Page 1
JBL ON STAGE™* 4 0 0 iD
HIGH-PERFORMANCE SPEAKER DOCK FOR iPod
iPod touch not included.
USER GUIDE
English............................... 3
English
Page 2
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ THE FOLLOWING PRECAUTIONS BEFORE USE:
Read these instructions, heed all warnings and keep for future reference.
•
Do not use this apparatus near water.
•
Clean only with a dry cloth.
•
Do not block any ventilation openings; a minimum distance of 10mm around the entire apparatus is required for sufficient ventilation.
•
No naked flame sources, such as lighted candles, should be placed on or near the apparatus.
•
Attention should be drawn to the environmental aspects of battery disposal.
•
The apparatus is to be used in moderate climates only.
•
Do not install near any heat sources such as radiators, heat registers, stoves or other apparatuses (including amplifiers) that produce heat.
•
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarizing plug has two blades with one wider than the other. A grounding type
•
plug has two blades and a third grounding prong. The wide blade or third prong is provided for safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched, particularly at the plugs and convenience receptacles, and at the point where they exit from the
•
apparatus.
Only use attachments/accessories specified by the manufacturer.
•
Unplug this apparatus during lightning storms or when unused for long periods of time.
•
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or
•
plug is damaged, liquid has been spilled or objects have fallen into the apparatus, or the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
To be completely disconnected from the power input, the main plug of the AC/DC adapter shall be disconnected from the main.
•
The main plug of the AC/DC adapter should not be obstructed OR should be easily accessed during intended use.
•
The marking information is located at the bottom of the apparatus.
•
The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
•
The apparatus and AC/DC adapter shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the
•
apparatus and AC/DC adapter.
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER-SERVICEABLE PARTS INSIDE THIS UNIT.
•
PLEASE REFER SERVICING TO QUALIFIED HARMAN CONSUMER GROUP, INC., SERVICE PERSONNEL.
Never remove grille covers in order to service the speaker system. The speaker system does not contain any user-serviceable parts.
•
IMPORTANT NOTE FOR ALL ELECTRONIC PRODUCTS:
Before inserting or unplugging audio cables from the source device’s headphones or line-level output jacks, it is good practice to turn off the device
first. This will prolong the life of your unit, help protect your device from static electricity and prevent potential damage.
4
JBL ON STAGE 400
iD USER GUIDE
Page 3
FCC STATEMENT AND WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and
2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient the receiving antenna. •
Increase the separation between the equipment and receiver. •
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •
Consult the dealer or an experienced radio/TV technician for help. •
Any special accessories needed for compliance must be specified in the instruction manual.
MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT UNDER FCC RULES.
The normal function of the product may be disturbed by strong electromagnetic interference. If so, simply reset the product to resume normal operation by
following the instruction manual. In case the function could not resume, please use the product in another location.
English
THE LIGHTNING
FLASH AND
ARROWHEAD
WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU
TO DANGEROUS
VOLTAGE INSIDE
THE PRODUCT.
CAUTION
RISK OF ELECTRIC
SHOCK — DO NOT OPEN
CAUTION: TO REDUCE
THE RISK OF SHOCK, DO
NOT REMOVE COVER. NO
USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
THE EXCLAMATION
POINT WITHIN
THE TRIANGLE IS
A WARNING SIGN
ALERTING YOU
TO IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
WARNING: TO PREVENT FIRE OR
ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: THE APPARATUS SHOULD
NOT BE EXPOSED TO DRIPPING OR SPLASHING
AND NO OBJECTS FILLED WITH LIQUID, SUCH AS
VASES, SHOULD BE PLACED ON THE APPARATUS.
IMPORTANT:
THE APPROPRIATE ADAPTER MUST BE INSTALLED BEFORE
INSERTING YOUR iPod INTO THE JBL
THAT THE CONNECTOR FOR THE iPod IS PROPERLY ALIGNED
WITH THE JBL PRODUCT’S CONNECTOR WHEN INSTALLING
YOUR iPod. FAILURE TO DO SO MAY CAUSE PERMANENT
DAMAGE TO THE CONNECTOR FOR THE iPod, RENDERING
THE iPod INOPERABLE.
