg

10 deg

20 deg

30 deg

40 deg

0 deg

10 deg

20 deg

30 deg

40 deg

20 100 1000 10000 2000

Frequency (Hz)

Dimensions

Dimensions in “in” (mm)

For more detailed dimensional information, refer to Application Data Sheet

6.5

(165.4)

10.0

(254.0)

R20.0

5.0

(127.0)

(R508.0)

(147.3)

5.8

SIDES

8.0

(201.9)

5.0

(127.0)

18.5

(469.9)

18°

TOP

FRONT

9.7

(246.4)

2.0

(50.8)

4.3

(108.0)

9.4

(237.5)

REAR

2.1

(53.1)

-30 20 100 1000 10000 20000

Impedance

100

Impedance (Ohms)

20 100 1000 10000 20000

Frequency (Hz)

Measurements obtained in full passive crossover mode with no signal processing. Graphs are from unaltered measured data.

Attachment Points For Third Party Accessories:

Bottom: Ultimate Support™ BMB-200K; Konig & Meyer

195/8

Rear: OmniMount 30.0; Konig & Meyer 24470 or 24480;

Allen Products MM022

4.5

(115.0)

BOTTOM

2.3

(57.6)

JBL Professional 8500 Balboa Boulevard, P.O. Box 2200 Northridge, California 91329 U.S.A.

A Harman International Company

SS AC18/95 CRP 5M 05/08