Quality Station
Controller Module
Ref. QSC-A
www.jbctools.com
Packing List
The following items should be included:
Quality Station Controller Module ......................................................................................................... 1 unit
Ref. QSC-A
Manual ............................ 1 unit
Ref. 0020135
Quality Station
Controller Module
Ref. QSC-A
AC Adapter .................... 1 unit
Ref. 0021041
USB A/B Cable ........... 2 units
Ref. 0 021042
2
www.jbctools.com
Features
Power
Socket
Switch
Label
Reset
Key
1- Remote Connection:
If your network has DHCP, you can connect
the ethernet cable to the QSC and remotely
from another PC on the same network through
the address indicated on the label located
under the QSC.
2- Local Connection:
With an HDMI cable you can connect a screen,
a keyboard and a mouse to the QSC to see the
information directly without using any PC.
Connection
USB2.0
Connectors
USB-B
Connector
SATA 2.0
Connector
SV SATA
Power
LAN
Connector
HDMI Connector
Audio Output
TF Card
Wifi Antenna
www.jbctools.com
3
Settings
Network Screen
Local Screen (set by default)
Language
English
Host Name
QR device
name
Keyboard
English
Temperature
Celsius
Interface
Ethernet
Numbers
1.000,00
Mode: DHCP
Set by default
4
Settings
Update Screen
Start the
update
New software
version
www.jbctools.com
5
Exploded View
6
Specifications
QSC-A
- Weight: 400 gr (0.9 lb)
- Dimensions: 114 x 70 x 29 mm (4.5 x 2.8 x 1.1 in)
- Input Voltage: 5V dc
- Max. Input current: 3A
AC Adapter
- Input Voltage Range: 90 - 264 Vac
- Max. Input current: 0.6A
- Max. Output current: 3A
- Output Voltage: 5V dc
HARDWARE
- CPU: H3 Quad
- GPU: 5/HEVC 4K Mali400MP2 GPU @600MHz
OpenGL ES 2.0
- Memory (SDRAM): 2GB DDR3 (shared with GPU)
- Onboard Storage: 16GB EMMC Flash (fixed)
TF card (Max. 32GB) / MMC card slot (Max. 2T on 2.5 SATA disk)
- Onboard Network: 10/100/1000M Ethernet RJ45
- Onboard WIFI: Realtek RTL8189ETV, IEEE 802.11 b/g/n
- USB 2.0 Ports: Four USB 2.0 HOST, one USB 2.0 OTG
- Video Output: HDMI Connector
- Audio Output: 3.5 mm Jack Connector
Complies with CE standards.
ESD protected.
www.jbctools.com
7
This product should not be thrown in the garbage.
In accordance with the European directive 2002/96/EC, electronic equipment at the end of their life
must be collected and returned to an authorized recycling facility.
Manual in other languages available on our website
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
Register your warranty within 30 days of purchase
in www.jbctools.com/productregistration
0020135 -1217
www.jbctools.com
Loading...