jbc TE-TB, TESE-2A, TESE-QA Instructions Manual

Precision Hot Air Station

Ref. TESE-A

www.jbctools.com

Manual ...............1 unit

Ref. 0019043

* Not supplied with TE-Q stations

Power cable ......1 unit

Ref. 0009417
(100V / 120V)
0009401 (230V)

Precision Hot Air Station

Ref. TESE-A

Heater hose set .............1 unit

Ref. TE-TB (100V / 120V / 230 V)

Stand ................................1 unit

Ref. TE-SD

TESE Control Unit ........1 unit

Ref. TESE-1A (100V / 120V)
TESE-2A (230V)

Extractor desk .............................................1 unit

Ref. 0008752*

Thermocouple type K ..................................1 unit

Ref. PH218

Suction Tube*
Ref. 0932330

Suction Cups*
Re f. 093 0110
Ø 10 - 0934050 (x3)
Ø 4.7 - 0934070 (x1)

Extractors*
Ref. E2184
E2064
E2052

Protectors*
Ref. P2220
P2230
P2235
P4000
P4010

Trip ods*
Ref. T2050
T2250

Nozzles

Ref. TN9080
TN9208
TN9209

Packing List

The following items should be included:

TE Accessory set

Ref. 0010300

2

www.jbctools.com

Features

Hot Air button
(On / Off)

Power Socket

Fuse

USB connector

Robot RS232
connector

P-005 Pedal connector

Equipotential
connector

Auxiliar
connector

Heating element

Suction Tube
For tripods and extractors

Heater Hose set

Ref. TE-TB

Stand

Ref. TE-SD

Thermocouple type K

Activates the suction pump

USB-A connector

www.jbctools.com

3

Adjustable Stand

Operation Modes

1. From the Tool Settings Menu, select the mode to activate the tool depending on the task.

2. The tool stops blowing when pressing the start/stop button.

If the stand is connected to the station and for safety it will also stop when returned to the stand.

Tool button Autostart Pedal*

Adjust the tool holder angle to suit your work position.

Press the start/stop button to
blow hot air.

The tool automatically starts
blowing hot air when lifted
from the stand.

Press the Pedal to blow hot
air and release to stop.
*The P-005 Pedal is not
supplied with this station.
See our website.

Press PressDo not press

4

Turn the tool off
and handle with
care. The heating
element and the
nozzle are still hot.

Quick Nozzle Changer

Changing nozzles quickly and safely.

Compatible Nozzles

The TE-TB Heater works with TN nozzles.
Find the model that best suits your soldering needs in www.jbctools.com

2

1

* Ref. Shape Ø Size

(mm)

Ø Size

(in)

* TN9209 Straight 3 0.12

* TN9208 Straight 4 0.16

* TN9080 Straight 5 0.20

TN9787 Bent 3 0.12

* Ref. Shape Ø Size

(mm)

Ø Size

(in)

TN9785 Bent 4 0.16

TN9782 Bent 5 0.20

TN8851 Bent 45º 3 0.12

TN8905 Bent 45º 4 0 .16

TN9561 Bent 45º 5 0.20

Straight Bent Bent 45º

Ø Ø Ø

* Included in TE Accessory set (Ref. 0010300)

www.jbctools.com

5

We recommend using the protector + tripod We recommend using the manual extractors

Protectors & Extractors

1 2 3 4

For small components (fig. 1 and 2). For large components (fig. 3 and 4).

Position the extractor with the
appropriate suction cup and
press the suction button.

Heat the component.

The component lifts off
automatically when the
solder melts.

Operation

3. Extracting1. Placing

2. Heating

6