®
PRODUCT. MAKE SURE
WWW.JBL.COM
5
Page 4
JBL ON STAGE™* 400ID
HIGH -PER FORMA NCE SPE AKER DOCK FOR iPod
™*
The JBL On Stage
end, professional component audio systems, we boast an audio heritage, combined with continual research, that has provided the unique
technologies built into the JBL On Stage 400ID system.
This complete iPod docking sound system is the new centerpoint of your personal entertainment space. Imagine a combined subwoofer
and satellite sound system in one place, with no extra wires running across your table or desk surface. The compact JBL On Stage 400ID
high-performance sound center is controllable by remote, up to 15 ft. away. Connected to your iPod, MP3 player or any other music source
with an audio jack, the system produces clean, powerful sound. Take complete control of your music and videos with the JBL On Stage 400ID
speaker dock.
COMPATIBILITY
The JBL On Stage 400ID system is compatible with all docking versions of the iPod. A stereo mini jack connection also allows you to
enjoy high-quality audio from a variety of other devices, such as iPod shuffle, MP3 and CD players, desktop computers (all platforms),
satellite radio and laptops.
REMOTE
Just a touch of the Volume controls increases or decreases the volume. Using the Navigation controls, browse songs and photos,
change tracks and settings, and more. With the JBL On Stage 400ID remote, you have complete control of your iPod, as though it were in
your hand.
ONEPOINT DESIGN
The OnePoint iPod connector provides the connection to your computer. Connect a standard USB cable (not included) to the rear of the
JBL On Stage 400ID unit, and every time you dock your iPod, you will have the connection needed for synchronizing and charging.
EVERCHARGE TOPOLOGY
The unit charges your iPod, even when not connected to the computer or when the system is off.
COMPACT DESIGN
The JBL On Stage 400ID loudspeaker dock is a complete 2.1-channel audio system, in one easy-to-place footprint.
DIGITAL POWER AND DSP
The system delivers sound with a powerfully tuned digital audio path. The clean and compact digital amplification, coupled with DSP
(digital signal processing) equalization, efficiently provides the transducers with cool-running power.
400ID high-performance speaker dock is the latest JBL innovation. As a longtime leader in the manufacturing of high-
6
JBL ON STAGE 400
iD USER GUIDE
Page 5
MENU
JBL
JBL
UNPACKING YOUR JBL ON STAGE™* 400ID
DC-In
DC-In
Power
Power
Audio-In
Audio-In
USB
USB
Carefully unpack your speaker system and identify all its components:
English
JBL On Stage
™*
400ID Adapters for iPod IR remote Audio cablePower supply
QUICK SETUP INSTRUCTIONS
Plug the barrel end of the power supply cord into the power jack and plug the other end into the wall.
•
Next, push the power switch; a green LED will light up, indicating that the unit is powered.
•
Find the correct adapter for your iPod, then firmly place it into the docking area shown.
•
Next, place your iPod into the dock, making sure your iPod is firmly seated.
•
Adjust the volume, using (+) to increase and (–) to decrease. Press both to mute the JBL On Stage 400ID unit.
•
Press either button to unmute.
Power
Power
Switch
Jack
USB
Port
Auxiliary
Port
WWW.JBL.COM
7
Page 6
SPECIFICATIONS TROUBLESHOOTING
JBL ON S TAGE™* 400 iD SOUN D QUALITY
Frequency Response: 40Hz – 20kHz
Power Consumption: 55 Watts maximum
JBL On Stage
(45mm) neodymium and four Odyssey
™*
400ID Transducers: One Atlas™
®
(25mm)
Power: 1 x 30 Watts (woofer)
2 x 15 Watts (tweeters), at 1% THD
Input Impedance: >10k Ohms
Signal-to-Noise Ratio: >85dB
Input Sensitivity: 250mV RMS for rated power output
Power (USA/Canada): 120 Volts, 60Hz AC
Power (Europe/UK): 220 – 240 Volts, 50Hz or 60Hz AC
Power (Japan): 100 Volts, 50Hz or 60Hz AC
Power (Australia): 240 Volts, 50Hz or 60Hz AC
UL/CUL/CE-Approved
Dimensions: 14-1/4" x 7-3/16" x 3-3/4"
(W x D x H) (362mm x 183mm x 95mm)
Weight: 3.8 lb (1.7kg)
Power Supply Manufacturer: JBL, Inc.
