JBL 800 User Manual

Project ArrayTM – 800 Array

High-performance loudspeaker

To deliver extraordinary sonic performance in the finest home theater and music systems, JBL® Project ArrayTM models utilize
technologies directly derived from the company’s flagship K 2
Project Array models include the 1400 Array, 1000 Array and 800 Array floorstanding and bookshelf loudspeakers; the 880 Array
center channel loudspeaker; and the 150 0 Array powered subwoofer with built-in 1000-watt amplifier. To achieve its superla
tive performance, the 800 Array loudspeaker features newly designed Bi-Radial
in a freestanding configuration. This design eliminates enclosure dif fraction effects to provide precise, ultra-stable imaging,
along with a wider, deeper, more three-dimensional soundstage.

Highlights

Aluminum compression driver

Titanium tweeter

Classic JBL professional

bass driver

Unique enclosure

Seamless system integration

Key Specifications

Description: Three-way, 200mm (8") bookshelf speaker

Frequency response: 55Hz – 40kHz

Crossover frequencies: 1000Hz/8kHz

Power handling: 200 Watts

Sensitivity (2.83V@1m): 88dB

Nominal impedance: 8 Ohms

Dimensions (H x W x D): 743mm x 273mm x 356mm

(29-1/4" x 10-3 /4" x 14")

Weight: 18kg (4 0 lb)

®

Series loudspeakers and professional recording studio monitors.

®

-horn compression drivers mounted ver tically

-

Project ArrayTM – 800 Array

High-performance loudspeaker

Features

Three-way floorstanding bookshelf design featuring:

A 200mm (8") polymer-treated pulp-cone low-frequency driver with 38mm (1-1/2 ") copper voice coils wound on

an aluminum former.

A 045Ti 25mm (1") pure-titanium ultrahigh-frequency compression driver.
A 175Nd-3 44mm (1-3/4") Aquaplas-treated aluminum-dome high-frequency compression driver.

Utilizes a ver tically oriented, enclosure-less Bi-Radial-horn configuration to provide spacious, dynamic and natural sound

qualit y.

Incorporates a high-per formance JBL 175Nd high-frequency compression driver with an aluminum edge-wound voice coil,

neodymium motor assembly and Aquaplas-treated aluminum dome, mated to a rapid-flare phase plug and the Bi-Radial-horn
assembly.

015M transducer features a 22mm (0.88" ) Mylar® diaphragm, directly mounted to the top of the Bi-Radial horn. To achieve

tight, musically natural bass response, the 800 Array uses a 200mm (8") polymer-treated pulp-cone woofer.

Built to the same uncompromising quality and construction standards as every Project Array model, the 800 Array is equally

adept at movie soundtrack and music reproduction, with a smooth tonal balance; transparent, musically inviting midrange;
and open, ex tended high frequencies.

Harman Consumer Group, Inc.
2, route de Tours, 72500 Château du Loir, France • 250 Crossways Park Drive, Woodbury, NY 11797, USA • 8500 Balboa Boulevard, Northridge, CA 91329, USA

www.jbl.com

© 2007 Harman International Industries, Incorporated. All rights reserved. JBL, Bi-Radial and K2 are trademarks of Harman International Industries, Incorporated,
registered in the United States and/or other countries. Project Array is a trademark of Harman International Industries, Incorporated. Mylar is a registered trade­mark of E.I. du Pont de Nemours and Company.

Features, specifications and appearance are subject to change without notice.