JBL 700, AXYS 700 User Manual
User Guide
AXYS®UniAmp Power Amplifier Module
Model 700
User Guide - AXYS®UniAmp Power Amplifier Module , Model 700
REFERENCE TO EC STATEMENT OF CONFORMITY
This document confirms that products manufactured by
Duran Audio bearing the CE label meet all the requirements in the EMC directive 2004/108/EC and LV directive
2206/95/EC laid down by the Member States Council for
adjustment of legal requirements. Furthermore the products
comply with the rules and regulations from 30 August 1995
referring to the electromagnetic compatibility of devices.
Duran Audio products bearing the CE label comply with the
following harmonised or national standards:
EMC:
EN 55103-1 :1997
EN 55103-2 :1997
Safety:
IEC 60065 :2002
Mains Harmonics:
EN 61000-3-2 :2001
Insulation:
Class1
Duran Audio BV
Koxkampseweg 10 5301
KK Zaltbommel The Netherlands
Tel: +31 418 515583
Fax: +31 418 518077
Zaltbommel, February 2009.
USER’S NOTICE AND DISCLAIMER:
No part of this manual including the software described
in it may be reproduced, transmitted, transcribed, stored
in a database system or translated without the express
written permission of Duran Audio BV.
Documentation kept by the end user for back-up purposes
is excluded from the above.
All products and corporate names mentioned in this manual may be registered trademarks or copyrights of their
respective companies. They are used here for indicative
purposes only.
The information contained in this manual has been carefully checked for accuracy; however no guarantee is given
with respect to its correctness. Duran Audio BV accepts no
responsibility or liability for any errors or inaccuracies that
may appear in this manual or the products and software
described in it.
Specifications and information contained in this manual
are subject to change at any time without notice.
© 2009 Duran Audio BV. All rights reserved.
2 2
00905/UAUG_v1.0
User Guide - AXYS®UniAmp Power Amplifier Module , Model 700
TABLE OF CONTENTS
Reference to Statements of Conformity ..................2
User’s Notice and disclaimer ..........................2
1. Important Safety Instructions ........................4
2. Introduction .....................................5
Applicable models and variants ...................5
3. Connector and wiring details ........................6
Connector panel diagram ........................6
AC Mains ....................................6
Audio connections .............................7
Network connections ...........................8
4. Presets .........................................8
Recalling Presets ..............................8
5. Reset ...........................................9
6. Other ...........................................9
Status LED ...................................9
Circuit breaker ................................9
Cooling ......................................9
7. Configuring with WinControl .......................10
Connecting to a PC ............................10
Basic software options .........................10
8. Appendix .......................................11
Network cables ...............................11
Specifications ................................11
200905/UAUG_v1.0
3
1.IMPORTANT SAFETY INSTRUCTIONS
This symbol is intended to alert you to the presence of uninsulated dangerous voltages within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
This symbol is used throughout this manual
and is intended to alert you to the presence of
important instructions.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarised or
grounding-type plug. A grounding-type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
User Guide - AXYS®UniAmp Power Amplifier Module , Model 700
12) Use only with the cart, stand, tripod, bracket or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does
Warning -To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or moisture.
Warning - To disconnect this apparatus from the mains power supply, turn off the power at the switch labelled Circuit
breaker on the connector panel and remove the connector
from the mains input socket labelled Mains Power Input.
Warning - Do not expose the internal backup battery to excessive heat such as sunshine, fire or the like. Note that this
battery is not user-replaceable.
4
200905/UAUG_v1.0
Loading...