JBL 2450-H, 2450-J Brochure
Professional Series
Key Features:
100 watts continuous program
at 500 Hz
150 watts continuous program
at 1 kHz or higher
Neodymium rare-earth magnet
structure provides high output, light
weight, and compact size
Coherent Wave™ phasing plug design
for increased high-frequency output
100 mm (4 in) pure titanium
diaphragm with radial-rib topology
and patented three-dimensional diamond pattern suspension
100 mm (4 in) edgewound
aluminum voice coil
49 mm (2 in) throat exit diameter
The model 2450H/J is a professional
quality, compact size and light weight
large-format compression driver that
incorporates a neodymium rare-earth
magnet assembly designed by extensive computer modeling including
finite element analysis. The new magnet assembly provides the equivalent
electromechanical conversion efficiency (B1 factor) at two-thirds
the size and one-third the weight
required by previous large-format
compression driver designs.
The newly-developed Coherent
Wave phasing plug assembly consists
of four die-cast annular aperture
structures of constant path length to
provide in-phase combining of diaphragm output at the driver’s exit.
This optimized configuration allows
coherent summation of energy up to
much higher frequencies than previous designs, with an attendant increase in perceived high-frequency
clarity.
The new diaphragm design includes
JBL’s exclusive three-dimensional
diamond pattern surround¹ which
reduces membrane stresses in the
diaphragm support structure and
extends diaphragm life. The depth of
the diamond pattern is closely controlled during the manufacturing
process to provide predictable frequencies for the 2nd and 3rd normal
resonance modes and for the basic
suspension resonance mode.
2450H/J
Compression Driver
Specifications:
Throat Diameter: 49 mm (2 in)
Nominal Impedance: 2450H 8 ohms
Minimum Impedance: 6 ohms (H), 12 ohms (J) @ kHz
DC Resistance: 4.3 ohms (H), 8.5 ohms (J) ± 10% @ 25%
Power Capacity¹: 100 W continuous program above 500 Hz
Sensitivity: 111 dB SPL, 1 W @ 1 m on-axis on horn²
Nominal Efficiency: 30% (500 Hz to 2.5 kHz)
Frequency Range:
Recommended Crossover:
Diaphragm: 0.05 mm (0.002 in) pure titanium
Voice Coil Diameter: 100 mm (4 in)
Voice Coil Material: Edgewound aluminum ribbon
Flux Density: 1.9 T (19,000 gauss)
B1 Factor:
Positive voltage to black terminal gives diaphragm motion toward the phasing plug
Dimensions: 167 mm (6 in) diameter
Mounting: Four ¼-20 threaded holes, 90° apart on 101.6 mm
Net Weight: 4.8 kg (10½ lb)
¹Continuous program is defined as 3 dB greater than continuous pink noise and is a conservative expresssion of the
transducer’s ability to handle normal speech and music program material. Continuous pink noise power ratings are rested
with pink noise input having a 6 dB crest factor, with a high-pass filter set at the specified lower limiting frequency for two
hours duration
²Sensitivity measured with 1 W input at 1 m distance on axis from the mouth of a horn with a Q off 3 averaged in the 2 kHz
octave band
³As specified by recognized standards organizations, sensitivity is measured with the driver coupled to a terminated tube.
The JBL sensitivity rating represents the SPL in a 25 mm (1 in) terminated tube, using a 1 mW input signal (0.126 V into
16 ohms) swept from 500 Hz to 2.5 kHz. The sensitivity rating with a 1 W input would be 30 dB greater.
2450J 16 ohms
5
150 W continuous program above 1 kHz
118 dB SPL, 1 mW on plane-wave tube³
500 Hz to 20 kHz
500 Hz or higher, 12 dB/octave minimum
12.7 (H) N/A
18 (J) N/A
139 mm (5
(4 in) diameter
in) depth
'U.S. Patent #4,324,312. Foreign patents pending.
2450H/J Compression Driver
High-temperature voice coil former materials and adhesives enable the 2450H/J to handle extremely high power
levels over extended periods of time. The voice coils
themselves are identical to previous JBL models, so that
impedance and network matching will be the same. After
manufacture, the frequency response of each driver is
tested for conformity to JBL’s rigid performance standards.
The model 2450H/J is ruggedly constructed to withstand the rigors of fixed and transportable commercial
applications. All cast parts and tolerances are held to the
same levels traditionally associated with JBL designs.
High-pressure press-fit assemblies combined with precisely machined interlocking parts assure extended resistance to mechanical shock. The JBL manufacturing process also permits the use of rim centered rather than pin
mounted diaphragms, for instant interchangeability and
ease of field service.
Architectural Specifications:
The compression driver shall consist of a neodymium magnetic
structure with all magnetic assembly parts machined from cast or
extruded billet stock. The phasing plug shall be assembled of concentric horns of equal path length to eliminate phase cancellations,
and it shall be coupled to a tapered throat. The diaphragm shall be
0.05 mm (0.002 in) pure titanium pneumatically drawn to shape and
embossed with radial reinforcing ribs to increase rigidity. High frequency response shall be controlled through the use of a threedimensional suspension structure. The voice coil shall be edgewound
aluminum ribbon of not less than 100 mm (4 in) in diameter, operating in a magnetic field of not less than 1.9 tesla (19,000 gauss).
Performance specifications of a typical production unit shall be as
follows: Measured sensitivity with a 1 mW input on a 25 mm (1 in) terminated tube, averaged from 500 Hz to 2.5 kHz, shall be at least 118
dB SPL. Measured sensitivity with a 1 W input at 1 m distance on axis
from the mouth of a horn with a Q of 6.3 averaged in the 2 kHz octave
band shall be at least 111 dB SPL. As an indication of electromechanical
conversion efficiency, the B1 factor shall be at least 18 newtons per
ampere. Frequency response, measured on a terminated tube, shall
be flat within ± 1 dB from 500 Hz to 3.3 kHz, with 6 dB / octave rolloff above that point. Nominal impedance shall be 8 (16) ohms and
power capacity shall be at least 100 watts normal speech or music
program material.
The compression driver shall be the JBL Model 2450H/J. Other
drivers will be considered for equivalency provided that submitted
data from a recognized independent test laboratory verify that the
above performance specifications are met.
Response on JBL 2380A Flat-Front Bi-Radial® Horn
Frequency response of the 2450J coupled to a JBL 2380A Flat-Front BiRadial® Horn, measured on-axis at a distance of 1 meter with a l-watt
(4.0 V RMS) input in a reflection-free environment, with impedance
vs. frequency curve. A horn with a pure exponential flare, such as typical radial horn designs, will exhibit greater high frequency output on
axis at the expense of lost annular coverage.
Response on Plane-Wave Terminated Tube
Frequency response and impedance modulus of Model 2450J coupled
to a 49 mm (2 in) diameter terminated plane-wave tube, with sensitivity referenced to a 25 mm (1 in) tube. This is the power response
of the transducer, and is the frequency response that will be obtained
on a true full-range constant directivity horn design, such as JBL’s
2360 series of Constant Coverage Bi-Radial® Horns.
JBL continually engages in research related to product improvement. New materials, production methods, and design refinements are introduced into existing products without
notice as a routine expression of that philosophy. For this reason any current JBL product
may differ in some respect from its published description, but will always equal or exceed
the original design specifications unless otherwise stated.
JBL Professional
8500 Balboa Boulevard, PO. Box 2200
Northridge, California 91329 U.S.A.
A Harman International Company
SS 2450H/J
CRP 5M
10/96
Loading...