jbc PSE-1A, PSE-2A, PSE-9A User Manual

www.jbctools.com

Four-Tool

Power Supply Unit

Ref. PSE-A

2

Packing List

The following items should be included:

Manual ......................................................... 1 unit

Ref. 0013606

Four-Tool Power Supply Unit ................................................................................................................ 1 unit

Ref. PSE-1A (120V)
PSE-2A (230V)
PSE-9A (100V)

ww w.jbc too ls.c om

Four-Tool

Power Supply Unit

Ref. PSE-A

Power Cord ................................................ 1 unit

Ref. 0010569 (230V)
0013671 (100/120V)

ww w.jbctoo l s.com

3

Features & Connections

Peripherals

Stand

PSE Unit

RJ12 connector for PSE

USB-B connector

RJ12 connector for
Robot or DME

Equipotential connection

RJ45 connector for L AN

Power Socket and fuse

to another PSE (Up to 5 per DME)

to PSE or DME

Compatibility

* The MNE Nitrogen Flow Regulator is required.
**If you need to connect the MS, MV, MN or FS modules, an adapter is required (Ref. IM2496).

Select the equipment that best suit your soldering or desoldering needs.

Basic working system Peripherals**

Control

Unit

Stand Tool

Cartridge

Range

MSE-A /

MVE-A

MNE-A FSE-A P-005

PSE

AD-SD

T210-A C210

T245-A C245

T470-A C245

DN-SE

T210-NA* C210

T245-NA*

C245

T470-NA*

AP-SD AP250-A C250

PA-SD PA120-A C120

HT-SD HT420-A C420

DS-SD DS360-A C360

DR-SD DR560-A C560

4

Centralize control of 5 PSE Power Supply Units in a single DME and work with as many as 24
tools simultaneously.

1. Connect the DME to the PSE units via the PSE connector (RJ12).

2. Connect the others PSE units as follows:

Increase x6 your DME’s possibilities

Four-Tool Control Unit

Ref. DME-A

Peripherals Peripherals Peripherals

up to 4 tools up to 4 tools up to 4 tools

PSE PSE in PSE inPSE out PSE out

Pneumatic Desoldering Module

Ref. MVE-A

Electric Desoldering Module

Ref. MSE-A

Pedal

Ref. P-005