Stand for Auto-Feed Iron
Ref. SF250-SE
INSTRUCTION MANUAL
www.jbctools.com
Packing List
The following items should be included:
The stand includes a sleep
mode that automatically
reduces the tip temperature
when the tool is in the stand.
Stand ........................................................... 1 unit
Ref. SF250-SE
Manual ......................................................... 1 unit
Ref. 0 022192
Stand for Auto-Feed Iron
Ref. SF250-SE
Features
Adjust the tool holder angle to
suit your work position.
To tool
To Control Unit
Stand
INSTRUCTION MANUAL
2
www.jbctools.com
Maintenance
Before carrying out maintenance or storage, always unplug the stand from the station.
- Use a damp cloth to clean the stand. Alcohol can be used only when cleaning the metal parts.
- Check periodically that the metal parts of the tool/stand are clean so that the station can check the
tool’s status.
- Periodically check all cables and tube connections.
- Replace any defective or damaged parts. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
Safety
- Do not use the stand for any purpose other than soldering or rework.
- The tool should be placed in the stand when not in use in order to activate the sleep mode.
The soldering tip, the metal part of the tool and the stand may still be hot even when the station
is turned off. Handle with care, including when adjusting the stand position.
- Avoid the contact of flux with skin or eyes to prevent irritation.
- Be careful with the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
working to avoid personal harm.
- Utmost care must be taken with liquid tin waste which can cause burns.
- This appliance can be used by children over the age of eight and also persons with reduced
physical, sensory or mental capabilities or lack of experience provided that they have been given
adequate supervision or instruction concerning use of the appliance and understand the hazards
involved. Children must not play with the appliance.
- Maintenance must not be carried out by children unless supervised.
It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.
www.jbctools.com
3
- Includes Sleep function
- Net Weight 1,15 kg (2.54 lb)
- Package weight 1,42 kg (3.12 lb)
- Package dimensions 342 x 155 x 120 mm (13.46 x 6.10 x 4.72 in)
Complies with CE standards
ESD protected
Specifications
002 2 192- 0 818-V00
This product should not be thrown in the garbage.
In accordance with the European directive 2002/96/EC, electronic equipment at the end of their life
must be collected and returned to an authorized recycling facility.
Manual in other languages available on our website
www.jbctools.com
Warranty
JBC’s two-year warranty covers this equipment
against all manufacturing defects, including the
replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In case of any manufacturing defect, the equipment
must be returned, postage paid, to the dealer where
it was purchased.
Loading...