INSTRUCTION MANUAL
CLM
Manual Tip Cleaner
This manual corresponds to the following reference:
CL8499
Packing list
The following items are included:
Sponge ............................ 1 un it
Ref. S0354
Manual Tip Cleaner ..... 1 unit
Ref. CL8499
Brass Wool ..................... 1 unit
Ref. CL6210
Manual ............................ 1 unit
Ref. 0028694
Features
Select the option to suit your needs and improve the thermal transfer of the tip.
Brass Wool
Ref. CL6210
Very ef fective cleaning
method. It leaves a small
layer of solder on the tip to
prevent oxidation between
cleaning and rewetting.
Splashguard
Ref. 0 0 17576
It prevents splashing of
solder particles when
using the brass wool. No need to hold the
Antisplash
Membrane
Ref. CL7882
Prevents splashing
and keeps the
work area clean.
ESD Safe Tip Wiper
Ref. CL8010
A temperature resistant
receptacle lets the
operator remove
excess solder by gentle
tapping or wiping.
Tapping: Wiping:
Tap to remove excess
solder.
Sponge
Ref. S0354
The least harmful
cleaning method. Keep
the sponge damp with
distilled water when
working to avoid tip wear.
Non-Slip Base
base while cleaning tips.
Use the slots to remove
remaining particles.
If the tip is very dirty, JBC recommends first cleaning it with the wiper to remove excess solde r and then with the
brass wool.
2
ON OFF
SWITCH
ON OFF
SWITCH
OFFON
SWITCH
OFFON
SWITCH
ON OFF
SWITCH
OFFON
SWITCH
Wiper Replacement
para manuales - color gris
First pull the wiper out.
Then inset the new one.
Wool/Brush Replacement
Open the splashguard and take
it off.
Membrane Replacement
Screw
and
Washer
Depending on the component used, replace the brass wool (1) or
brush (2) for a new one.
1
Fixing
Clamp
2
Membrane
Loosen the screw and remove
the screw, the washer.
Once the new membrane is positioned, place all the components back again and tighten the screw.
Then take out the fixing clamp. Finally the membrane. Replace
the membrane for a new one.
3
para manuales - color gris
Specifications
CLM
Manual Tip Cleaner
Ref. CL8499
- Total Net Weight: 877 g / 1.93 lb
- Package Dimensions / Weight: 130 x 100 x 98 mm / 936 g
(Lx W x H) 5.12 x 3.92 x 3.86 in / 2.06 lb
Complies with CE standards.
ESD Safe.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective par ts and labour.
Warrant y does not cover product we ar or misuse.
In order for the warranty to be valid, equipme nt must
be returned, postage paid, to the dealer where it was
purchased.
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
00 2 8 6 9 4 -12 07 2 2
Loading...