Power Supply Model: 700-0084
Symptom Possible Problem Solution Note
No sound from the
JBL On Stage 400ID unit
Sound comes from one
side/channel only
Distortion (static,
crackling or
hissing sounds)
Too much bass
or treble
JBL On Stage 400ID
unit emits a loud hum or
buzzing noise
Speaker system experiences radio frequency
interference or picks up
a radio station
No power to the unit Make sure the wall power outlet or
Incorrect source selection Make sure the iPod is properly docked
iPod or audio cable is not
seated properly
Noise may be caused
by interference from a
monitor, cell phone or
other transmitting device
JBL On Stage 400ID is being
overdriven by an amplified
audio source.
Volume level may be
too high
Check the EQ setting on
your iPod or source device
Input cables are not
plugged in properly
Input cable may be picking
up interference
power strip has power. Make sure all
switches for the outlet/power strip are
on and that all switches for the speaker
system are on.
or that the auxilary cable is properly
connected to an external audio device.
Turn up the volume. Check the system
with a known good source, such
as your iPod. Connect the Auxiliary
Port Cable to the headphone jack on
your iPod.
Make sure the iPod or Auxiliary Port In
cable is seated all the way into the
JBL On Stage 400ID unit.
Turn monitor off to see whether noise is
eliminated. Move JBL On Stage 400ID
unit’s cables farther away from monitor.
Make sure that the JBL On Stage 400ID
unit is connected to an appropriate
source device.
Make sure all signal cables are
inserted snugly into receptacles.
Check volume of source device.
Some devices will distort the output
signal if the volume is set to Maximum.
We recommend that the source device
EQ be set to Flat or Off.
Check input cable connection.
Wrap up excess input cable, in order to
make it as short as possible.
Is the LED on? If not,
power is not getting
to your JBL On Stage
400ID system; try the
solutions shown.
If you want to use a
longer cable, make
sure it’s a 3.5mm
mini-jack stereo
male-to-male cable
8
JBL ON STAGE 400
iD USER GUIDE
Page 7
TROUBLESHOOTING
CHA RGING A ND SYNC ING
Symptom Possible Problem Solution Note
iPod will not charge Wrong adapter is used Make sure correct adapter is used for your specific
The iPod is not making full contact with the
docking station
iPod is not recognized by the
computer when docked into
the JBL On Stage
or there is an error in data
transfer
™*
400ID unit,
Third-party accessories may be conflicting
with the USB signal
USB port is not supplying enough power
DISPOSAL: Do not dispose of this
product as unsorted municipal
waste. Collection of such waste
separately for special treatment is
necessary.
IMPORTANT: Use UM4/AAA/LR03
alkaline-type nonrechargeable
batteries only.
iPod model.
Make sure the iPod is seated securely into the
docking station.
Make sure you do not have the JBL On Stage 400ID
unit connected to a USB hub; connect the unit
directly into the computer’s USB port.
Try connecting the USB cable to another port on the
back of the computer.
English
WWW.JBL.COM
9
Page 8
JBL and Odyssey are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. Atlas is a trademark of Harman
International Industries, Incorporated.
The trademark On Stage is used with permission of OSA International, Inc.
*
iPod is a trademark of Apple Inc., registered in the U.S. and other countries. Shuffle is a trademark of Apple Inc. “Made for iPod” means that an electronic accessory has been
designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
Harman Consumer Group, Inc.
8500 Balboa Boulevard, Northridge, CA 91329 USA
516.255.4525 (USA only)
www.jbl.com
© 2008 Harman International Industries, Incorporated. All rights reserved. Tous droits réservés.
Document Number: 950-0233-001
Loading...